Quote from kiskaprince

It was automatic update from internet

i deal many mag 322 box everyday , all brand new in box i check each and every , with tv and internet , i never had single piece which did auto update by it self (unless you did activate your self ) right after boot , i always select either URL or use USB from recovery menu (in case of downgrade firmware)

my doubt is you might get clone box ...i hope i am wrong but here in north america i see chinese clone . here are many other experts than me may be they can firmly point out , all your syptoms i face many time , but i only deal with genuine mag 322 so never had any issue...

yes I went to update on the menu screen after boot and I choose url not usb and the box updated but after reboot only black screen since

It is original box but even if was a clone after reflashing it should work right?

are you selling Mag 256 w1 or w2?

Quote from kiskaprince

yes I went to update on the menu screen after boot and I choose url not usb and the box updated but after reboot only black screen since

It is original box but even if was a clone after reflashing it should work right?

are you selling Mag 256 w1 or w2?

you mentioned - AUTO UPDATE , which is different it never happend to me at all on any new box

if you go to software update than http is already there than you select URL bellow thats URL update ( thats what i do with brand new box)

if you plug USB and go to recovery menu and update thats USB update

clone box has its own url which doesn't support informir image , if they put genuine url and that image might crash your box

i mostly deal with MAG 322 W1 or 254W2 , (256w1 very limited)

Thanks

I am sending it back but I thought I could get it to work somehow

Quote from kiskaprince

Thanks

I am sending it back but I thought I could get it to work somehow

good luck , if he is genuine he will exchange , becasuse i had seen chinese clone here in Flea market , most issue with that box is blown the video chip , but personally i don't deal with that so i never had issue ,

Quote from neeljaviya

Quote from kiskaprince

Thanks

I am sending it back but I thought I could get it to work somehow

good luck , if he is genuine he will exchange , becasuse i had seen chinese clone here in Flea market , most issue with that box is blown the video chip , but personally i don't deal with that so i never had issue ,

am I right if the chip was blown will even see logo when booting?

hello to all

i can guess i own a genuine 322 box (i sent the sn number to infomir for control) i made the first update by internet imageupdate-infomir220-07r2-324

then i make Nepose upgrade by usb transitional + realease and now all is going ok i can also have ssh access (not with origina infomir)

i can read in the software update http menu : http://vps.magboxes.xyz//Mag322/latest/imageupdate

i wait Nepose info before trying as the last firmware is not still there

but i confirm until now all is working well even programmed recording

waiting for the next step

best regards

and good work Nepose !

Quote from kiskaprince

Quote from neeljaviya

Quote from kiskaprince

Thanks

I am sending it back but I thought I could get it to work somehow

good luck , if he is genuine he will exchange , becasuse i had seen chinese clone here in Flea market , most issue with that box is blown the video chip , but personally i don't deal with that so i never had issue ,

am I right if the chip was blown will even see logo when booting?

i have basic knowledge of electronics but not expert or high end circuit design , if i am correct infomir logo and bios data display are coming from 8bit Eprom , once all core hardware check it command to Display / graphic chip to change resolution according to setting , that seems not working , thats what i believe,

Quote from mondouble

hello to all

i can guess i own a genuine 322 box (i sent the sn number to infomir for control) i made the first update by internet imageupdate-infomir220-07r2-324

then i make Nepose upgrade by usb transitional + realease and now all is going ok i can also have ssh access (not with origina infomir)

i can read in the software update http menu : http://vps.magboxes.xyz//Mag322/latest/imageupdate

i wait Nepose info before trying as the last firmware is not still there

but i confirm until now all is working well even programmed recording

waiting for the next step

best regards

and good work Nepose !

Display More

i also update nepose 's custom image , it works well for me too, but few parameter i didn't check as well think on this because infomir doesn't have

you mentioned here "programmed recording" you mean PVR ? are you using stalker middlewere or M3U files with embaded portal ??

here in north america we use only stalker middleware , if you are also using stalker , how to set up this recording set up ? and is it accept local time ? as channels are all over the world from different time zone . thanks

hello neeljaviya to be more accurate -- i used stalker middle ware but i took care to obtain for the channels i needed to extract the same m3u files because it is very easy to create your own directories and even sub directories in the inner portal.

the best way to have a large m3u file on your computer and extract and transfer the ones you need to inner directories..

it was my choice and i benefits of the 2 worlds..

If you put the good reference in the NPT server you are just and only tied to your local time reference

for pvr you access by f1 to the menu ( in inner portal ) and you can in your local time program beginning and end of the channel you want record..immediatly or some hours later... But keep in mind that your box need to be made in sleeping mode before the recording began...

the box cannot receive 2 channels > you look at... or you record.. not both

look if you can use xstream editor with your provider

i hope it can help

best regards

thank you for brief explain , really appriciated !!

here in north america we have feed from all over the world , same channels comes from USA / Australia / UK /Europe etc.

as well provider often give just url to put in portal URL thats all , other end they use same M3u but they don't give source,

so its not possible to categorise directory as you mentiend , but its good to know your discriptive explanation clear many things for me.

thanks again ,

Quote from neeljaviya

Quote from kiskaprince

Thanks

I am sending it back but I thought I could get it to work somehow

good luck , if he is genuine he will exchange , becasuse i had seen chinese clone here in Flea market , most issue with that box is blown the video chip , but personally i don't deal with that so i never had issue ,

am I right if the chip was blown will even see logo when booting?

Thank you

hello i need more info please ..

in my mag 322 device info you can find 2.19.01-release

when i go to https://firmware.magboxes.xyz i only find (for 322 series)

• imageupdate_2.19.01-transitional-

and no " release " version is this normal ?

best regard

Also one nice news friends :) Public FTP server is available: ftp://firmware.magboxes.xyz:2121

I get read error after a couple of minutes, any idea what the problem is cheers.

sorry nepose trying to go

Unauthorized

This server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials (e.g., bad password), or your browser doesn't understand how to supply the credentials required.

its allways what i find