stalker portal on enigma2

There are 473 replies in this Thread which was already clicked 175,111 times. The last Post () by biko.

    English is not the language used by default on the forum ?????

    Hello everyone, stalker tested on octagon sf8008mini with the latest Satdreamgr 8 image and it works well by putting the version of Ziko that I still thank in passing .... I have an Axas device which is coming in the next few days to test with another environment, I will of course keep you informed of the results....

    Edited once, last by kashmir ().

    Like 1

    Hello everyone, Stalker ok with Openpli 7.3 on my Octagon sf8008mini ..... all the Ziko files must be installed as said before and the Stalkerconfig.xml file must also and above all be installed in / etc and it works without problem. ....good news.....

    on the other hand, it takes longer to open than with other images, but it works .....


    Quote from kashmir

    Hello everyone, Stalker ok with Openpli 7.3 on my Octagon sf8008mini ..... all the Ziko files must be installed as said before and the Stalkerconfig.xml file must also and above all be installed in / etc and it works without problem. ....good news.....

    on the other hand, it takes longer to open than with other images, but it works .....


    from where download files with config, how to to install nothhing found first, all working information on first page

    But I think the device used is important, because here I just received an Axas twin for testing and a priori, Stalker does not work, I will see the rest ... good luck ...

    Quote from kashmir

    Hi friend, the version of Ziko is in my post n ° 300 and the config file to put in etc attribute 644 is in here .....

    Did stalker zigo.rar in your post 300(stalker portal on enigma2)

    and stalkerconfig.xml post above in post 388(stalker portal on enigma2)


    works at vu+ openpli 8.0 ?????


    second question

    if this stalker zigo.rar didn't work at vu+ openpli 8.0, any other stalker which works at vu+ openpli 8.0 ?????

    Hi, when Stalker is in the plugins addons of your image, you first download it ..... then you change the 2 files plugin.py and stalker.py by those from post 300 which are supposed to be in / usr / lib / enigma2 / python / plugin / extension and Stalker with attribute 755, then you launch the stalker addons and you do blue button installation of stalker.conf that you installed before in / home with your host and mac addresses. ..then ok and you launch one and it should load between 5 and 20 seconds following the servers .... if it does not start, change the file located

    / usr / bin by that of Ziko post 300 and same method after restarting the receiver .... and for the openpli 8 question I did not test Staker with it, it's up to you to test ....

    Edited 2 times, last by kashmir ().

    Like 3

    Hello, yes of course, the data must be in the file named stalker.conf which is in home with DCC in this form ....

    portal 0 http: // ip address: 8000 / c /? mac = 00: 1A: 55: 5e: 1A: 00

    portal 1 http: // ip address: 8000 / c /? mac = 00: 1A: 55: 5e: 1A: 00

    portal 2 http: // ip address: 8000 / c /? mac = 00: 1A: 55: 5e: 1A: 00

    portal 3 http: // ip address: 8000 / c /? mac = 00: 1A: 55: 5e: 1A: 00

    ........................................

    portal 13

    Edited once, last by kashmir ().

    Like 2 Thanks 1

    @johnnylarue167

    @kashmir

    and @ all

    Could someone write me short tutorial, step by step, how to make STALKER player to work on VU+SOLO4k - Open BH image, with all neccessary file ?

    BIG thanks in advance !

    I read all pages, especially post from 16 and 17 pages (294 post and above) but it confused me...

    I have not stalker from feeds now ( I installed it before when I tried what written colleagues kashmir and johnnylarue167) but after I deleted it mannually it dissapears from feed. I hope that some of colleagues will help me as soon as possible.


    p.s. I also can not find properly stalker portal for Solo 4k, here is https://www.vuplus4k.com/plugin-stalker/ but download link is empty.

    Edited 3 times, last by perob ().

    Hi friend, if you have any difficulties with this version of Stalker, I will give you only one advice, turn to the new plukin Stalker from friend Ziko whom I thank in passing for his excellent work .... ..

    Multi-Stalker plugin Beta:wink:

    Dear friend @kashmir


    Thank for propose, but I am not looking for other (beta) plugin.

    I want to make to work classic STALKER portal (as it is on mag), so please, if it is not problem, give me here step by step explaination how to do it.


    1. I follow what is written from 294 post and what You written. It is different thing. First in #294 is not clear, need we to put all files from uploaded stalker.rar in our plugin from feed - /usr/lib/e2....stalkerclient because name of the folder is not same (stalker and stalkerclient) so because that, not overwrite .py files when we just put stalker folder on the written path. Must we change MAC id, can we stay with our default mac id ?

    Also when all finish, HOW TO START stalker player with graphic know interface, like in post #296 ???


    2 . On Your tutorial is different situtation. We delete stalkerclient plugin (installed from feeds) before put files from "stalker ziko.rar" ?

    Also, here, different from plugin in #287/294 where we have NOT binary file and files to /usr/lib/share, we have that all...

    I installed it but got just ziko configuration plugin, when put true portal in stalker.config and save it, HOW TO START stalker graphic interface, like it is in post #296 and known from the mag...


    Am I waiting for step by step precise instructions and thanks in advance for it !

    Edited once, last by perob ().

Your hub for IPTV & streaming support.

Get help with Android apps, Smart TV setup, m3u playlists, channel lists, and finding reliable live streaming websites. Master IPTV streaming on all devices. Find downloads, setup tutorials, and community support for apps, Smart TVs, and m3u channel lists.