in openaatv 6.4 menu \ setup \ system \ network \ device Setup \ Lan Connection \ Network MAC Settings.
stalker portal on enigma2
- jokosat
- Thread is marked as Resolved.
-
-
in openaatv 6.4 menu \ setup \ system \ network \ device Setup \ Lan Connection \ Network MAC Settings.
I use WLAN connection
-
In any PurE2 it does change the MAC address...
-
Mind, WLAN device has its own MAC...
But why would one want to change it?
-
in openaatv 6.4 menu \ setup \ system \ network \ device Setup \ Lan Connection \ Network MAC Settings.
Mind, WLAN device has its own MAC...
But why would one want to change it?
Thanks for your help, now works

-
Can you answer my Q, please? Why?
-
Because some IPTV provider force you to use mag devices and mac address. So then if you change the mac address of your other devices
like your Enigma2 STB you can use stalker and other mag emulator plugins to watch IPTV from thoose providers.
Me personal think this is crapp. If i am forced to use something, then bye bye lets go to next provider.
Who wants to drive a Trabant ;)
-
Indeed - I wouldn't pay for those services to begin with but OK, there are people living in different situations, whereby they can't or don't want to fight for their right to have a dish, so...
On the other hand, if those "IPTV providers" are forcing one to have a specific device - it's just crass to go with them, as there are various "providers" of any service!
Then, some machines, like Zgemma H7, have MAG emulators (Stalker) with Ministra support, so one should write to the manufacturer to include that in their Stalker bin (because they differ from one machine to the other).
But even so, one can change STB MAC address easily, as I wrote in detail in this very thread... And if these IPTV providers do not know about it, that should tell you what kind of "service" that is...
Most of these guys, let's be honest, are nothing but mediators or "re-sellers" and they actually don't know jack $h&t about anything. I remember one asking me to help him set up, since he doesn't know anything about it - but he is going "into business big time"... rubbing his nasty little hands, going "Money, money, money!!!" And you lot buying such "services" are enabling them to do that!!! FFS!!!!
Instead of conclusion: in the EU it is your INALIENABLE HUMAN RIGHT to have a dish and digital services of any kind you need! The state must provide that right to all its citizens and stop discrimination by landlords etc.
We still have loadsa stuff via CS, so use that and forget about IPTV, which is mostly crap and illegal anyway, so no guarantees are valid from such providers...
But if people are lazy and/or stupid - there will be such "providers" and they will thrive, I have no illusions about that. Which is why I am not a puritan. I am only talking in my own name! Personally, I would not do that!
-
Well i also forgot to meantion that some legal IPTV distrubed by fiber here in Scandinavia, maybe other parts of the Europe.
Can be watched with devices other then the one provided by CanalDigital, ComHem, Telia, Altibox and so on.
They use mac address and subscription card in their devices.
So with an enigma2 device,CI+module, Stalker and correct mac address you can use any device supporting this criteria.
-
gorski some providers only allow one mac address per account so if you want to use other mac based device you need to change MAC especially if you Have a Magbox and you have registered that Mac address with the provider.
So if I want to use stalker portal on enigma2 or even stb emulator on android I need to change to my Magbox Macc address.
Yes you can contact provider and get them to change mac but i think they would get fed up if changing back and forth.
-
-
Yes, it's what we know as "cheating", innit...:rasta2bigsmoke0gf1: Everybody doing the dance...


-
Wouldn't class it as cheating you can still only use one device at a time even if you have paid for multiroom still tied to one mac device.
-
Ah, that's crass... Paying for multiroom and it must be the same MAC address? Swell...
-
Ah, that's crass... Paying for multiroom and it must be the same MAC address? Swell...
Yes ,crapp because it is still one account and only one mac to one account. In fact the provider I have multiroom with (extra 2 connections) does not even allow MAC based i,e, stbemu or magbox I would need to buy another account for that alone.
Where as my other provider I can use any apps and one mac.
