Ncam Emu by RAED

cengizkartal · Apr 7th 2024

I couldn't run encrypted channels on my PC Linux, I wonder why I made a mistake somewhere.

Code

Unix starttime: 1712525834
Starttime:      08.04.2024 00:37:14
Version:        NCam-Unofficial-StreamRelay
Revision:       gitd8f2921
Build:          08-04-2024
Cache exchange: 9.2.6
Compiler:       x86_64-linux-gnu-ssl-libusb-libdvbcsa
Box type:       generic (generic)
PID:            2017
TempDir:        /tmp/.ncam
GBox tmp_dir:   not defined using: /tmp/.ncam
ConfigDir:      /etc/tuxbox/config/
WebifPort:      8181


Web interface support:                   yes
LiveLog support:                         yes
jQuery support intern:                   yes
Touch interface support:                 no
SSL support:                             yes
DVB API support:                         yes
DVB API with NEUTRINO support:           no
DVB API read-sdt charsets:               yes
DVB API with Stream Relay support:       yes
Anti-cascading support:                  yes
Debug mode:                              yes
Monitor:                                 yes
Loadbalancing support:                   yes
Cache exchange support:                  yes
Cache exchange AIO support:              yes
CW Cycle Check support:                  yes
LCD support:                             no
LED support:                             no
Clockfix with realtime clock:            no
IPv6 support:                            no
Curl to access URLs:                     no
Emulator support:                        yes
Built-in SoftCam.Key:                    yes


camd 3.3x:                               no
camd 3.5 UDP:                            yes
camd 3.5 TCP:                            yes
newcamd:                                 yes
CCcam:                                   yes
CCcam share:                             yes
gbox:                                    yes
radegast:                                no
scam:                                    yes
serial:                                  no
constant CW:                             yes
Pandora:                                 no
ghttp:                                   no
Streamrelay:                             yes


Reader support:                          yes


Nagra:                                   yes
Nagra Merlin:                            yes
Irdeto:                                  yes
Conax:                                   yes
Cryptoworks:                             yes
Seca:                                    yes
Viaccess:                                yes
NDS Videoguard:                          yes
DRE Crypt:                               yes
TONGFANG:                                yes
StreamGuard:                             yes
Jet:                                     yes
Bulcrypt:                                yes
Griffin:                                 yes
DGCrypt:                                 yes


Card Reader support:


Internal sci:                            yes
Phoenix:                                 yes
drecas:                                  no
SC8in1:                                  no
mp35:                                    no
Smargo:                                  no
PCSC:                                    no
Smartreader:                             yes
db2com:                                  no
Stinger:                                 yes



