I've tried r7 and it boots and I can scan but the channels will not display when I zap.
Enigma2 for KI, KII & KIII
- mtahirghauri
- Thread is marked as Resolved.
There are 796 replies in this Thread which was already clicked 196,301 times. The last Post () by @hamid1387.
-
-
What kind of mecool box you have booted?
-
I've too booted on KIII pro but no live video only scan is ok and I have a list of unwatchable channels
-
I've tried r7 and it boots and I can scan but the channels will not display when I zap.
Which android software you have. And how installed openvision any video tutorials
-
it's like libreelec: burn the img file on sdcard and put it in your box after boot you must press power button for 6-8 seconds and wait it to boot enigma 2 you have to change thé skin to openpli FHD to have full screen
-
I failed to do it it's freez on MECOOL logo
-
that was m'y fault too: hold down power button while booting 6-8s and wait about 1mn the enigma2 welcome screen will appear.
-
Without pressing hidden reset button like libreelec ?
-
not needed juste hold power button and insert power supply after 6-8s release the button and wait boot screen
-
Freez on mecool logo. Which android software you use.
-
Excuse me I've forgot this:
After boot connect your KIII pro with PC using RJ45 and use Telnet program like Putty
- from Telnet type this:
cd /
chown root /etc/vsftpd.conf
reboot
- after restart you can connect FTP and transfer to /etc/init.d
aaa and amlsetfb scripts then change their attributes to "755" scripts are here :https://mega.nz/#!mhtVEaTR!GVD…lb-NhaxRy4C_ArL-RDn8Vd_SY
- then ... after a new restart you will have OSD on the screen
- do the "start wizard"
- change the skin to existing OpenPli FullHD
-
Freez on mecool logo. Which android software you use.
first experience with this Ota ROM KIII_PRO_AVL6862-NHG47L-20180908.182748.V0213
actually with KIII_PRO_v_6_1_Malaysk_20180728
I flash it with etcher and Rufus with different SDcard 2gb and 32gb
no success result
-
Freez on mecool logo. Which android software you use.
first experience with this Ota ROM KIII_PRO_AVL6862-NHG47L-20180908.182748.V0213
actually with KIII_PRO_v_6_1_Malaysk_20180728
I flash it with etcher and Rufus with different SDcard 2gb and 32gb
no success result
try with https://sourceforge.net/projects/win32diskimager/
and follow my last post
-
Excuse me I've forgot this:
After boot connect your KIII pro with PC using RJ45 and use Telnet program like Putty
- from Telnet type this:
cd /
chown root /etc/vsftpd.conf
reboot
- after restart you can connect FTP and transfer to /etc/init.d
aaa and amlsetfb scripts then change their attributes to "755" scripts are here :https://mega.nz/#!mhtVEaTR!GVD…lb-NhaxRy4C_ArL-RDn8Vd_SY
- then ... after a new restart you will have OSD on the screen
- do the "start wizard"
- change the skin to existing OpenPli FullHD
Files not downloading
-
How to use putty telnet. My ip 192.168.0.102
-
What kind of mecool box you have booted?
It is a Mecool K2 Pro (S905D)
-
I've too booted on KIII pro but no live video only scan is ok and I have a list of unwatchable channels
Same as me then.
I've tried r7 and it boots and I can scan but the channels will not display when I zap.
Which android software you have. And how installed openvision any video tutorials
Surely the android software is irrelevant as you are booting of the SD card? All I did was download the img file and burn to the SD car using Win32DiskImager then boot into the SD card. I have OpenElec setup on a different SD card already so the box defaults to the SD card on boot.
-
I've too booted on KIII pro but no live video only scan is ok and I have a list of unwatchable channels
Also it won't save the tuner configuration. Every time it boots it is disabled and I have to switch back to simple, if I try and select anything else I get the python green screen of death!
-
Freez on mecool logo. Which android software you use.
first experience with this Ota ROM KIII_PRO_AVL6862-NHG47L-20180908.182748.V0213
actually with KIII_PRO_v_6_1_Malaysk_20180728
I flash it with etcher and Rufus with different SDcard 2gb and 32gb
no success result
try with https://sourceforge.net/projects/win32diskimager/
and follow my last post
eventhough win32diskimager faild to boot, if you can write and share img of your SD maybe it will work this is my last chance :) until now
-
I'm using KIII pro image from here https://openvision.tech/stb-images/
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!