Ncam Emu by RAED

Config file OE2.5

Link dead

SoftCSA support is already used in open-source software.

I don't think it will work with DreamBox OE 2.5 software.

Quote from fairbird

P.s: The ncam already built in with (libdvbcsa) but to make more sure and test ..

Try to install (libdvbcsa1) from image feed if available

Aslo in ncam.conf

Update [streamrelay] with these settings .. the restart e2 not ncam and test

Code

[streamrelay]
stream_relay_enabled          = 1
stream_relay_port             = 17999
stream_relay_user             = stream
stream_relay_ctab             = 098C,098D
stream_source_host            = 127.0.0.1
stream_client_source_host     = 0
stream_source_port            = 8001
stream_source_auth_user       = 
stream_source_auth_password   = 
stream_relay_buffer_time      = 0
stream_relay_reconnect_count  = 0
stream_emm_enabled            = 0
stream_ecm_delay              = 1
stream_display_client         = 0
stream_reuse_client           = 0
stream_hide_client            = 0

Display More

And any one have free (C line) open the de.sky on hotbird13 or astra19.2 please send to me on PM (Thank you)

Display More

stream relay off

[streamrelay]
stream_ecm_delay = 5
stream_relay_ctab = 098D,0960,0961,0963,0919,093B,09CD
stream_relay_enabled = 1
stream_emm_enabled = 5
stream_relay_buffer_time = 1

streamrelay on

Quote from fairbird

P.s: The ncam already built in with (libdvbcsa) but to make more sure and test ..

Try to install (libdvbcsa1) from image feed if available

Aslo in ncam.conf

Update [streamrelay] with these settings .. the restart e2 not ncam and test

Code

[streamrelay]
stream_relay_enabled          = 1
stream_relay_port             = 17999
stream_relay_user             = stream
stream_relay_ctab             = 098C,098D
stream_source_host            = 127.0.0.1
stream_client_source_host     = 0
stream_source_port            = 8001
stream_source_auth_user       = 
stream_source_auth_password   = 
stream_relay_buffer_time      = 0
stream_relay_reconnect_count  = 0
stream_emm_enabled            = 0
stream_ecm_delay              = 1
stream_display_client         = 0
stream_reuse_client           = 0
stream_hide_client            = 0

Display More

And any one have free (C line) open the de.sky on hotbird13 or astra19.2 please send to me on PM (Thank you)

Display More

OK SkyDE ATV 5.1 Zgemma H9Combo

Why are there so many clines in ncam? ncam.aarch64

dreamtwo

Where do the Linnes come from? I don't know, they've been there since...ncam.aarch64

Vu+ Zero 4k with OpenPLI Scarthgap.

All OK.

Fairbird, thank you very much.

OK SkyDE it goo ncam.aarch6 thanks ncam 15.7

dreamtwo noobody 4.2

Quote from fairbird

Quote from norberto51

Quote from fairbird

P.s: The ncam already built in with (libdvbcsa) but to make more sure and test ..

Try to install (libdvbcsa1) from image feed if available

Aslo in ncam.conf

Update [streamrelay] with these settings .. the restart e2 not ncam and test

Code

[streamrelay]
stream_relay_enabled          = 1
stream_relay_port             = 17999
stream_relay_user             = stream
stream_relay_ctab             = 098C,098D
stream_source_host            = 127.0.0.1
stream_client_source_host     = 0
stream_source_port            = 8001
stream_source_auth_user       = 
stream_source_auth_password   = 
stream_relay_buffer_time      = 0
stream_relay_reconnect_count  = 0
stream_emm_enabled            = 0
stream_ecm_delay              = 1
stream_display_client         = 0
stream_reuse_client           = 0
stream_hide_client            = 0

Display More

And any one have free (C line) open the de.sky on hotbird13 or astra19.2 please send to me on PM (Thank you)

Display More

OK SkyDE ATV 5.1 Zgemma H9Combo

Display More

Quote from skovemi

Vu+ Zero 4k with OpenPLI .

All OK.

Fairbird, thank you very much.

Please tell us what config files using ?!!

original files ?!!

Display More

Download 15.7

and only in oscam.conf

pmt_mode = 6

extended_cw_api = 1

streamrelay disabled

Quote from dniestre

Quote from ftechno

Vu+Solo2 Ncam 15.7 with softcsa is supposed sky de 😍

1_0_19_74_4_85_C00000_0_0_0_20260215214848~2.jpg

Please note that SoftCSA only works with some Open images; DreamOS images do not support this type of ‘decoding’ for Sk* DE. You must continue to use StreamRelay.

Hi, I have a SatPong OpenPli Dm-920 and SoftCSA and OSCAM 11942 work perfectly,

but with NCAM it doesn't have any vision, nor with StreamRelay.

What can I say? There's some incompatibility.

Quote from fairbird

Quote from skovemi

Quote from fairbird

Quote from norberto51

Quote from fairbird

P.s: The ncam already built in with (libdvbcsa) but to make more sure and test ..

Try to install (libdvbcsa1) from image feed if available

Aslo in ncam.conf

Update [streamrelay] with these settings .. the restart e2 not ncam and test

Code

[streamrelay]
stream_relay_enabled          = 1
stream_relay_port             = 17999
stream_relay_user             = stream
stream_relay_ctab             = 098C,098D
stream_source_host            = 127.0.0.1
stream_client_source_host     = 0
stream_source_port            = 8001
stream_source_auth_user       = 
stream_source_auth_password   = 
stream_relay_buffer_time      = 0
stream_relay_reconnect_count  = 0
stream_emm_enabled            = 0
stream_ecm_delay              = 1
stream_display_client         = 0
stream_reuse_client           = 0
stream_hide_client            = 0

Display More

And any one have free (C line) open the de.sky on hotbird13 or astra19.2 please send to me on PM (Thank you)

Display More

OK SkyDE ATV 5.1 Zgemma H9Combo

Display More

Quote from skovemi

Vu+ Zero 4k with OpenPLI .

All OK.

Fairbird, thank you very much.

Please tell us what config files using ?!!

original files ?!!

Display More

Download 15.7

and only in oscam.conf

pmt_mode = 6

extended_cw_api = 1

streamrelay disabled

Display More

You means ncam.conf not oscam.conf

Yes, sorry.

Display More

Quote from fairbird

Quote from italia1950

OK SkyDE it goo ncam.aarch6 thanks ncam 15.7

dreamtwo noobody 4.2

Just after disabled free server back again ?!!

no, not there anymore

This POST did the trick

All is now okay with version 15.7

enigma2-plugin-softcams-ncam-osdreambox_V15.7-r0.deb okay with version jes -nogo

I had to leave

StreamRelay active