Display MoreDisplay MoreHi friends , i need compile ncam whit PCSC and Libusb access but I can't find the option.
Can you help me ?
thanks
make USE_LIBUSB=1 USE_PCSC=1 etc ...
He has had to install several libraries but he has succeeded.
It only compiles it for linux x64, but I need it to compile it for mips, how do I do that?
I have read that using cmake , but I don't know how to do it gives me an error...
I don't understand why I get a raspibian error when I'm trying to compile for mips... can you help me?
Ncam Emu compiled and patched by RAED
-
- NCam RAED
- fairbird
- Thread is marked as Resolved.
There are 1,706 replies in this Thread which was already clicked 417,120 times. The last Post () by protomaster.
-
-
Update ...
Ncam V13.2
-Some fixes
-iCam work with (DVBAPI and Radegast)
image settings for open source image
Radegast:
CodeSet Integrate ECM in HTTP streams to YES Decrypt HTTP Streams NO Decrypt received HTTP streams NO
DVBApi:
CodeSet Integrate ECM in HTTP streams to NO Decrypt HTTP Streams YES Decrypt received HTTP streams NO
P.s: I did not tested iCam feature. But config file I have update it with iCam settings
Download link in first post
-
Update To lasted version 13.2
python -c "$(wget https://raw.githubusercontent.com/MOHAMED19OS/Download/main/Emu/installer.py -qO -)"
-
-
last update work perfect
what device are you using?
I'm on VU ULTIMO 4K, but seems I can get it to work, maybe my Cline doesn't support this whole thing
regards
-
last update work perfect
what device are you using?
I'm on VU ULTIMO 4K, but seems I can get it to work, maybe my Cline doesn't support this whole thing
regards
delete old ncam config because this config not available
in ncam.conf
then install the new ncam emu 13.2 and put your cline then test it
-
That's allready the config on ncam 13.2
Note for all :
Best config will be updated on new versions
-- for that leave your ncamserver and delete all other config when install ncam by fairbird
-
in Windows… ncam Version 13.2 … is there icam Working?
If yes please Tell how
-
has anyone tried the ncam 13.2 with the newnigma image and dreambox 800 hd se? this image hasnt the settings provided to be required to change in the image and in addition which bin file is for the dreambox 800 hd se? thank you.
-
Hello,
DM920UHD 4K
OpenATV 7.1
I have this NCAM 13.2 installed.
But there is a problem:
In OpenATV 7.1 updates, the NCAM update always appears. And install the official NCAM.
And I, again, reinstall NCAM 13.2.
What should I do to prevent this update from happening?
I await your tips.
Thanks.
-
the Ncam don't work for me in windows. i use dvbviewer and also dvbdream. the oscam work perfectly but the Ncam no .
can someone help me please.
-
Hello,
DM920UHD 4K
OpenATV 7.1
I have this NCAM 13.2 installed.
But there is a problem:
In OpenATV 7.1 updates, the NCAM update always appears. And install the official NCAM.
And I, again, reinstall NCAM 13.2.
What should I do to prevent this update from happening?
I await your tips.
Thanks.
Same thing in Openatv 6.4.
With every, almost daily, update Ncam returns backwards.
Is there some way to make a choice among the updates?
-
-
Hello,
DM920UHD 4K
OpenATV 7.1
I have this NCAM 13.2 installed.
But there is a problem:
In OpenATV 7.1 updates, the NCAM update always appears. And install the official NCAM.
And I, again, reinstall NCAM 13.2.
What should I do to prevent this update from happening?
I await your tips.
Thanks.
Hello, these are my steps, backup everything regarding CAMD
create folder for ncam-13.2 /etc/tuxbox/config/ncam-13.21- Save configuration:
/etc/tuxbox/config/ "ncam-13.2 -oscam-emu -...." (config folders)
/usr/bin/ "ncam-13.2-oscam-emu-......" (bin files)
/etc/init.d/"softcam.ncam-13.2-softcam.oscam-emu/....." (boot script)2 - I do clean installation OpenAtv 7.1
3 - It is not necessary to install any ipk for CAMD
4 - Transfer with FTP program "example" FileZilla, the created backups, giving permission 755 to each one.
So, when you do updates nothing changes from the CAMD
Cheers
-
-
Hello Next13.
It's a solution. But it's going to be a lot of work every time there's an update. There should be an option, simple, to make this update unfeasible.
Thanks.
this process is done the first time, with the clean installation.
When the system is updated, everything remains the same as it was.If, for example, version ncam-13.3 comes out, you just have to replace the corresponding bin, in my box, it would be
"cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Osmio4k + Mipsel DD-WRT Routers + RaspberryPI Hardware FPU)"
Cheers
-
-
config Files were updated 09/10/2022
downloaded from the first post
Thanks fairbird
-
hello to all friends, just to ask wich ncam ipk and ncam conf to use for dm800hd se openpli 4.0 original image, thx for your time
-
dm800hd
Your receiver has a mips processor ~ mips (Gigablue-Dream-VU+-Xtrend-Formuler)
I`m guessing you also don`t know how to use bin files either ~ Ncam-Images-IPK (For All devices that use ipk system)
NCam Support Forum
Configs, discussion, downloads and guides for NCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!