Hehe, just trying to take a bit of load off your back, m8... :)
SKY DE
- Aldiman
- Closed
- Thread is marked as Resolved.
-
-
then on oscam.config below global you have to add this
disablecrccws_only_for = 0500: 030B00; 0500: 50F000; 09C4: 000000; 098C: 000000; 098D: 000000
please look photo or 1 oscam.config.PNG or 2 oscam global.PNG
if you have a local sky card you must also add this if you share your card but only the local card (PS:if you don't have local cards you don't need to apply step 4 and 5)
please look photo or 4 realcard.PNG or 5 Realcard 2.PNG
only if you have a sky card and no line!!!!!!!!!!!
I put these photos 20 times but there are always new openings instead of using the search button on the forumYou all need to stop copying and pasting bad info and understand what you are sharing, I have seen this on so many forums.
There is no 0500::50F000 it is 0500:050F00
This is a Viaccess card and the reason for it is to make Dorcel work on 19.2e, if you don't view it or need it don't add it.
-
Hi, I have two configurations in two home.
CONF-1- from ext-> a receiver with oscam11245 with oscam.reader with disablecrccws = 1, work fine .
CONF-2--from ext-> a PC-X86 with oscam11245 with oscam.reader with disablecrccws = 1, --> a receiver with oscam11245 with oscam.reader with disablecrccws = 1no work !!! Why .Can you help me?
-
Hi, I have two configurations in two home.
CONF-1- from ext-> a receiver with oscam11245 with oscam.reader with disablecrccws = 1, work fine .
CONF-2--from ext-> a PC-X86 with oscam11245 with oscam.reader with disablecrccws = 1, --> a receiver with oscam11245 with oscam.reader with disablecrccws = 1no work !!! Why .Can you help me?
disablecrccws=1 is best if you have local card but you are using old oscam without the latest fix's so you are wasting your time.
-
There is no 0500::50F000 it is 0500:050F00
This is a Viaccess card and the reason for it is to make Dorcel work on 19.2e, if you don't view it or need it don't add it.
Correct, thanx for pointing it out - thankfully that's how it was in my original OSCam config...
disablecrccws_only_for = 0E00:000000;0500:030B00;0500:050F00;09C4:000000;098C:000000;098D:000000
And Dorcel on 19E does work... :)
Sometimes these things happen...
Chill... ;)
-
There is no 0500::50F000 it is 0500:050F00
This is a Viaccess card and the reason for it is to make Dorcel work on 19.2e, if you don't view it or need it don't add it.
Correct, thanx for pointing it out - thankfully that's how it was in my original OSCam config...
disablecrccws_only_for = 0E00:000000;0500:050F00;09C4:0000 00;098C:000000;098D:000000
And Dorcel on 19E does work... :)
Sometimes these things happen...
Chill... ;)
please in oscam.config
paste
disablecrccws_only_for = 0500:030B00;0500:050F00;09C4:000000;098C:000000;098D:000000
work fine dorocel tnt sky de srg and hustler
PS: and dorcel on 19.2 the channels work from 23 onwards -
Thanx, m8, for the addition of 0500:030B00!
Btw, as Artorius pointed out, you are missing a 0 in your line, in Viaccess:
disablecrccws_only_for = 0E00:000000;0500:050F00;09C4:000000;098C:000000;098D:000000
-
Thanx, m8, for the addition of 0500:030B00!
Btw, as Artorius pointed out, you are missing a 0 in your line, in Viaccess:
disablecrccws_only_for = 0E00:000000;0500:050F00;09C4:000000;098C:000000;098D:000000
sorry in writing I was wrong to put the 0 in front
so is good
disablecrccws_only_for = 0500:030B00;0500:050F00;09C4:000000;098C:000000;098D:000000if you own local cards and share you must also add on your and the client's readers
disablecrccws = 1
PS: you must also add only if you have local cards
PS: for porno card in osca.config add unlockparental = 1
a0523191a2e8ec16e.png77efce38.pngb8e50ce6d01365a800b053e7.png -
I am using the latest Oscam 11517 with with fix log_bad_cw for Sky Ger, I made the necessary settings for disablecrccws_only_for, but I still have lots and lots of freezes. ECM response time is under 200 ms for 098C caid. What can I do to get rid of freezes?
-
I am using the latest Oscam 11517 with with fix log_bad_cw for Sky Ger, I made the necessary settings for disablecrccws_only_for, but I still have lots and lots of freezes. ECM response time is under 200 ms for 098C caid. What can I do to get rid of freezes?
tell them who gives you the line to adjust their info or if you have more cccam to oscam readers leave only one with sky de and the others deactivate the services or those who give you the line has not yet made the settings
-
done
-
but multics with oscam and cccam
cum este
-
hii
on my vu+ 4k i just convert cccam to oscam using converter testing all Oscam around with VTI image no chance for sky
all other channels are fine but
any idea for it ?
-
Replays.............................
cccam to oscam reader[reader]
label = Oscam
protocol = cccam
device = your ip or dns,port
user = xxxxx
password = xxxxx
inactivitytimeout = 30
group = 7
emmcache = 1,1,2,0
cccversion = 2.3.2
ccckeepalive = 1
-
does it have to be version 11517 or the latest version 11518 should work too?
-
Oscam 11517 viel besser
Lg sedutor
-
ok thanks
-
Oscam 11517 viel besser
Lg sedutor
Thank you!
-
Replays.............................
cccam to oscam reader[reader]
label = Oscam
protocol = cccam
device = your ip or dns,port
user = xxxxx
password = xxxxx
inactivitytimeout = 30
group = 7
emmcache = 1,1,2,0
cccversion = 2.3.2
ccckeepalive = 1
ok tnx for answer
when change the ccam to oscam with that program these are the exact values which comes out
i tried your method with 11517 (vti image) on vu+ 4k but no chance
please correct these lines for me
[reader]
label=MY DNS
enable=1
protocol=cccam
device=IP,PORT
user=XXXX
password=XXXX
cccversion=2.1.2
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccmaxhops=10
ccckeepalive=1
cccwantemu=0
-
what that COMPOST for oscam ?? by the way and what is it ?!!
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!