Discussion of article How to flash a Mutant HD60 4K Android Enigma2 Receiver:
QuoteThis guide is intended to show how to add new Enigma2 Images to the Mutant HD60 4K PVR ready Android Linux Enigma2 H.265 HEVC Receiver UHD 2160p
How to flash a Mutant HD60 4K Android Enigma2 Receiver
-
- Article
- master G
- Thread is marked as Resolved.
There is 1 reply in this Thread which was already clicked 3,314 times. The last Post () by Hannibal_Lecter.
-
master G
Added the Label Article -
master G
Moved the thread from forum Mutant HD60 4K to forum Mutant - All Models. -
Mutant HD60 Flash Instructions
1. Turn off the receiver using the power button on the back.
2. Unzip the image and copy the /hd60 folder and the "bootargs.bin" and "fastboot.bin" files to a formatted FAT32 USB flash drive.
In my experience, smaller USB flash drives work best, e.g., (1 GB to 4 GB).
3. Insert the USB flash drive into the USB port on the box.
4. Press and hold the (small, inconspicuous) "U-boot" button on the left side of the receiver, look picture
5. Turn on the receiver using the power button on the back.
6. When FLSH appears on the display, the flash process has begun. Release the button.
The process takes about 5 minutes, and the receiver will then restart.
The new image can now be configured as desired.
Mutant - All Models
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
