Yep,same here???
SKY DE
- Aldiman
- Closed
- Thread is marked as Resolved.
-
-
so when will the new 517 be uploaded for the vu+ ultimo?
No configs included.
Hi pal once installed it shows as 11.491? cheers.
Your old oscam bin file might still be in operation, have a check in usr/bin and see if you now have 2 oscam binfiles..
I have not personally used this ipk as i dont need it so its just a theory.
-
so when will the new 517 be uploaded for the vu+ ultimo?
No configs included.
Hi pal once installed it shows as 11.491? cheers.
Your old oscam bin file might still be in operation, have a check in usr/bin and see if you now have 2 oscam binfiles..
I have not personally used this ipk as i dont need it so its just a theory.
hi i was using 11.507 and not 11.491 so i dont think thats the problem, i noticed enigma has since deleted the post containing the ipk.
-
Updated to Oscam 11517 not all clearing and those that do tend to freeze?
Not sure on my settings?
Tried adjusting but no real change?
-
Updated to Oscam 11517 not all clearing and those that do tend to freeze?
Not sure on my settings?
Tried adjusting but no real change?
In that case, most likely the reason of the freeze-downtime is on the side of your source-associate(s), where necessary adjustments should be made.
-
so when will the new 517 be uploaded for the vu+ ultimo?
No configs included.
Hey, this new file also shows as 11.491 r786. i dont understand what is happening. On install it does show that it is being upgraded to 517 but upon activating the cam it shows the latter, please advise,
-
I have contacted my provider and they are telling me that the freezing issue will be sorted in the next few days.
-
After a lot of researching and as sort of a beginner i have managed to get the channels back :thumbup:
Thanks also to enigma for the latest oscam upload.
-
so when will the new 517 be uploaded for the vu+ ultimo?
No configs included.
Hey, this new file also shows as 11.491 r786. i dont understand what is happening. On install it does show that it is being upgraded to 517 but upon activating the cam it shows the latter, please advise,
After a lot of researching and as sort of a beginner i have managed to get the channels back :thumbup:
Thanks also to enigma for the latest oscam upload.
Hi, I am owner ultimo 4k too. Could you explain how did you proceed to settle the matter?
here black hole 3.0.8
-
-
THanks to ian1095 I have managed to get the sky DE back and Dazn 2 but I have lost DAZN 1 somewhere in this process. Any Ideas?
-
The new mechanism had a bug, apparently, hence 2 OSCam EMUs (oscam_emu & oscamemu) were recommended, intentionally using the same config files, sometimes one works better than the other...
-
THanks to ian1095 I have managed to get the sky DE back and Dazn 2 but I have lost DAZN 1 somewhere in this process. Any Ideas?
I'm the opposite both dazn channels clear for me but i have lost sky one which was working yesterday and sky Atlantic hd and sky animation hd take ages to clear, but i do get some channels which i couldnt before so i am happy and grateful that most of them are there because as of yesterday i had none.
-
Below are my settings,can anyone see any errors Please?
Many thanks
Quote[reader]
label = CCcam
description =
enable = 1
protocol = cccam
device =
key =
user =
password =
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 5
cccam_reshare = 0
services =
lb_whitelist_services =
inactivitytimeout = 1
reconnecttimeout = 30
reconnectdelay = 60000
keepalive = 1
fallback = 1
fallback_percaid =
localcards =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
cacheex_allow_filter = 1
caid =
ecmnotfoundlimit = 0
ecmwhitelist =
ecmheaderwhitelist =
ident =
chid =
class =
aeskeys =
group = 1
emmcache = 0,1,0,0
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 100
lb_force_fallback = 0
savenano =
blocknano =
dropbadcws = 1
disablecrccws =
cccversion = 2.3.0
cccmaxhops = 1
cccmindown = 0
cccwantemu = 1
ccckeepalive = 1
cccreshare = -1
cccreconnect = 12000
audisabled = 1
auprovid =
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0
-
so when will the new 517 be uploaded for the vu+ ultimo?
No configs included.
Hey, this new file also shows as 11.491 r786. i dont understand what is happening. On install it does show that it is being upgraded to 517 but upon activating the cam it shows the latter, please advise,
After a lot of researching and as sort of a beginner i have managed to get the channels back :thumbup:
Thanks also to enigma for the latest oscam upload.
Hi, I am owner ultimo 4k too. Could you explain how did you proceed to settle the matter?
here black hole 3.0.8
hi me ti=o got uno 4k with vix image still not clearing
-
People have to try to understand that EVERYONE in your chain has to do this, starting with the Server that has the card and every single box (hop) before it gets to you.
If there's one box in the chain that hasn't added the fix, then every single box after that box will get black screens. Sadly its not just a matter of you applying the fix. ALL have to do so.
Ian. -
Good evening friends with my SKY DE already works well with me with Oscam 11517 super perfect
Lg sedutor
;f++){e=arguments[f];for(d>){var>;l++){var>?{done:!1,value:a[c++]}:{done:!0}}};_.ba=function(a){var> -
Incorrect.
All Sky DE is working here, you just need to use Oscam and set it up correctly.
It can be fixed if the card server (reader) disables the CWCRC check using
disablecrccws = 1
AND the clients use
disablecrccws_only_for = 098C:000000; 09C4:000000
for the SkyDE servers
Alternatively, both server and client could use
disablecrccws_only_for = 0E00:000000;0500:050F00;09C4:0000 00;098C:000000;098D:000000
in the [global] section of oscam.conf.
ALL "hops" must use these parameters otherwise the CRCs will be wrong in the hop that doesn't.In addition to adding
Code:
to the [global] section of oscam.conf, if any relevant readers have
dropbadcws = 1
then it should be changed to
dropbadcws = 0
otherwise this parameter can be ignored as the default setting is dropbadcws = 0.
The new full 64bit CWs are interpreted as "bad" as oscam is normally expecting 48bit CWs with two checksum bytes. This is why the CW CRC check must be skipped for these channels as oscam attempts to "correct" the values of these bytes.Other Emulators such as CCcam , Mgcamd and Newcamd are now dead though and wont work with Germany.
Furthermore, it looks like 11914H and 12032H transponders have just now also converted to using full 64bit CWs too. -
To ian1095...thanks man !!!
it worked for me. currently using oscam r11517, I edited the global configuration thru Webif "Config".
-
.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!