oscam-git11778-801@cccc22ab-openpli40-webif-dvbapi-libusb-emu
oscam-git11778-801@cccc22ab-hd51-webif-dvbapi-emu
oscam-git11778-801@cccc22ab-solo4k-webif-dvbapi-libusb-emu
thanks Rennys
Oscam Mipsel & Arm
-
- ARM & MIPS
- W@Rp
- Thread is marked as Resolved.
-
-
what is the last version of oscam which work on vu duo (bh v 3.1.0)?
-
oscam-git11780-801@77374920-solo4k-webif-dvbapi-libusb-emu
oscam-git11780-801@77374920-hd51-webif-dvbapi-emu
oscam-git11780-801@77374920-openpli40-webif-dvbapi-libusb-emu
thanks Rennys
-
11781-f94057c2
09.05.2024
Fix for tiers start date and expire date on 09C7, 098E, and 09EF. Thanks to Bust3D and TV-Gamer for testing.
thanks ohmza
-
oscam-git11781-801@f94057c2-solo4k-webif-dvbapi-libusb-emu
oscam-git11781-801@f94057c2-openpli40-webif-dvbapi-libusb-emu
oscam-git11780-801@77374920-hd51-webif-dvbapi-emu
thanks Rennys
-
oscam-git11782-801@1346db01-solo4k-webif-dvbapi-libusb-emu
oscam-git11782-801@1346db01-hd51-webif-dvbapi-emu
oscam-git11782-801@1346db01-openpli40-webif-dvbapi-libusb-emu
thanks Rennys -
oscam-git11783-801@c57bd7b4-solo4k-webif-dvbapi-libusb-emu
oscam-git11783-801@c57bd7b4-hd51-webif-dvbapi-emu
oscam-git11783-801@c57bd7b4-openpli40-webif-dvbapi-libusb-emu
thanks Rennys
-
oscam-git11784-801@3fe0194c-solo4k-webif-dvbapi-libusb-emu
oscam-git11784-801@3fe0194c-hd51-webif-dvbapi-emu
oscam-git11784-801@3fe0194c-openpli40-webif-dvbapi-libusb-emu
thanks Rennys
-
Greetings, please tell me how this works, what should be installed for it to work, I have VU+ Zero 4k OS Blackhole 5.4, please help me, I'm not an expert, I don't know how to install ipk files, and I don't know if it's installed, copied or what to do to this file worked Thank you for your help and I hope someone will take a look and explain how to insert it into the receiver
-
Greetings, please tell me how this works, what should be installed for it to work, I have VU+ Zero 4k OS Blackhole 5.4, please help me, I'm not an expert, I don't know how to install ipk files, and I don't know if it's installed, copied or what to do to this file worked Thank you for your help and I hope someone will take a look and explain how to insert it into the receiver
To install an .ipk file, you need to have a good communication from your computer with Vu+0.
Then you need to have an software (DCC, filezila, etc), installed in your computer to transfer/install any files into your box.
-
Greetings, please tell me how this works, what should be installed for it to work, I have VU+ Zero 4k OS Blackhole 5.4, please help me, I'm not an expert, I don't know how to install ipk files, and I don't know if it's installed, copied or what to do to this file worked Thank you for your help and I hope someone will take a look and explain how to insert it into the receiver
To install an .ipk file, you need to have a good communication from your computer with Vu+0.
Then you need to have an software (DCC, filezila, etc), installed in your computer to transfer/install any files into your box.
Greetings, ok, I have everything, only I know how to install via an ipk file, but I don't know how to insert a file via ftp if it has a path and what to do with that file, but I still don't know because some files inserted in the bin don't work and I need those that work for my VU+ Zero 4k Thank you
-
Greetings, please tell me how this works, what should be installed for it to work, I have VU+ Zero 4k OS Blackhole 5.4, please help me, I'm not an expert, I don't know how to install ipk files, and I don't know if it's installed, copied or what to do to this file worked Thank you for your help and I hope someone will take a look and explain how to insert it into the receiver
To install an .ipk file, you need to have a good communication from your computer with Vu+0.
