startrack 2020 HD plus - spark sti 7162- 1.2.85_app & 1.2.86 _ app &1.2.74 _ app

startrack 2020 HD plus - spark sti 7162- 1.2.85_app & 1.2.86 _ app &1.2.74 _ app

This is an old version, Not available for many

use kingston or sandisk usb 4 or 8 GB

Make sure that the folder is not inside another folder, and there is no any Foldr it except Foldr plugin only.

After unzip the attached file, transfer the file to the usb and place it in the device. & so on as you Learn to install

 Good luck

These are not links, this version is loaded on the forum Server, so how does it not work?

Quote from qaziabid82

Need version above 1.2.74 for startrack 2020hd 7111 chip

Quote from qaziabid82

Please i need spark latest version for startrack 2020hd 7111

Go to the page on the following link

https://www.golden-forum.com/viewtopic.php?t=37591

Quote from Bilal1980dz47

Please can you help me to fix boot problem superbox 750?

Thanks

Go to the page on the following link

https://www.mr-dish.com/2015/12/superbox-spark-s750.html

Quote from chawki86

hi i have startrack 2020 hd plus 7111 i have problem boot i keep your advace in usb ok force and foalder spark rescue ..box affiche succ but dosent work and no picture in screen tv his stay boot ..pleace help me i not find solution in the box ..last soft is 2012

Use the software STARTRACK_SRT 2020HD PLUS_Loader from my topic in the forum from here

Thread

startrack 2020 HD plus - spark sti 7162- rescue-image-1.2.65 & 1.2.58 & STARTRACK_SRT 2020HD PLUS_Loader

startrack 2020 HD plus - spark sti 7162- rescue-image-1.2.65 & 1.2.58 & STARTRACK_SRT 2020HD PLUS_Loader







First, remove any external flash that is installed on the device

Second, start with this solution and implement what is contained in it
Close the device from the power button in the back and Click on the ok from the front of the receiver for 5 seconds, then not leave ok, and

open the device from power button in the back,Until it Appears on the screen is forc supported you from Ok, then you…

ahmed gazye

Mar 13th 2020

and use the method from my topic in the forum from here

Thread

Method of passing the rescue-image​​ for Spark devices using Cisco TFTP Server

linuxsat-support.com/cms/attachment/139070/







Method of passing the rescue-image for Spark devices using Cisco TFTP Server



In some cases Spark devices not accept soft rescue in by usb

Most of the problems of not accepting the rescue-image will be a defect from the usb that the device cannot read from
So we will use passing the rescue-image for Spark devices using Cisco TFTP Server



We connect the computer with the receiver with a regular Ethernet network cord














Then we enter the network settings into…

ahmed gazye

Mar 15th 2020