On the channel selection screen on R19 1080 skin the video player in the top right is offset by about 1-2mm on my screen leaving a thin black bar to the left of the playing video.
Is there anyway to fix this as it is a little annoying :)
On the channel selection screen on R19 1080 skin the video player in the top right is offset by about 1-2mm on my screen leaving a thin black bar to the left of the playing video.
Is there anyway to fix this as it is a little annoying :)
Same problem I need a fix too
what did you do to stop the ??? On your box tried everything driving me mad
On some of my skins I hack around this by putting a mask over the tv, and slightly enlarging the MINI TV behind it. I cannot do this on slyk R19 1080 as its flush to the right edge.
The only way to prevent this bug, a bug that has been around for ever in enigma2 is to not adjust your tv screen offset via your sat box.
So you need to reset your screen offset in your satbox. You then hopefully have a setting on your TV picture settings instead. (not your sat box) Something like Fit to Screen / screen fit...
To reset your screen on openatv its
usage and gui > extended gui > osd position. (other boxes all have this option - its just finding where it lives in your menus)
with no doubt
Hello everyone, am using slyk1080r19 2.07 20190110
and it is the best skin ive seen in the enigma2 world so far
but i always wondered if there's anyway to add the server informations in the first infobar (specifically in this area)
if there is a way to do it i'll really appreciate telling me how to
ps:i am so noob in skin modif (litterally)
slyk1080r19 has lots of hidden goodies for you in the extras.xml file
ftp into your box.
navigate to
/usr/share/enigma2/slyk-1080-r19
edit the extras.xml
see this post for instructions on editting the extras.xml file
*UPDATED* Slyk 1080 R19 (Install - FAQs)
reboot your gui
Display Moreslyk1080r19 has lots of hidden goodies for you in the extras.xml file
ftp into your box.
navigate to
/usr/share/enigma2/slyk-1080-r19
edit the extras.xml
see this post for instructions on editting the extras.xml file
*UPDATED* Slyk 1080 R19 (Install - FAQs)
reboot your gui
Thank you so much KiddaC
i'll get back with the results once i finish :plannedsomethingevil:
Hello there. Ive probably overlooked the option but how can i move this solid grey line to the right?
Epg / settings / service width / 460 for me but I don't show the picons there
Epg / settings / service width / 460 for me but I don't show the picons there
Yeah the picons push everything along. I feel i may need to edit one of the xml files somewhere
just change the width as mentioned in the above settings until it fits.
There is no definite answer, as it depends whether you are showing the picons. And what size you showing the picons.
just change the width as mentioned in the above settings until it fits.
There is no definite answer, as it depends whether you are showing the picons. And what size you showing the picons.
The service width increases the width of the box. Im referring to the vertical grey line that comes runs down the screen. I need a wide service width but the grey line is fixed
That is a graphic.
\usr\share\enigma2\slyk-onyx-1080\epg\timeline-now.png
That is a graphic.
\usr\share\enigma2\slyk-onyx-1080\epg\timeline-now.png
Moved that file out but think you may have misunderstood. This whole thick line needs moving or somehow removing
Sorry for being a pain lol
Does anyone know if that can be moved or removed? Or what the graphic is called?
i will answer your question in detail later when i am on my computer
i will answer your question in detail later when i am on my computer
thankyou 😊
ok, so what you want to do is so much work it isn't worth the hassle.
Screens in enigma2 are not like responsive websites. Every single element in an enigma2 skin is absolutely positioned.
You cannot just move one element and then everything else magically moves accordingly.
To move the dividing line to allow more of your long channels names to be shown, you need to amend every single element on that page
You would have to move the divider
Resize the TV
Realign the date
Realign all the buttons
Resize the EPG
Move the description across
etc etc.
If you want to show picons in EPG ( I personally never understood peoples obsession with showing picons in EPG - they take up pointless space)
Then you have to work out the numbers for all the values
Press menu on your EPG
Select what you want shown in the EPG
Then you need to work out the maths for the shown elements.
That space in Onyx skin is 480 pixels.
If you have picons show at 100 pixels.
Then you need to amend the service width to 480 - 100 = 380
Editting the skin files to acheive what you want, is probably beyond the scope of a person that isn't an experienced skinner.
As all my files are template based. So amending 1 screen might effect many more screens.
Either don't show picons, or adjust your settings numbers, or use a different skin that has more room for long iptv titles.
They are your only real options. Or just use channel select screen to view epg (TV BUTTON or press down arrow on tv). Much more room to view whats on, on that screen.
Display More
ok, so what you want to do is so much work it isn't worth the hassle.
Screens in enigma2 are not like responsive websites. Every single element in an enigma2 skin is absolutely positioned.
You cannot just move one element and then everything else magically moves accordingly.
To move the dividing line to allow more of your long channels names to be shown, you need to amend every single element on that page
You would have to move the divider
Resize the TV
Realign the date
Realign all the buttons
Resize the EPG
Move the description across
etc etc.
If you want to show picons in EPG ( I personally never understood peoples obsession with showing picons in EPG - they take up pointless space)
Then you have to work out the numbers for all the values
Press menu on your EPG
Select what you want shown in the EPG
Then you need to work out the maths for the shown elements.
That space in Onyx skin is 480 pixels.
If you have picons show at 100 pixels.Then you need to amend the service width to 480 - 100 = 380
Editting the skin files to acheive what you want, is probably beyond the scope of a person that isn't an experienced skinner.
As all my files are template based. So amending 1 screen might effect many more screens.
Either don't show picons, or adjust your settings numbers, or use a different skin that has more room for long iptv titles.
They are your only real options. Or just use channel select screen to view epg (TV BUTTON or press down arrow on tv). Much more room to view whats on, on that screen.
Many thanks for explaining it in detail. Is there any way just to remove it all together or change the height so that it just covers the mini tv area. That way nothing else will need moving
/usr/share/enigma2/slyk-onyx-1080/o-epg.xml
<screen name="GraphicalEPGPIG"
delete the line
<panel name="divider1" />
Don’t have an account yet? Register yourself now and be a part of our community!