2024/04/08 00:37:14 00000000 s     (main) System name    = Linux
2024/04/08 00:37:14 00000000 s     (main) Host name      = star-Vostro-3670
2024/04/08 00:37:14 00000000 s     (main) Release        = 6.5.0-26-generic
2024/04/08 00:37:14 00000000 s     (main) Version        = #26~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Tue Mar 12 10:22:43 UTC 2
2024/04/08 00:37:14 00000000 s     (main) Machine        = x86_64
2024/04/08 00:37:14 00000000 s     (main) creating pidfile /tmp/.ncam/ncam.pid with pid 3007
2024/04/08 00:37:14 00000000 s   (config) CCcam.cfg read lines: C:3 N:0 L:0 R:0
2024/04/08 00:37:14 00000000 s    (relay) Stream Relay server initialized
2024/04/08 00:37:14 00000000 s      (emu) Emu version 801
2024/04/08 00:37:14 00000000 s   (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2024/04/08 00:37:14 00000000      (relay) INFO: dynamic dvbcsa parallel mode = 64 (relay buffer time: 0 ms)
2024/04/08 00:37:14 00000000 s     (main) signal handling initialized
2024/04/08 00:37:14 00000000 s   (reader) SoftCam.Keys [emu] creating thread for device /var/keys/SoftCam.keys
2024/04/08 00:37:14 00000000 s   (reader) s1.kcccam.cc_12003_2056929 [cccam] creating thread for device s1.kcccam.cc
2024/04/08 00:37:14 00000000 s   (reader) dhoom.org_17000_1day0ls [cccam] creating thread for device dhoom.org
2024/04/08 00:37:14 45527C5A r      (emu) Stream key delayer initialized
2024/04/08 00:37:14 45527C5A r   (reader) SoftCam.Keys [emu] Reader initialized (device=/var/keys/SoftCam.keys, detect=cd, mhz=357, cardmhz=357)
2024/04/08 00:37:14 00000000 s   (reader) dhoom.org_31000_1dayvbx [cccam] creating thread for device dhoom.org
2024/04/08 00:37:14 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2024/04/08 00:37:14 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2024/04/08 00:37:14 00000000 s (anticasc) anti cascading disabled
2024/04/08 00:37:14 00000000 s     (gbox) local gbox failed init
2024/04/08 00:37:14 09FB98BB c   (client) plain dvbapi-client granted (dvbapi, au=auto (4 reader))
2024/04/08 00:37:14 09FB98BB c   (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/ncam.ccache
2024/04/08 00:37:14 09FB98BB c   (dvbapi) Using TCP listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 12
2024/04/08 00:37:14 151382D3 h    (webif) webif: decompressed 225894 bytes back into 483248 bytes
2024/04/08 00:37:14 151382D3 h    (webif) HTTP Server running. ip=0.0.0.0 port=8181
2024/04/08 00:37:14 422625EA p   (reader) dhoom.org: resolved ip=49.13.170.11
2024/04/08 00:37:14 422625EA p   (reader) dhoom.org_17000_1day0ls [cccam] connecting to dhoom.org:17000
2024/04/08 00:37:14 0D0D1614 p   (reader) s1.kcccam.cc: resolved ip=88.99.37.22
2024/04/08 00:37:14 0D0D1614 p   (reader) s1.kcccam.cc_12003_2056929 [cccam] connecting to s1.kcccam.cc:12003
2024/04/08 00:37:14 746C6141 p   (reader) dhoom.org: resolved ip=49.13.170.11
2024/04/08 00:37:14 746C6141 p   (reader) dhoom.org_31000_1dayvbx [cccam] connecting to dhoom.org:31000
2024/04/08 00:37:14 422625EA p   (reader) dhoom.org_17000_1day0ls [cccam] proxy initialized, server dhoom.org:17000
2024/04/08 00:37:14 746C6141 p   (reader) dhoom.org_31000_1dayvbx [cccam] proxy initialized, server dhoom.org:31000
2024/04/08 00:37:14 0D0D1614 p   (reader) s1.kcccam.cc_12003_2056929 [cccam] proxy initialized, server s1.kcccam.cc:12003
2024/04/08 00:37:15 45527C5A r   (reader) SoftCam.Keys [emu] card detected
2024/04/08 00:37:16 45527C5A r   (reader) SoftCam.Keys [emu] found card system emu
2024/04/08 00:37:16 45527C5A r   (reader) SoftCam.Keys [emu] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max allotted of 1
2024/04/08 00:37:16 45527C5A r      (emu) Cannot open key file path: /var/keys/SoftCam.keys
2024/04/08 00:37:16 45527C5A r      (emu) Cannot open key file path: /var/keys
2024/04/08 00:37:16 45527C5A r      (emu) Total keys in memory: W:0 V:0 N:0 I:0 F:0 G:0 O:0 P:0 T:0 A:0
2024/04/08 00:39:05 09FB98BB c   (dvbapi) ERROR: error on poll of 1 fd's (errno=0 Success)

Display More

cengizkartal · Apr 7th 2024

I forgot to add NCam

works great

galletti · May 1st 2024

i've installed

MOHAMED_OS r11734-799 and some sky de channels are ok!

which stream relay list i've to install on zgemma h9?

is it normal that only some of them are ok?

