Softcam.Key Enigma2 for American Satellites

I doubt that it is the version, rather that it does not have the debug option, look for a compatible oscam and I repeat: what version of openssl do you have?

Anyone know if the EMM keys for 127W - 4100/H have changed? Had it auto-rolling for the longest time but today it stopped working. This is what I currently have:

P 1127 00643ECC EC13D87FDF1729
P 1127 00652814 3808E60B57912D

Search the internet for keys for BBC/TV5 but you can try extracting EMM keys from EMM pid using PVHE

Good Morning Everyone! I am back online trying to rebuild my systems after a storm did a number on my BUD. I have been successful with most items that I have been slowly rebuilding. I do have an issue with 103W TP 3930. This TP is new and apparently has replaced TP3940. Does anyone have the keys to this new TP? Thanks in advance for any help.

If only the frequency has changed, the keys should remain the same (only the HASH for GROUP will change).

Quote from EnoSat

If only the frequency has changed, the keys should remain the same (only the HASH for GROUP will change).

yes, and do not forget that the keys are rolling every so often: good keys from yesterday may not be good today !

e.g.:

P 1032FFFF 00 A03A02F51F0F99 ; added by Emu Sun Aug 3 23:19:27

P 1032FFFF 00 6BD004F46C551B ; added by Emu Thu Aug 14 14:15:13

With the above method, if the channel ID has not changed or no more channels have been added to the TP, it is for me a better option, especially if for whatever reason you like your antenna moves or mismatches, the HASH changes, this ruins the softcam and you have to correct it;

Quote from JDavid22

With the above method, if the channel ID has not changed or no more channels have been added to the TP, it is for me a better option, especially if for whatever reason you like your antenna moves or mismatches, the HASH changes, this ruins the softcam and you have to correct it;

If the dish is moving or moved by the wind, that means you have or not a signal, but that doesn't affect the softcam.

Move your antenna a little, without losing all your signal, do a blindscan and let me know what happens.

on 4,8 east i need powervu key

ECM key no problem, problem ECM algo

Hello!

I'm new to C Band , but I've already managed to point my antenna in Portugal towards SES6 40.5W. It's not 100% tuned yet, but I'm getting a good signal on some TPs. The problem is that I've searched all over the internet and can't find any valid powervu keys for this satellite. For example, for 3923 R (AMC Brazil, Mexico, Film Arts), 4061 R (GolTV Uruguay), 3979 Fox Sports...

Do these keys exist, or is it impossible to unlock the channels?

If it's impossible, there's no point in wasting any more time tuning the antenna to this satellite :/

Thank you.

Of course you do know that it is a circular polarized satellite and you will get some channels if you don't insert the depolarizer in the feed throat.

Once you do, many more transponders will pop in with good signal. As far as keys go. Because I don't watch it because of the need for the slab (mostly linear sats watched), Rambohack might be able to help.

Quote from supwiddiss

Of course you do know that it is a circular polarized satellite and you will get some channels if you don't insert the depolarizer in the feed throat.

Once you do, many more transponders will pop in with good signal. As far as keys go. Because I don't watch it because of the need for the slab (mostly linear sats watched), Rambohack might be able to help.

Thank you supwiddiss!I have the dielectric plate inserted, but my antenna dish is not extremely large( 1,80m) Ideally, it would be 2.40m. I don't expect to get all the transponders, but if it's well tuned, I believe I'll get a good signal on some.I've looked a lot, but everything I find are very old PowerVu keys. Here in the forum, no softcam.key has these keys.I'll wait then, maybe Rambohack can help me! =)

Quote from maneldascoubes

Quote from supwiddiss

Of course you do know that it is a circular polarized satellite and you will get some channels if you don't insert the depolarizer in the feed throat.

Once you do, many more transponders will pop in with good signal. As far as keys go. Because I don't watch it because of the need for the slab (mostly linear sats watched), Rambohack might be able to help.

Thank you supwiddiss!I have the dielectric plate inserted, but my antenna dish is not extremely large( 1,80m) Ideally, it would be 2.40m. I don't expect to get all the transponders, but if it's well tuned, I believe I'll get a good signal on some.I've looked a lot, but everything I find are very old PowerVu keys. Here in the forum, no softcam.key has these keys.I'll wait then, maybe Rambohack can help me! =)

You've been here?

Keys

Quote from supwiddiss

Quote from maneldascoubes

Quote from supwiddiss

Of course you do know that it is a circular polarized satellite and you will get some channels if you don't insert the depolarizer in the feed throat.

Once you do, many more transponders will pop in with good signal. As far as keys go. Because I don't watch it because of the need for the slab (mostly linear sats watched), Rambohack might be able to help.

Thank you supwiddiss!I have the dielectric plate inserted, but my antenna dish is not extremely large( 1,80m) Ideally, it would be 2.40m. I don't expect to get all the transponders, but if it's well tuned, I believe I'll get a good signal on some.I've looked a lot, but everything I find are very old PowerVu keys. Here in the forum, no softcam.key has these keys.I'll wait then, maybe Rambohack can help me! =)

You've been here?

Keys

Thank you!

I've already tried those, but I think they're old and don't work.

Perhaps there are no keys available at the moment and it's impossible to open these PowerVu SES 45W channels.

Quote from maneldascoubes

The problem is that I've searched all over the internet and can't find any valid powervu keys for this satellite. For example, for 3923 R (AMC Brazil, Mexico, Film Arts), 4061 R (GolTV Uruguay), 3979 Fox Sports...

https://enosat.euweb.cz/emusa.html - RED not work in old EMU (GREEN work but not updated)

Quote from maneldascoubes

Quote from supwiddiss

Quote from maneldascoubes

Quote from supwiddiss

Of course you do know that it is a circular polarized satellite and you will get some channels if you don't insert the depolarizer in the feed throat.

Once you do, many more transponders will pop in with good signal. As far as keys go. Because I don't watch it because of the need for the slab (mostly linear sats watched), Rambohack might be able to help.

Thank you supwiddiss!I have the dielectric plate inserted, but my antenna dish is not extremely large( 1,80m) Ideally, it would be 2.40m. I don't expect to get all the transponders, but if it's well tuned, I believe I'll get a good signal on some.I've looked a lot, but everything I find are very old PowerVu keys. Here in the forum, no softcam.key has these keys.I'll wait then, maybe Rambohack can help me! =)

You've been here?

Keys

Thank you!

I've already tried those, but I think they're old and don't work.

Perhaps there are no keys available at the moment and it's impossible to open these PowerVu SES 45W channels.

Display More

I'm sorry! It was my mistake, I didn't copy the correct file. Those keys from the link you shared work! :) I can now open the PowerVu channels that I can receive (AMC's). I want to try to receive the Fox Sports Argentina and GolTv channels, but their signal must be very weak and so far I haven't been able to. Strange, because for example on the AMC channels (3923 R) I get 12db SNR (75/80%)