The LATEST OSCAM-EMU FOR VARIOUS PLATFORMS Discussion and Request Thread

There are 2,331 replies in this Thread which was already clicked 466,224 times. The last Post () by Verdeoro.

    • Official Post

    I'm afraid those changes are merely superficial and are only related to Biss and its handling by dvbapi

    What we are all waiting for is support for new (or even some old ones still missing) hash modes, or icam, or the many other things that are currently making our hobby harder than ever. One of the main oscam coders sadly past away, so we need others to step up, and are willing to share patches openly and freely. Sadly a lot of this has now gone under ground, sometimes with very good reasons for doing so.

    thank you so much fegol. i owe you a big lunch ;-))

    adding autype = 1 in the client box fixed the problem.

    the EMMs are coming now and the card updated after 2 mins.


    2022/06/12 23:40:00 42C9822B r (reader) tivusat [nagra cak7] card has no right to decode this channel

    2022/06/12 23:40:00 4F4A72D9 c (ecm) updater (1856@000000/0000/007A/A9:A4468C3CE08B1BDA7551F8AB9CCF55DD): not found (120 ms) by tivusat (lg)

    2022/06/12 23:40:00 42C9822B r (reader) tivusat [nagra cak7] updater emmtype=shared, len=139 (hex: 0x8B), cnt=1: written (136 ms)

    2022/06/12 23:40:14 4F4A72D9 c (ecm) updater (1856@000000/0000/007A/A9:F8143E61F18199C6411D4D3032F7688C): found (144 ms) by tivusat (lg)


    2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] ROM: D N A S P 4 5 0

    2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] REV: R e v W 6 0

    2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] SER: ###########

    2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] CAID: 1856

    2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] Prv.ID: 00 00 54 11 (sysid)

    2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] -----------------------------------------

    2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] |id |tier |valid from |valid to |

    2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] +----+--------+------------+------------+

    2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] |5411|0000 |1992/01/01 |2022/08/13 |

    2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] |5412|0000 |1992/01/01 |2022/08/09 |

    2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] -----------------------------------------

    2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] Prv.ID: 00 00 00 00

    2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] Prv.ID: 00 00 54 12

    2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] ------------------------------------------


    I have one more issue.

    Newcamd user always gets au turned off.

    i never figured out why.

    it is cccam client using newcamd protocol.

    maybe i should just use oscam.


    2022/06/12 23:46:33 0055D504 c (newcamd) client connected to 8400 port

    2022/06/12 23:46:33 0055D504 c (client) encrypted newcamd:8400-client 127.0.0.1 granted (myuser, au=on (1 reader))

    2022/06/12 23:46:33 0055D504 c (newcamd) user myuser authenticated successfully (CCcam)

    2022/06/12 23:46:33 0055D504 c (newcamd) AU disabled for user myuser

    ##

    DCDi autype is now removed and oscam will automatically send the right type of emm to the server device.

    please, change oscam in both sides (server and client) with the updated ones attached here

    thanks

    ;

    hi guys,

    which newest/latest oscam for axas his twin + (openatv_6.4)

    i use professor mohamed online script:

    Code
    sh -c "$(wget https://raw.githubusercontent.com/MOHAMED19OS/Download/main/Oscam_Ncam/installer.sh -qO -)"

    but after installation, oscam menu is unreachable in openWebIf


    root@axashistwinplus:~# /usr/bin/oscam -b -c /etc/tuxbox/config/

    Illegal instruction

    root@axashistwinplus:~# /usr/bin/oscam -b

    Illegal instruction

    Hi I live in spain and was pleased to see ITV is now transmitting on a European beam. Tuned in and managed to pick up the channels sound but no picture, I can now see its Tandberg encrypted. Is just a matter of time until the new Tandberg keys appear , then oscam and it will open ?


    Thanks in advance for any advice

    Edited once, last by dave007 ().

    • Official Post
    Quote from dave007

    Hi I live in spain and was pleased to see ITV is now transmitting on a European beam. Tuned in and managed to pick up the channels sound but no picture, I can now see its Tandberg encrypted. Is just a matter of time until the new Tandberg keys appear , then oscam and it will open ?


    Thanks in advance for any advice

    Doubt we will see the keys, its Tandberg but also AES 2 :thumbsdown:

    Quote from master G
    Quote from supwiddiss

    Code to start oscam in telnet?

    I gave it to you recently.

    Post
    RE: The LATEST OSCAM-EMU FOR VARIOUS PLATFORMS Discussion and Request Thread
    (Quote from supwiddiss)


    If the binary is in /usr/bin folder you would use this ~ /usr/bin/oscam -b
    master G

    Yes you did sir. I didn't respond if it worked.
    Here's what I get from your instructions and from a Google search.
    And yes. The binary is in /usr/bin. Permissions 755.
    As always. Thanks.


    login as: root

    root@192.168.5.205's password:

    root@osmio4k:~# cd /usr/bin

    root@osmio4k:/usr/bin# oscam -b

    -bash: /usr/bin/oscam: cannot execute binary file: Exec format error

    root@osmio4k:/usr/bin# ./oscam &

    [1] 1463

    root@osmio4k:/usr/bin# -bash: ./oscam: cannot execute binary file: Exec format error

    root@osmio4k:/usr/bin#

    Quote from .atari.
    Quote from supwiddiss

    oscam-EMU-CyCeC+11711-798-aarch64-ssl102

    Is not arm ! And Osmino not aarch64

    I tend to differ sir. As I was told in the past it is in fact that.
    From a fast Google search to verify:

    OSCam_svn1.20-rev-11491 -emu-r786


    audi06_19



    aarch64 processor:


    -Edision OS Mio 4k


    -Vu+Plus Duo4K



    Edit:
    With all respect. If you believe my receiver to not be aarch64. Past binaries for this platform have worked quite well.
    I have even used just Vu+ binaries.
    Which platform would you suggest and how would I verifiy it?

    I can use a translator if it would help.
    What is your native language?
    I use no cards. Just the pv, biss, etc emulators.
    Going by the changelog I see this.
    Even though ?? what fix ??? isn't exactly mentioned or what was broken that needed fixing in the first place.
    Jen's will love this one.

    Doesn't ANYONE consider posting a semi-detailed changelog?
    Nothing in this one mentions cards. If It did, I wouldn't be asking why an AARCH64 binary wont work when they always did in the past.
    Because I don't use any stinkin' cards.
    Thanks!



    [OSCam] /EMU -patched/CyCeC+/ # r11711 /mega8.1

    Cayman - Cameleon - C[WPK]onax


    # fix for PowerVu


    Thanks @ Jej@n from SAT-4-ALL forum

OSCam-EMU Support Forum

Configs, discussion, downloads and guides for OSCam-EMU Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login