Thanks, it works, are short interruptions, Mutant HD51, OpenATV 6.3, Oscam 11517-795.
SKY DE
- Aldiman
- Closed
- Thread is marked as Resolved.
-
-
Regards, I use oscam11517 with these settings but Sky De does not want to shine. What's wrong?
oscam.server generated automatically by Streamboard OSCAM build-DreamOSat-1.20_svn SVN r11517-795
# Read more: http://www.streamboard.tv/svn/…/doc/txt/oscam.server.txt
[reader]
label = constant.cw
enable = 0
protocol = constcw
device = /etc/tuxbox/config/constant.cw
caid = 2600,0B00,0B02,0500,0963,06AD,0940
group = 2
[reader]
label = emulator
protocol = emu
device = emulator
disablecrccws_only_for = 0500:50F000;09C4:000000;098C:000000;098D:000000
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
[reader]
label = server1
protocol = cccam_mcs
device =
user =
password =
inactivitytimeout = 30
disablecrccws_only_for = 098C:000000;09C4:000000 This ?
group = 1
disablecrccws = 1 Or this ? and as you don't have a local you don't need this
cccversion = 2.3.2
ccckeepalive = 1
[reader]
label = server2
protocol = cccam_mcs
device =
user =
password =
inactivitytimeout = 30
disablecrccws_only_for = 098C:000000;09C4:000000
group = 1
disablecrccws = 1
cccversion = 2.3.2
ccckeepalive = 1
[reader]
label = server3
protocol = cccam
You need to read the wiki and stop copy and paste
Sorry!!!
-
And these are the other options in the feed software, which should be the best of them that they do not freeze the image anymore?
you used oscam for sh4 ok not diverse revision
-
Regards, I use oscam11517 with these settings but Sky De does not want to shine. What's wrong?
oscam.server generated automatically by Streamboard OSCAM build-DreamOSat-1.20_svn SVN r11517-795
# Read more: http://www.streamboard.tv/svn/…/doc/txt/oscam.server.txt
[reader]
label = constant.cw
enable = 0
protocol = constcw
device = /etc/tuxbox/config/constant.cw
caid = 2600,0B00,0B02,0500,0963,06AD,0940
group = 2
[reader]
label = emulator
protocol = emu
device = emulator
disablecrccws_only_for = 0500:50F000;09C4:000000;098C:000000;098D:000000
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
[reader]
label = server1
protocol = cccam_mcs
device =
user =
password =
inactivitytimeout = 30
disablecrccws_only_for = 098C:000000;09C4:000000
group = 1
disablecrccws = 1
cccversion = 2.3.2
ccckeepalive = 1
[reader]
label = server2
protocol = cccam_mcs
device =
user =
password =
inactivitytimeout = 30
disablecrccws_only_for = 098C:000000;09C4:000000
group = 1
disablecrccws = 1
cccversion = 2.3.2
ccckeepalive = 1
[reader]
label = server3
protocol = cccam
the settings must be set to global as shown in the photo
PS: if you don't have a card, you just need this one 0500: 030B00; 0500: 50F000; 09C4: 000000; 098C: 000000; 098D: 000000 on global instead if it has local cards you have to put on the reader if from the card give
disablecrccws = 1
if you don't give the lines from the reader out you can enable both of them come from photos
-
Hello, i wrote this 0500:50F000;098C:000000;09C4:000000;098D:000000, but i still can't watch sky de. What's the problem ?
-
Hello, i wrote this 0500:50F000;098C:000000;09C4:000000;098D:000000, but i still can't watch sky de. What's the problem ?
you should ask your service provider. he should do something on the server to give you Sky D
-
11517 is pretty good but it's sometimes a bit jerky on some channels. I'm sure those clever bods will come up with an even better version. In the mean its a thank you to them for all their hard work.
-
Ncam 9.8 best super best my configuration
Lg sedutor
[reader]
label = server1
protocol = cccam
device =
user =
password =
inactivitytimeout = 30
disablecrccws_only_for = 0500:50F000;09C4:000000;098C:000000;098D:000000
group = 1
emmcache = 1,1,3,1
dropbadcws = 1
cccversion = 2.3.2
cccmaxhops = 1
ccckeepalive = 1
cccreshare = 0
disablecrccws = 1
-
@ sedutor what Image do you use ?