**Linesman** · May 2nd 2024

There has been transponder changes with

Various channels

https://www.google.com/url?sa=t&source=web&rct=j&opi=89978449&url=https://en.kingofsat.net/news19.2E.php&ved=2ahUKEwi09LmZvO-FAxVCQ0EAHXukAf4QFnoECB0QAQ&usg=AOvVaw2FRNuLxL5NtlXe4glsfsbQ

Then update icam bouquets

protomaster · May 21st 2024

hi where can i find the latest icam bouqets to download?

bountyhunter21 · May 21st 2024

You don't need them anymore for skyde If you have a recent image installed, but on those settings

File

Enigma2 ciefpsettings

ciefp Enigma2 Settings Download. Custom Satellite Channel list for Intelsat 34.5 West ~ ABS 75.0 East with IPTV Stream TV And MultiStream for ZeonBud T2-MI Astra 4.8°E & Abertis Hispasat 30 West.

ciefp

Friday, 9:03 pm

They are included so you can transfer them and use the icam bouquet

Or just transfer the whiltelist file that is also included In etc/enigma2, and the channels will play like normal channels.

protomaster · May 21st 2024

thank you. works icam only with astra 19 sky germany or are there other sattelittes and other channels which are open with icam?

hondasat · May 24th 2024

Quote from protomaster

thank you. works icam only with astra 19 sky germany or are there other sattelittes and other channels which are open with icam?

nope, those are the only "interesting" ones.

**B@baYaga** · Jun 23rd 2024

i have a few questions has someone managed to change the template by me it does not take over.

and why on my card is there 3 entitlements displayed at oscam, and if I use ncam , only 2.

**fairbird** · Jun 25th 2024

Quote from B@baYaga

i have a few questions has someone managed to change the template by me it does not take over.
and why on my card is there 3 entitlements displayed at oscam, and if I use ncam , only 2.

which card and which template...?!

Also Did you tried to using (oscam.config, and oscam.server) settings in (ncam.config and ncam.server) files ?!!

**fairbird** · Jul 20th 2024

Update ...

Ncam V15.0

- omnicrypt: Add ecm support.

- Update reader-videoguard-common. this change has been in the forrums for a few years but not yet implemented thanks to (Didov3).

- revert to discarded parts, as they are also an important part of the module-serial.

- fix openssl dependency.

- added Fransat V6 cards to hanlde ECM of UHD Channels thanks to Constance and rumas84.

- add Dreambox Reader detection

- Dgcrypt 0x4AB0 with EMM * adding EMM Support for DGCRYPT 0x4AB0 thanks to lnj * adding support for non-standard ISO 7816-3 protocol for pcsc module thanks to lnj

- add hide Provid-SA IRDID

- Fix 'can't find 0xf0 in emm...' on Fransat V7 card (Thanks to nitida and OptimumPower)

Download link in first post

sagher · Jul 21st 2024

pc Linux x64 bin

command was ok

no error

but webif not works.

ncam unable to run.

gmild · Jul 21st 2024

ok on h9 2h se with opeatv 7.4

cengizkartal · Aug 10th 2024

Sir, you are a genius. Thank you very much.

oguz15 · Aug 13th 2024

Herkese merhaba cihazım hiremco matrix pro yayınları izlemek için ne yapmalıyım yardımcı olur musunuz? Kapalı hotbird astra vs uydulardaki yayınları teşekkürler.

andr3j · Aug 13th 2024

can this ncam open sky uk sd channels ?

if he can, how, what needs to be adjusted ?

Muaitai · Aug 13th 2024

I think you'll need proper slyUK icam bouquet.

A server that can supply the CW.

And ncam and box setup as this:

ncam.conf

pasted-from-clipboard.png

box webif

pasted-from-clipboard.png

lme · Aug 13th 2024

Quote from oguz15

Herkese merhaba cihazım hiremco matrix pro yayınları izlemek için ne yapmalıyım yardımcı olur musunuz? Kapalı hotbird astra vs uydulardaki yayınları teşekkürler.

English..?????

sagher · Aug 14th 2024

Anyone have working freeserver links for ncam please share updated ncam.fs file

satlog · Aug 14th 2024

please how to add mbox in dvbapi config

i have an similar receiver as

Amiko A5 (7.0_Nougat)

this bin file is start in ip:8888

but always black screen

trhank you

Ncam Emu by RAED

Your resource for Ncam softcam.

Participate now!

Share

Similar Threads

Ncam latest version for dreambox 800 hd se

enigma2-plugin-softcams-ncam-mips_V10.5-r2_all.ipk

Ncam with hash mode 34

AU is not going to ACTIVE modes

Ncam 10.0 compiled and patched by marouan & READ

Ncam 10.1 compiled and patched by READ

Tags