How to flash a Mutant HD60 4K Android Enigma2 Receiver

**master G** · Apr 17th 2019

Quote

Flash a new Enigma2 image onto the Mutant HD60 4K from a USB stick.

Hannibal_Lecter · Mar 23rd 2025

Mutant HD60 Flash Instructions

1. Turn off the receiver using the power button on the back.

2. Unzip the image and copy the /hd60 folder and the "bootargs.bin" and "fastboot.bin" files to a formatted FAT32 USB flash drive.

In my experience, smaller USB flash drives work best, e.g., (1 GB to 4 GB).

3. Insert the USB flash drive into the USB port on the box.

4. Press and hold the (small, inconspicuous) "U-boot" button on the left side of the receiver, look picture

5. Turn on the receiver using the power button on the back.

6. When FLSH appears on the display, the flash process has begun. Release the button.

The process takes about 5 minutes, and the receiver will then restart.

The new image can now be configured as desired.

Firmware, images and support for all Mutant models.