greeting
-
Ncam 9.8 best super best my configuration
Lg sedutor
[reader]
label = server1
protocol = cccam
device =
user =
password =
inactivitytimeout = 30
disablecrccws_only_for = 0500:50F000;09C4:000000;098C:000000;098D:000000
group = 1
emmcache = 1,1,3,1
dropbadcws = 1
cccversion = 2.3.2
cccmaxhops = 1
ccckeepalive = 1
cccreshare = 0
disablecrccws = 1
so for sky de it is better this way and don't do experiments that you don't need, the same configuration must have both the server and the client
look Photo
1 Photo Config Global
2 Photo only if you have the card and no if you have a line
3 if they give you a cccam line or you want to give a cccam line and put on oscam.server this way[reader]
label = Oscam
protocol = cccam
device = IP OR DNS,PORT
user = XXXXX
password = XXXXX
inactivitytimeout = 30
group = 1 or 2 or 3 depends on the readers you have
cccversion = 2.3.2
ccckeepalive = 1
this configuration has also been approved by Streamboard all the others are configurations that with some oscams go well with others not
so this is a configuration that is 100% secure for all revisions starting from 11292 to the latest version. If you have other older oscams, you do not have a stability only activating disablecrccws = 1
-
the sky one still black screen any know if it work ing ?
-
I have OBH image on Vu+ Uno4K with OSCam r11516. After I did online image update to V4.2.041, the oscam didn't worked, so I installed it again and it worked. Then I edited the global configuration as Post 39 and the German Package on 19.2e is working fine now. Thanks to all.
-
the sky one still black screen any know if it work ing ?
It's very rare that Sky 1 is viewable.
-
do not work in 4k channels and no Sky 1 can only see on kabel deutschland or with sky with internet
-
it's not working for me, I have a Amiko Alien 2 that now has the latest oscam 11517 installed, I also added these settings:
- disablecrccws_only_for=0500:50F000;09C4:000000;098C:000000;098D:000000
- disablecrccws=1
to the oscam.server file, them I restarted the cam and it's still black can anyone help me with this issue?
Thanks in advance!
-
then on oscam.config below global you have to add this
disablecrccws_only_for = 0500: 030B00; 0500: 50F000; 09C4: 000000; 098C: 000000; 098D: 000000
please look photo or 1 oscam.config.PNG or 2 oscam global.PNG
if you have a local sky card you must also add this if you share your card but only the local card (PS:if you don't have local cards you don't need to apply step 4 and 5)
please look photo or 4 realcard.PNG or 5 Realcard 2.PNG
only if you have a sky card and no line!!!!!!!!!!!
I put these photos 20 times but there are always new openings instead of using the search button on the forum -
I have OBH image on Vu+ Uno4K with OSCam r11516. After I did online image update to V4.2.041, the oscam didn't worked, so I installed it again and it worked. Then I edited the global configuration as Post 39 and the German Package on 19.2e is working fine now. Thanks to all.
it makes no sense to activate both if you don't have local cards and you have to share
if you have to share it is better to put disablecrccws = 1
on the reader directly if you do not have to share then you can make the config of post # 39 but know that the disablecrccws = 1
he does it on all the cards
if instead you don't have card local sky de not make disablecrccws = 1
but only
disablecrccws_only_for = 0500: 030B00; 0500: 50F000; 09C4: 000000; 098C: 000000; 098D: 000000
the same thing must be for server and client look my post #90and #96
-
-
Nino, I edited your message a bit to try to make it a bit more readable and unambiguous (in English):
"It makes no sense to activate both lines in the config file, if you don't have a DE smartcard locally.If you have an original subscription DE smartcard to share, then it is better to put
disablecrccws = 1
on the reader itself.
If you do not have a card to share, then you can use the config from post #39.
But know this: disablecrccws = 1
does it on all the cards, in all encryption systems.
So, if you don't have a smartcard locally (sky de), do not use disablecrccws = 1
but only
disablecrccws_only_for = 0E00:000000;0500:030B00;0500:050F00;09C4:000000;098C:000000;098D:000000
Warning: the same thing must be used in server and client config - look at my posts #90and #96."
Is this correct? :)
-
Nino, I edited your message a bit to try to make it a bit more readable and unambiguous (in English):
"It makes no sense to activate both lines in the config file, if you don't have a DE smartcard locally.If you have an original subscription DE smartcard to share, then it is better to put
disablecrccws = 1
on the reader itself.
If you do not have a card to share, then you can use the config from post #39.
But know this: disablecrccws = 1
does it on all the cards, in all encryption systems.
So, if you don't have a smartcard locally (sky de), do not use disablecrccws = 1
but only
disablecrccws_only_for = 0500: 030B00; 0500: 50F000; 09C4: 000000; 098C: 000000; 098D: 000000
Warning: the same thing must be used in server and client config - look my post #90and #96."
Is this correct? :)
hello but I repeated it 100 times but always the same question and 20 different posts open when you just start the search on the forum
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!