-
Just wanted to install stalker
I have Zgemma h9s with Pure2 6.5 with latest updates. Installed stalker-qt from the feed and cannot see stalker in the plugins. Is any additional plugin or files needed?
-
Just wanted to install stalker
I have Zgemma h9s with Pure2 6.5 with latest updates. Installed stalker-qt from the feed and cannot see stalker in the plugins. Is any additional plugin or files needed?
I just tried installing it from plugins on openatv it is there did you reboot gui.
-
I just tried installing it from plugins on openatv it is there did you reboot gui.
Of course I did, both GUI and box.
The funniest thing is I've seen how stalker-qt was installing, when I'm going to installed plugins stalker is not there. When I try to reinstall this plugin again because it's still listed in plugins to install it takes literally 1s comparing to 30s of first install. I have tries to install also local ipk with the same result. Stalker-qt is not present in installed plugins.
-
OK, first try to uninstall it, using the Plugins > red button > extensions > OK to delete and confirm.
Reboot the box. Try installing it again from the Plugins > extensions, please. Reboot.
If if doesn't install, then there is a bug and we should report it to the coders.
To do that effectively FIRST, before all that, you need to activate LOGS, please - see my thread in the PurE2 section's Stickies for "how to".
Good luck!
-
OK, first try to uninstall it, using the Plugins > red button > extensions > OK to delete and confirm.
Reboot the box. Try installing it again from the Plugins > extensions, please. Reboot.
If if doesn't install, then there is a bug and we should report it to the coders.
To do that effectively FIRST, before all that, you need to activate LOGS, please - see my thread in the PurE2 section's Stickies for "how to".
Good luck!No chance to uninstall. Stalker-qt don't show up there. I have checked Openwebif and plugin is there
I have tried to uninstall and package is not available
When I'm trying to install stalker again from menu I see console just for second and nothing is happening.
Pure2 was a fresh install v6.5 only few days ago.
I attach my logs
I any telnet command to uninstall this package?
Thanks for help
-
Display More
** For OE-Alliance builds only **
Find attached an amended plugin.py file that will allow you to define the individual MAC addresses to be used in your portal URLs.This enables you to easily change the mac address to anything you want, rather than just being your boxes set hardware MAC address.
Please note this is based on the oe-alliance version of qtstalker-v5 as can be found here.
https://github.com/oe-alliance/e2plugins
How to use my amend
Install the stalker qt IPK as normal (i.e. from oe-alliance plugin extensions feeds)
Navigate to
/usr/lib/enigma2/python/Plugins/Extensions/Stalker/Backup the original plugin.py (you have been warned)
Copy attached plugin.py over to this folder.reboot GUI
My testing has been done with a config file. So create a new file on your external media device called portal.stalkerconfig
/media/hddor
/media/usb
edit this file by putting your URL addresses in it in the following format.
The new bit is the ?mac=
Codeportal 0 http://domain1.xyz:7777/c/?mac=00:1A:79:00:BB:7C portal 1 http://domain2.xyz:8080/c/?mac=00:1A:79:00:00:A7save/upload config file back to your media device
Go into stalker setup.
Menu > Plugins > stalker setup
If you have used a config file, the blue button should now say "load settings" and display your current MAC address
(this will still work with manual entry, config file is quicker and easier though)Press blue button to load your new config file. Click save.
Select the Portal you wish to use by pressing OK on it.
If the MAC address in the config file is different than the current MAC address, the MAC address of your box will be changed.
You can then go into Stalker (main menu or in extensions) and play this portal.Enjoy
:cool1: :thumbup:
When I replace the original plugin.py with your plugin.py and restart the GUI, the receiver (Octagon SF8008 using openvix) keeping rebooting. It will be nice if I can get this to work.
-
Your hub for IPTV & streaming support.
Get help with Android apps, Smart TV setup, m3u playlists, channel lists, and finding reliable live streaming websites. Master IPTV streaming on all devices. Find downloads, setup tutorials, and community support for apps, Smart TVs, and m3u channel lists.
