E2m3u2bouquet - discussion & support

There are 1,612 replies in this Thread which was already clicked 251,443 times. The last Post () by hajosch.

    Quote from pepsik

    Yes + if you have made any changes in the "Configuration" menu of plugin and saved them - the next wakeup time will be changed

    Yes I saw this. I tested the start at boot to yes, everything is working fine without box hang. Your plugin is near to the perfection !!! Thanks

    Octagon SF8008 IPTV / DVB-S2X / DVB-C / T2

    OpenATV multiboot 7.5.1 / 7.6

    pepsik, it seems there is a problem with the execution by interval. Manually everything was ok as said before. But automatic schedule does nothing. I found only in the log the following for the 22h41 planned execution. And in the status, I have "Bouquet last update - 06/01/22 20:40:29". This one was a run after a boot to test the execution.


    I'm not lucky !

    Code
    22:41:10.0141 [06.01 22:41:10] [e2m3u2b] Start updating bouquets on a schedule
22:41:10.0166 [06.01 22:41:10] [e2m3u2b] Next wake up time: 07/01/22 00:41:10

    e2m3u2bouquet.log

    Octagon SF8008 IPTV / DVB-S2X / DVB-C / T2

    OpenATV multiboot 7.5.1 / 7.6

    Edited once, last by jeepcook: add log ().

    Quote from jeepcook

    But automatic schedule does nothing.

    Incomprehensible situation. The piece of code responsible for the auto-update time is one for "fixed time" and for "interval". It simply "on exit" returns a timer with a specified time. And if there is an error, then it is clearly not related to the timer.


    1) What is the update interval set in the settings?

    2) Edit /Plugins/Extension/E2m3u2bouquet/config.py setting debuglevel to DEBUG instead of INFO. RestartGUI.

    And then send me a log in private messages so as not to "litter" the forum thread


    p.s. I will now turn on updates every two hours for the test. And in the evening I will see the result in the logs... SATBox will not be available to me until the evening. So in the evening, everything will "clear up".... At the same time, I will compare the result with your logs

    if you like it you can make donations

    Hello,

    So this morning:


    My config:

    9fe877df9b36e528dc.jpg


    Restart gui, process was ok, sent you the log in pm and I will send you at the next autostart update.

    Octagon SF8008 IPTV / DVB-S2X / DVB-C / T2

    OpenATV multiboot 7.5.1 / 7.6

    Like 1
    Quote from pepsik

    Ok .... will be fixed in the evening :thank_you2: ... FIXED .... Will be updated in the evening .... Now I'm just leaving until the evening

    E2m3u2bouquet Plugin - RE-download, --force-reinstall, ENJOY!

    Thanks, Just see your modded post. So update done, now have to wait 2 hours for the next schedule bouquet update. and verify!:rasta2bigsmoke0gf1:


    EDIT:


    Confirm that fix is OK! the schedule scan process is fully ok !


    Great job pepsik ! thanks

    Octagon SF8008 IPTV / DVB-S2X / DVB-C / T2

    OpenATV multiboot 7.5.1 / 7.6

    Edited 3 times, last by jeepcook: add informations ().

    Like 3
    Quote from pepsik

    Has perfection been achieved or are there more wishes?

    Yes everything is perfect and stable!! Will just see if I still have random crashes when the update is running. But we know this is not a problem from e2m3u2 plugin.


    Really great job, with the increasing amount of avod providers, your plugin is a central one for my configuration! If I think about new implementations, I'll speak about with you.


    Will offer you a beer ;-)

    Octagon SF8008 IPTV / DVB-S2X / DVB-C / T2

    OpenATV multiboot 7.5.1 / 7.6

    Edited once, last by jeepcook ().

    Quote from pepsik

    Judging by your playlists, you are from France or French-speaking? ... If you want you can translate the * .po file into French, and I will add it to the plugin

    ok, the reference po is uk one ? I found ru msgstr in. so where can I find the original file?


    thanks

    Octagon SF8008 IPTV / DVB-S2X / DVB-C / T2

    OpenATV multiboot 7.5.1 / 7.6

    pepsik , ok will check to deliver a french po.


    I had an idea of implementation. When the epgimport do its job, it doesn't take un account the "maintain old epg data for" parameter, in minutes (setup/epg/setup).


    So sometimes we have none epg on channels treated by e2m3u8 until next epg. I think this one shouldn't be empty if this parameter was taken in account. What do you think about this?


    Thanks

    Octagon SF8008 IPTV / DVB-S2X / DVB-C / T2

    OpenATV multiboot 7.5.1 / 7.6

    As you can see in the log, there is no error from e2m3u2 plugin. So the problem is not here but in the content of your xml and/or m3u, example channels in the m3u have no corresponding tvg-id in the epg xml.

    Octagon SF8008 IPTV / DVB-S2X / DVB-C / T2

    OpenATV multiboot 7.5.1 / 7.6

Get community help for all other Enigma2 plugins

This is your forum for support, questions, and guides for plugins not covered in our specialized sections. Support for uncategorized and miscellaneous Enigma2 plugins. Find help, troubleshooting, and discussions for plugins that don't fit other forum categories.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login