hello
i have mag254w1, i have download the mag254. flash is not work in on bootloader Upgrade Tools.
can you pls help.
b.r
save1988
There are 225 replies in this Thread which was already clicked 93,927 times. The last Post () by Riyad12345gy.
hello
i have mag254w1, i have download the mag254. flash is not work in on bootloader Upgrade Tools.
can you pls help.
b.r
save1988
hello,
I'm very interested on your custom version.
Do you improved the record function ? As far as i know it 's buggy on the original firmware from infomir, subject to error and sudden iptv recording interrupt...Also timer function frequently doesn't achieve entirely it's task (recording stop before end time).
Thanks in advance.
can you already say something, if and when an update for the Mag 322 comes? :)
Hi friends :)
Display Morehello
i have mag254w1, i have download the mag254. flash is not work in on bootloader Upgrade Tools.
can you pls help.
b.r
save1988
Did you download version 2.19.02-rc.1? This is current transitional image and this must be used by everyone who wants to flash my firmware for first time.
What shows when you try to install?
Display Morehello,
I'm very interested on your custom version.
Do you improved the record function ? As far as i know it 's buggy on the original firmware from infomir, subject to error and sudden iptv recording interrupt...Also timer function frequently doesn't achieve entirely it's task (recording stop before end time).
Thanks in advance.
Unfortunately I haven't touched this, if you could describe it please more specificly and write which STBs are corrupted.
can you already say something, if and when an update for the Mag 322 comes? :)
There is now available upgrade 2.19.02-rc.2. This is only for MAG 322/324 and Aura HD Pro STBs. It unlocks possibility to set 1920x1080 resolution in embedded portal settings.
This upgrade is a release image, which means that you firstly have to install transitional image if you didn't do it before. Then go to embedded portal settings -> Software upgrade and try check for updates.
Remember please that the 2.19.02-rc.2 cannot be installed on STBs other than 322/324/Aura HD Pro, violating it will result unsupported architecture error.
thx
i will install today
Hmmm
No Update :(
or am I doing something wrong? :(
hello Macabros
i try the same way and get the same result after writting the firmware address in http menu - i also tried by usb method in the sama way ii used before with success for rc1 transitional and got wrong signature ..
so i stay on rc1 waiting for new compilation..because i was never blocked and new developments can wait!
regards
Hi, Does anyone have a factory image or clone image for Mag 250 clones? The software version should be 218 r12 or 218 r14 and can not be updated to the new version.
Thanks for your reply. I need a software for the clone mag 250, where it will not be able to upgrade to a new version, because the new versions of the software are killing the Mag 250 devices, which is because of the clones of devices that are bad mac addresses.
Display MoreDisplay Moresorry for late reply,been smothering with a bloody flu.
i gave him the details so not sure why he delayed getting onto the forum.
maybe he just dont want to,i know he is up to his eye,s doing other things.
im very suprised there is not more info on the patch.i myself was giving a link to the guy who initially developed the patch but he since removed his post but all the replys are still there and i think he replies to some questions about the subject.
hope link below helps guys.
https://www.reddit.com/r/IPTV/…utm_source=reddit-android
i had forgotten i saved the link to my desktop....:fingers crossed:
Thanks for link, for other interested people there is an instruction how to do patch on your STB in a quick and dirty way (taken from link):
1. Disable autoupdates because they might restore lock. Do it before you take the box online (the best option is to disable temporarily any Internet connection and enable it when ending guide, leave only local network to use SSH)
2. Check if you have access by SSH, if no, than flash public Infomir image from soft.infomir.com which has enabled connection by default.
3. Enter SSH and do following commands:
Codeecho 127.0.0.1 mag256.dcbs.infomir.com >> /etc/hosts rm /mnt/Userfs/data/dls.backup reboot && exit
It will deny requests to Infomir database of blocked portals, replace mag256 with the model you have (e.g. mag254). The "dcbs.infomir.com" contains this database and prefix with STB model gets request of and redirects to particular table for each device. The "dls.backup" may contain offline cache with list of already blocked portals or some instructions for this mechanism so we have to remove it in case.
4. After rebooting wait some time and reconnect STB to Internet to check.
Wysłane z mojego LG-M250 przy użyciu Tapatalka
Please read it'll work with Chinese mag250
Okay, I read it. I need a clean software imageupdate r12 or r14 that does not have the ability to upgrade to a new version.
Awesome work, thank you so much! I'm currently running 2.19.01-transitional on my mag 322 and it works amazing. When I try to upgrade to 2.19.02-rc.2 i get an "invalid architecture" error. So I was wondering if I'm doing the upgrades correctly and in the right order?
1. Flash the 2.19.01-transitional from the bootloader menu (I did not do 2.19.02-rc1 as there was no specific mag322 file)
2. Flash 2.19.02.rc2 from the Portal
Since 2.19.02-rc1 is the latest transitional image and there is no file for mag322 am I correct in assuming mag324 is the correct transitional image for mag322 as well?
Awesome work, thank you so much! I'm currently running 2.19.01-transitional on my mag 322 and it works amazing. When I try to upgrade to 2.19.02-rc.2 i get an "invalid architecture" error. So I was wondering if I'm doing the upgrades correctly and in the right order?
1. Flash the 2.19.01-transitional from the bootloader menu (I did not do 2.19.02-rc1 as there was no specific mag322 file)2. Flash 2.19.02.rc2 from the Portal
Since 2.19.02-rc1 is the latest transitional image and there is no file for mag322 am I correct in assuming mag324 is the correct transitional image for mag322 as well?
in the portal the url probably not ...
https://vps.magboxes.xyz/imageupdates/2.19.02-rc.2/
can you try that?
Im currently on 2.19.01-transitional and it won’t let me upgrade my mag322 to 2.19.02-rc.2 via http.
Is there. 2.19.02-RC.1 for mag322?
What about dts support ?
With older original firmwares from infomir, it's present but they cut it out with later firmwares.
Should be great if DTS support can be put back in this custom firmware.
In all these firmware updates trying to get 2.19.02-rc2 working on my Mag322 I thought I bricked my mag but the logo was just corrupted so I had to make a new logo.
Figured I'd make one that looked almost stock but gave credit to NEPOSE for the amazing work on the firmware images. I still can't get anything but 2.19.01-transitional working but it's miles better than the firmware images infomir is putting out these days.
Nickjallday i am in the same config you are on :2.19.01-transitional is the only firmware i can use other transitional buggy for me and final rc2 does not accept wrong signature..
i hope Nepose will sort a rc3 that we can directly load from 2.19.01-transitional
regards
Don’t have an account yet? Register yourself now and be a part of our community!