i
have set up Ubuntu server with the help of the guide from Ten Below and it working a treat i have a line that i have a re share on and that works fine my dm8oo in another room gets hops 2
when i put my smargo in with my s88 uk card it cc cam will not read it
i have ran the lsusb command and think it is on usb 2 or 3 so have configured cc cam for both but i think i am missing something here are my scripts with a few things edited for obvious reasons
thanks
CCCam config
LLOW WEBINFO: yes
WEBINFO LISTEN PORT : 16001
WEBINFO USERNAME : mumanddad
WEBINFO PASSWORD : mumanddad
SERVER LISTEN PORT : 9999
SERIAL READER : /dev/ttyUSB3 smartreader+
SERIAL READER : /dev/ttyUSB2 smartreader+
SMARTCARD CLOCK FREQUENCY : /dev/ttyUSB3 6000000
SMARTCARD CLOCK FREQUENCY : /dev/ttyUSB2 6000000
BOXKEY : /dev/ttyUSB3 13 aa bb cc
BOXKEY : /dev/ttyUSB2 13 aa bb cc
C: #########@dyndns.org 12000 myown reshare no { 0:0:3 }
F: boo 1234321 2 0 0 { 0:0:3 }
Lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 413c:3200 Dell Computer Corp. Mouse
Bus 004 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
….....................................................................................................................................................
bus 003 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC