Ncam Emu compiled and patched by RAED

Quote from fairbird

@geisivi

What About powervu with last version 11.9 ?!!

Does open fast or not ?!!!

Hello @fairbird

I use two boxes (arm and mips). With the latest version Ncam 11.9, the box with mips processor (Dreambox dm800 hd se clone) emulates the PowerVu quickly. Instead, with the box equipped with an arm processor (Zgemma H9.2h), PowerVu emulates very quickly as well, but the screen remains black and no image is shown.

Quote from drini73

Quote from fairbird

@geisivi

What About powervu with last version 11.9 ?!!

Does open fast or not ?!!!

Hello @fairbird

I use two boxes (arm and mips). With the latest version Ncam 11.9, the box with mips processor (Dreambox dm800 hd se clone) emulates the PowerVu quickly. Instead, with the box equipped with an arm processor (Zgemma H9.2h), PowerVu emulates very quickly as well, but the screen remains black and no image is shown.

arm processor

screen black for

ncam.conf

[dvbapi]

extended_cw_api = 1

Quote from skier

arm processor

screen black for

ncam.conf

[dvbapi]

extended_cw_api = 1

Thanks a lot @skier!

This cam is not good, after a few hours of operation the processor use goes over 20% (hi3798mv200), the other emus do not go over 4%

Quote from fairbird

@geisivi

What About powervu with last version 11.9 ?!!

Does open fast or not ?!!!

Yes, it’s fast. All ok. Thank you!
arm processor, vu+4k

Hello. I used version 11.9 and transferred the CCcam.cfg file but the channels did not open. The emulator starts but does not work. It does not enter at all through the status and port 8181

Merhaba arkadaşlar!

ncam.conf en iyi pmt modu =?

(cihaz Octagon SF8008 4K

Quote from fairbird

Update ...

Ncam V11.9

Code

-Fix compile error (undefined-reference-to-'_binary_SoftCam_Key_start')
-powervu sharing is blocked (Not Services)
(Add this reader into the ncam.services file)
*My Config files updated already (no need to add it again)
*After this fix should be Ncam read powervu and update keys direct from softcam,key no need to read it from (ncam.fs or CCcam.cfg). So more fast to update keys
...
[emulator]
caid = 0E00
provid =
srvid =
...
-dvbapi FBC Tuner fix (oscam@11691)

Display More

All files download links from first post

Hi

Cannot be installed on dream elite 7.1

Thank you for you good work!

I have a situation. after upgrading from ncam 9 to ncam 11, i get the following error:

ncam-aarch64-11.9: /usr/lib/libcurl.so.4: no version information available (required by ncam-aarch64-11.9)

the device is Dreamox Ultra HD aarch64..

and i cannot what to do..

Thank you in advance!

Fairbird when we will have new improuved Ncam ?

is there a setting to auto start ncam emu without remote?

ncam-11.9 doesn't work on OpenATV 7.0 last update (14-09-2021).

by telnet test start:

/usr/lib/libcurl.so.4: version 'CURL_OPENSSL_4' not found (required by ./ncam-11.9)

Quote from fairbird

Did you installed ipk file or you sent the files manually ?!!!

With me on my DM920 + OpenATV 7.0 (Today update online) no problem ...

ea5c14b08805a869b35b6e.jpg

Ncam work just fine ...

Code

root@dm920:~# opkg install /tmp/*.ipk
Installing enigma2-plugin-softcams-ncam (V11.9) on root.
OE2.0 IMAGES: libssl1.1
OE2.0 IMAGES: libcrypto1.1
Configuring enigma2-plugin-softcams-ncam.
:Your Device IS ARM processor ...
openATV image
[ All Config Files found ]


-------------------------------------------------------
* Ncam Config & Softcam files in [/etc/tuxbox/config] *
-------------------------------------------------------


*******************************************
*             Install Finished            *
*                                         *
*         Need To Restart Enigma2         *
*                                         *
*       Patched and compile By RAED       *
*******************************************

Display More

Ncam working (

Code

root@dm920:~# /usr/bin/ncam
/usr/bin/ncam: /usr/lib/libcurl.so.4: no version information available (required by /usr/bin/ncam)

This is just warning message not problem

Code

/usr/bin/ncam: /usr/lib/libcurl.so.4: no version information available (required by /usr/bin/ncam)

I've tried both, ipk and bin files.

Perhaps is only problem for my box (vu+) .

But I solved it!

I've changed /usr/lib/libcurl.so.4.7.0 for the same file extracted from previous update. And now works ok.

libcurl.so.470 in last update has 376940 bytes and libcurl.so.470 from previous update has 376556 bytes.

Probably a openATV 7.0 compile problem for my box (vu+uno4k).

Thanks !

Display More

I've tried both, ipk and bin files.

Perhaps it's only problem for my box (vu+) .

But I solved it!

I've changed /usr/lib/libcurl.so.4.7.0 for the same file extracted from previous update. And now works ok.

libcurl.so.470 in last update has 376940 bytes and libcurl.so.470 from previous update has 376556 bytes.

Probably a openATV 7.0 compile problem for my box (vu+uno4k).

Thanks !

Quote from geisivi

I've tried both, ipk and bin files.

Perhaps it's only problem for my box (vu+) .

But I solved it!

I've changed /usr/lib/libcurl.so.4.7.0 for the same file extracted from previous update. And now works ok.

libcurl.so.470 in last update has 376940 bytes and libcurl.so.470 from previous update has 376556 bytes.

Probably a openATV 7.0 compile problem for my box (vu+uno4k).

Thanks !

Display More

for me too,doesnt work- dreambox 800 hd, open pli7.2

It works very well.

PC Windows 11