mastic_man you said you disabled pip , is that on the box did you also turn off Preview Live streams in mini tv in xstreamity main settings.
Jedi Maker Xtream (IPTV Bouquet Creator) - Main thread
- KiddaC
- Thread is marked as Resolved.
-
-
comes in... says hello... comes back tomorrow.
Stick around pal, you might get things sorted :)
-
Had to reflash the box bud as had restored my back up image, log is on its way :)
-
mastic_man you said you disabled pip , is that on the box did you also turn off Preview Live streams in mini tv in xstreamity main settings.
The minute you open the plugin a tiny mirror image of the screen appears in the top left hand corner and the main screen then becomes non responsive. Pressing the pip button or any other button has any effect.The only way to get the screen back is by a full reboot unfortunately.
-
I remember seeing this issue, but it was a long time ago but i cant remember the fix for it. :derpthink:
It was with most plugins, not just one.....
Are both boxes used on the same TV ?
Try set the resolution from the venton to 1080p (not auto) and make sure your TV setting for the picture are also 1080 and not 4k or Auto.
Failing that see if you have an issue using other firmware, as you said yourself it used to work fine on older builds.
-
Can we add bouquet name to the bouquets?
Similar as ABM does for channel selection screen?
I think this is how ABM adds it
#SERVICE 1:64:0:0:0:0:0:0:0:0:
#DESCRIPTION Bouquet name
-
“Can we add bouquet name to the bouquets?
Similar as ABM does for channel selection screen?
I think this is how ABM adds it
#SERVICE 1:64:0:0:0:0:0:0:0:0:
#DESCRIPTION Bouquet name “
That would be great.
At this moment in the playlist.txt are 4 lines.
Still isn’t intuitive how to create own bouquets ..
-
"I remember seeing this issue, but it was a long time ago but i cant remember the fix for it. :derpthink:
It was with most plugins, not just one.....
Are both boxes used on the same TV ?
Try set the resolution from the venton to 1080p (not auto) and make sure your TV setting for the picture are also 1080 and not 4k or Auto.
Failing that see if you have an issue using other firmware, as you said yourself it used to work fine on older builds."
I Have tried 2 x different TVs with images I have just downloaded from the nighties going back to 6.1 and get the same results so its looking like its either the presently available firmware of which I cant set higher than 1080i or something to do with the HDMi on both the older the TVs.
Going to try a newer TV later and see if I can get the resolution any higher.
-
-
prob the wrong thread but il chance my arm. my provider only uses xtream tv plugin (mac enabled, i have no line details etc)
the best i an get at the minute is using the xtream plugin to create live and vod boquets. i can get epg data to attach to these channels.
question is, is it possible to use a plugin to "clone" these channels into the normal boquets? i can add the channel to boquets manually but epg data doesnt attach to it then.
-
-
is there a way to find the portal from the box?
the one he uses for firesticks etc doesnt work 'remote name cant be solved'
-
for mac to m3u you need your domain then add /c/
i.e
http://domain.xyz:8080/c/
if you can get a username and password from mac to m3u
then your line is
domain.xyz:8080/get.php?username=user&password=pass&type=m3u&output=ts
-
im struggling to find my domain.
-
erm... i never used xtreamtv plugin. (so i don't know where it hides these details)
Do you know how to use openwebif.
i.e typing your sat boxes ip address into a windows browser.
for example
192.168.1.110
Play a channel with xtreamtv
then open openwebif in a browser,
go to television tab on the left
then current tab at the top.
The info there, should tell you the address of the stream being played, and from there you might be able to get you domain,port, username and password
-
erm... i never used xtreamtv plugin. (so i don't know where it hides these details)
Do you know how to use openwebif.
i.e typing your sat boxes ip address into a windows browser.
for example
192.168.1.110
Play a channel with xtreamtv
then open openwebif in a browser,
go to television tab on the left
then current tab at the top.
The info there, should tell you the address of the stream being played, and from there you might be able to get you domain and port
THINK THAT GOT ME A BIT FURTHER BUT STILL NO DICE. CANT GET THE MAC TO M3U TO GENERATE ANYTHING
-
-
I tried in openwebif iptv streams seem to have trouble playing from small screen on top left hand corner but if you go to current on openwebif and scroll down you will get relevant info.
-
-
The above post is just a quote ??
Apologies, I was in the middle of a post last night when my father in law fell and got taken into hospital , I have partially posted by mistake :(
KiddaC Skins and Plugins
KiddaC Enigma2 Picons, Plugins and Skins, includes slyk-1-HD, v-skin-HD, slyk-q-HD, slyk onyx skins, Bouquet Maker Xtream, E2Piconizer, IPTV Bouquet Maker, Jedi Maker Xtream, Jedi EPG Xtream, ScreenNames, Visual Weather and X Class, X-Streamity - Xtream Codes IPTV Player.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!