SKY DE

There are 469 replies in this Thread which was already clicked 176,240 times. The last Post () by W@Rp.

    Sorry!!!

    369d0a4e099.png


    the settings must be set to global as shown in the photo

    PS: if you don't have a card, you just need this one 0500: 030B00; 0500: 50F000; 09C4: 000000; 098C: 000000; 098D: 000000 on global instead if it has local cards you have to put on the reader if from the card give

    disablecrccws = 1


    if you don't give the lines from the reader out you can enable both of them come from photos

    Quote from medialink

    Hello, i wrote this 0500:50F000;098C:000000;09C4:000000;098D:000000, but i still can't watch sky de. What's the problem ?

    you should ask your service provider. he should do something on the server to give you Sky D

    tordijal T-90 multifeed 5w,0.8w,1.9e,4.8e,9e,13e,16e,19.2e,23.5e,28e,33e,39e
    Triax 80 - Hispasat 30W
    Sony Masters OLED XR-48A90K
    VU UNO 4K SE - open atv,open pli,open BH....
    TERRA UHF POJAČALO AB011T
    FTE Eye 5G Lte2( 21-48 ) - Sveta Nedelja & Zaprešić
    SPAUN sparos HD DVB-T(2)/DVB-S(2) Analyzer
    Playstation 5

    11517 is pretty good but it's sometimes a bit jerky on some channels. I'm sure those clever bods will come up with an even better version. In the mean its a thank you to them for all their hard work.

    Ncam 9.8 best super best my configuration

    Lg sedutor


    [reader]

    label = server1

    protocol = cccam

    device =

    user =

    password =

    inactivitytimeout = 30

    disablecrccws_only_for = 0500:50F000;09C4:000000;098C:000000;098D:000000

    group = 1

    emmcache = 1,1,3,1

    dropbadcws = 1

    cccversion = 2.3.2

    cccmaxhops = 1

    ccckeepalive = 1

    cccreshare = 0

    disablecrccws = 1

    so for sky de it is better this way and don't do experiments that you don't need, the same configuration must have both the server and the client

    look Photo

    1 Photo Config Global

    2 Photo only if you have the card and no if you have a line

    3 if they give you a cccam line or you want to give a cccam line and put on oscam.server this way

    [reader]

    label = Oscam

    protocol = cccam

    device = IP OR DNS,PORT

    user = XXXXX

    password = XXXXX

    inactivitytimeout = 30

    group = 1 or 2 or 3 depends on the readers you have

    cccversion = 2.3.2

    ccckeepalive = 1


    this configuration has also been approved by Streamboard all the others are configurations that with some oscams go well with others not

    so this is a configuration that is 100% secure for all revisions starting from 11292 to the latest version. If you have other older oscams, you do not have a stability only activating disablecrccws = 1

    I have OBH image on Vu+ Uno4K with OSCam r11516. After I did online image update to V4.2.041, the oscam didn't worked, so I installed it again and it worked. Then I edited the global configuration as Post 39 and the German Package on 19.2e is working fine now. Thanks to all.

    it's not working for me, I have a Amiko Alien 2 that now has the latest oscam 11517 installed, I also added these settings:

    • disablecrccws_only_for=0500:50F000;09C4:000000;098C:000000;098D:000000
    • disablecrccws=1

    to the oscam.server file, them I restarted the cam and it's still black can anyone help me with this issue?

    Thanks in advance!

    then on oscam.config below global you have to add this


    disablecrccws_only_for = 0500: 030B00; 0500: 50F000; 09C4: 000000; 098C: 000000; 098D: 000000


    please look photo or 1 oscam.config.PNG or 2 oscam global.PNG

    if you have a local sky card you must also add this if you share your card but only the local card (PS:if you don't have local cards you don't need to apply step 4 and 5)

    please look photo or 4 realcard.PNG or 5 Realcard 2.PNG



    only if you have a sky card and no line!!!!!!!!!!!


    I put these photos 20 times but there are always new openings instead of using the search button on the forum



    Quote from manuel06

    I have OBH image on Vu+ Uno4K with OSCam r11516. After I did online image update to V4.2.041, the oscam didn't worked, so I installed it again and it worked. Then I edited the global configuration as Post 39 and the German Package on 19.2e is working fine now. Thanks to all.

    it makes no sense to activate both if you don't have local cards and you have to share


    if you have to share it is better to put disablecrccws = 1

    on the reader directly if you do not have to share then you can make the config of post # 39 but know that the disablecrccws = 1

    he does it on all the cards

    if instead you don't have card local sky de not make disablecrccws = 1

    but only

    disablecrccws_only_for = 0500: 030B00; 0500: 50F000; 09C4: 000000; 098C: 000000; 098D: 000000

    the same thing must be for server and client look my post #90and #96

    Nino, I edited your message a bit to try to make it a bit more readable and unambiguous (in English):

    "It makes no sense to activate both lines in the config file, if you don't have a DE smartcard locally.


    If you have an original subscription DE smartcard to share, then it is better to put

    disablecrccws = 1

    on the reader itself.


    If you do not have a card to share, then you can use the config from post #39.


    But know this: disablecrccws = 1

    does it on all the cards, in all encryption systems.


    So, if you don't have a smartcard locally (sky de), do not use disablecrccws = 1

    but only

    disablecrccws_only_for = 0E00:000000;0500:030B00;0500:050F00;09C4:000000;098C:000000;098D:000000


    Warning: the same thing must be used in server and client config - look at my posts #90and #96."


    Is this correct? :)

    "Enlightenment is man's emergence from his self-incurred immaturity. Immaturity is the inability to use one's own understanding without the guidance of another. This immaturity is self-incurred if its cause is not lack of understanding, but lack of resolution and courage to use it without the guidance of another. The motto of enlightenment is therefore: Sapere aude! Have courage to use your own understanding!"


    http://www.columbia.edu/acis/ets/CCREAD/etscc/kant.html

    Like 1

    hello but I repeated it 100 times but always the same question and 20 different posts open when you just start the search on the forum

    :GMlinuxsat1:

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login