Hi guys,
Dont know if I have a smargo prob or I am not configing it right in Oacam server. Anyway I have twp smargos but only had one plugged in my powered hub and it is running firmware 1.4. Its working OK. Now I thought I would upgrade my second smargos firmware to 1.7 which I did successfully and plugged it in another port on my pwered hub. I then updated my oscam server file to look like this....
[reader]
label=sly_uk
description = smargo
protocol=SmartReader
device=001:005
caid=0963
boxid = xxxxxxxx
ecmwhitelist = 0963@000000:3E,4E,42,44,45,47,6A,6B,6F,62,68,69,7C ,7D,7E, 72,73,77,79,80,8B
detect=CD
group=1
emmcache=1,1,2
[reader]
label=sly_uk
description = smargo1
protocol=SmartReader
device=001:009
caid=0963
boxid = xxxxxxxx
ecmwhitelist = 0963@000000:3E,4E,42,44,45,47,6A,6B,6F,62,68,69,7C ,7D,7E, 72,73,77,79,80,8B
detect=CD
group=1
emmcache=1,1,2
I moved my sly card to the second reader (which oscam detects OK) but it says invalid card but gets an atr ok?? is there anything I need to change in my config as I just repeated everything as the first reader Smargo is setup as fixed freq and set to 6mhz. Just trying to see if I fooked the smargo on the firmware upgrade. cheers guys