Then you need to have an software (DCC, filezila, etc), installed in your computer to transfer/install any files into your box.
Greetings, ok, I have everything, only I know how to install via an ipk file, but I don't know how to insert a file via ftp if it has a path and what to do with that file, but I still don't know because some files inserted in the bin don't work and I need those that work for my VU+ Zero 4k Thank you
Some files (eg: oscam), need to have attribute 755.
-
Pozdrav molim vas recite mi kako ovo radi sta treba da bude instalirano da bi radilo imam VU+ Zero 4k OS Blackhole 5.4 molim vas pomozite, nisam strucnjak, ne znam kako da instaliram ipk fajlove i Ne znam da li je instaliran, kopiran ili šta da radim da je ovaj fajl upalio Hvala na pomoći i nadam se da će neko pogledati i objasniti kako da ga ubacim u prijemnik
Da biste instalirali .ipk fajl, potrebno je da imate dobru komunikaciju sa računara sa Vu+0.
Zatim morate imati softver (DCC, filezila, itd.), instaliran na vašem računalu za prijenos/instaliranje svih datoteka u vašu kutiju.
Pozdrav ok, imam sve, samo znam da instaliram preko ipk fajla, ali ne znam kako da ubacim fajl preko ftp-a ako ima putanju i sta da radim sa tim fajlom, ali ipak ne znam ne znam jer neke datoteke umetnute u kantu ne rade i trebaju mi one koje rade za moj VU+ Zero 4k Hvala
Neki fajlovi (npr.: oscam) moraju imati atribut 755.
Ok, I know that too, but how to activate it when it is not an ipk file, when it is from a zip file and not an ipka file
-
If oscam file is already in the folder with attribute 755, then go in the menu of the box-setup-softcam manager:
you will see the name of the oscam with a little box in front of it.
press blue button, so oscam will always starts when you turn on the box. Then press green button for 1st time start.
you can see all the colored texts on the bottom of the screen.
-
Why don't you install oscam from Mohamed os via telnet. Oscam will be installed in those paths depending on your image and receiver. The only thing you will have to do is change the files in the oscam config in etc / tuxbox / config that will be added after installation. When everything is installed, restart the box. If you don't know how to install manually, ask me in private message to explain.
-
Why don't you install oscam from Mohamed os via telnet. Oscam will be installed in those paths depending on your image and receiver. The only thing you will have to do is change the files in the oscam config in etc / tuxbox / config that will be added after installation. When everything is installed, restart the box. If you don't know how to install manually, ask me in private message to explain.
Sorry, I don't accept this link for installation via telenet, my receiver is VU+ zero 4k OS Blachol 5.4
-
Sorry , I didn't know that link doesn't work. For install your oscam you need oscam arm architecture for your box.
-
Code
Display Morewget -qO- --no-check-certificate "https://gitlab.com/MOHAMED_OS/dz_store/-/raw/main/Cam_Emulator/online-setup" | bash -s <ARGUMENT> OR: curl -LJso- "https://gitlab.com/MOHAMED_OS/dz_store/-/raw/main/Cam_Emulator/online-setup" | bash -s <ARGUMENT> ARGUMENT: oscam ncam powercam gosatplus ultracam gosatplus-oscam gosatplus-ncam powercam-oscam powercam-ncam ultracam-oscam ultracam-ncam supcam-oscam supcam-ncam
-
Ok, it accepts my oscam 11783-r801, what should I do next to keep it and update it to the new Oscam 11784 without having to do the installation again and search for the new Oscam
-
Sorry , I didn't know that link doesn't work. For install your oscam you need oscam arm architecture for your box.
Ok, it accepts my oscam 11783-r801, what should I do next to keep it and update it to the new Oscam 11784 without having to do the installation again and search for the new Oscam
OSCam Support Forum
Configs, discussion, downloads and guides for OSCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!