GigaBlue 800seplus : OpenPLi 7.2Star 20200526 1.17.0.1

There are 21 replies in this Thread which was already clicked 2,897 times. The last Post () by toysoft.

    GigaBlue 800seplus : OpenPLi 7.2Star 20200526 1.17.0.1



    - OpenPLi 7.2Star by Japhar Team, May 26th 2020

    - Python 2.7.13

    - GStreamer 1.17.0.1

    - EPGImport Built-in

    - Feeds online (For Wifi/DVB-T Dongles)

    - DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)

    - Wifi Realtek, Ralink, Mediatek Supported

    - IPTV Support with Built-in

    1300 Free To Air FREE IPTV Channels from their broadcaster

    100+ VoD Free To Air Public Domain Movies and more coming soon (Charlot, Keaton, etc)

    - JAM 5.3 built-in (Plugins/Addons)

    - Support by Japhar Team


    Gb 800seplus :

    Code
    https://mega.nz/file/dF1j2Zxa#kmMgULztgn1Vx6Wnxsx6myU-ndVZfIZlqqkXGOH8bOM

  • emosim

    Set the Label from GigaBlue OpenPlus Images to GigaBlue OpenPLi Images

    This phenomenon is the same for all Gigablue boxes with the firmware.


    No problem with OpenATV, they have it under control ;)

    Try this one,


    7.3

    Code
    https://mega.nz/file/T3xhhYzI#rQ9mB5JSfMDGQpblXEPNRzP-0IGvrum94iyCbzEGFF0


    7.2

    Code
    https://mega.nz/file/0GRgUCAI#VrJ-SekGOuHuyaoh_0yGIRr4_FXEksf_mbqWubPN3_c


    TS

    Thank you very much, at least I now have two images that will most likely work in case my first deco goes bananas.


    I tried both images on the second deco I have but they don't work, show the typical green screen.
    This is very likely because the second deco has a hardware date of 2015 whilst my first deco is from 2018 and works with the mentioned image (of which I also found a full backup just yesterday).


    I have another 800 se+ deco coming my way so I will try these on that one hoping they will work, otherwise I'll probably purchase an 800 UE+ and flash the openpli 8.0 which I found here on the forum.


    The reason for all of this mess is because I use a customized Copper-FHD theme and want it on both deco's. This theme works only on 2018+ images as it uses some python stuff that won't work on earlier versions.



    I'll post my results here so you'll know.

    So after 3 days of trying more than 10 different images this afternoon I finally found one that works, OpenLD 2.9

    This is an image of Spanish origin LD standing for Lonas Digital and as it happens it's the image that came with the deco.


    What it didn't expect was that this image actually works with the custom theme I use and on top of that I also got it working with C**Cams 2.3.0

    Although some things are different from OpenPli, which I clearly would prefer, like not being able to download plugins or extensions, for the moment I can live with that. At least now I can use the deco in my living room. My dish setup consists of 3 quad LNB's so I could even setup another deco in my bedroom if at anytime I'd want to.


    I also bought the 800 UE+ and although this would not be the correct thread to post, I will post my results here when I receive the new 800 se+ and the 800 ue+ to have the complete picture of all this mess.


    ** to be continued **

    After installing the caminfo.ipk I modified the skin to show the right info.

    The result:


    IMG_20240921_103537.jpg


    Everything works as it should although this deco lags a bit more than my first one.


    The reason why I use this skin is because it actually shows all the relevant info in just one bar. I haven't found any skin that even comes close to this, if there's one that show it all it usually occupies much more screen space.


    This monday I will receive the third 800 se+ deco which also is a combo like the first one I have. I'll be posting my experiences with trying to flash openpli on that one.

    Later on during next week I should receive the 800 ue+, so more on that later.

    So yes, I received the third 800se+ deco today. And I've been busy trying it out.


    This one is the combo version and that was the main reason for me to buy it because the dvb-t tuner alone is worth double what I payed for the deco.

    It also came with very nice universal multi remote which works absolutely fine and that comes in handy for my bedroom as I can have just one remote for the deco and the tv.

    Now for the juicy part. It came with the openld 2.9, just as the second one, so I was a bit worried that it would be the same older hardware.

    So since I have the openld 2.9 image no need for a backup and the first thing I tried was


    openpli 7.2 from toysoft and guess what... It worked!


    next I tried my own image backup from the first deco, openpli 7.3 from 2020-05-26 and.... it also worked!


    So to top it off I tried the 7.3 20201205 from toysoft and... yep, it also worked and is currently the one I use.


    As you can see from the info below both decos have the exact same hardware date, which is what I hoped for and effectively got.



    deco42.jpg

    first deco (the good one)


    deco43.jpg

    the new third deco



    Now I could have gone wild and try the openpli 8.x for this deco, but... I found this post from toysoft here on the forum:



    93 Mb is too small to have v8.xStar, the compile without most of things is over 110 Mb.


    TS


    and I've noticed that this deco has less flash space than my first deco. I found that out while copying my skin and the ftp failed so I had to put the flash extender plugin in to be able to use my skin. It's probably a 128mb flash where as the first seems to have 256... very strange. I believe the 800ue+ has 256 so we'll see when it gets here.

    Depending on my experience with the ue I'll be deciding which one goes where but since I will have 4 while I only 3 I'll save one for backup, most likely the second one with the LD image.


    More to come...

    Although maybe few people will be interested in all of this, when I get help from someone I find it no more than appropriate and respectful to post the experiences whether they lead to failure or succes. It's what makes forums so valuable.

    So I bought the 800 UE+ but since yesterday was the last day for the seller to send the deco (which didn't happen), today I got a message from the sale platform stating the order was cancelled. This isn't the first time it happened to me as there seems to be quite a large number of sellers with little seriousness on this platform. Worst thing is I lost 10-12 days as I now I have to wait for the refund.


    I also found out the UE is basically the exact same as the SE except for the LCD display. At the beginning of this thread I found these posts:

    Quote from avr3

    Best Image. Unfortunately, the clock and channel number are not shown on the display. But only the number 100.

    Thanks

    Quote from teak-won-do

    This phenomenon is the same for all Gigablue boxes with the firmware.


    No problem with OpenATV, they have it under control ;)

    From my experiences with the three SE+ boxes I can tell this is NOT a firmware problem. All my three deco's have the same firmware and yet only my first deco is working correctly as for the display showing channel nr and time. The other two also show the 100. Even though the hardware date of the first and last deco are the same there clearly is a hardware difference (flash memory being bigger as I mentioned earlier) so I suspect the driver in the image for the display works only correctly for a specific hardware version. Maybe Gigablue used different display driver chips depending on the production availability?


    Thus, I suspect the same might happen on the UE+, display not being of much use.

    Now since the UE+ order is cancelled I found a UHD trio 4K for just 20€ more. Reason enough (more flash, more mem) for me to buy that one.

    I also checked out the thread on that deco here on the forum, seems to be far more interesting. Especially since toysoft also posted several openpli images which I will be glad to try with my skin. If you happen to have a 7.3 version I'm more than willing to give it a try as well.


    When I receive the deco I will finalize my posts here and transfer over to the GigaBlue TRIO 4K UHD my experiences with that deco.


    * to be continued *

    We cannot retroactively compile an older image (7.2) for your new Gigablue Trio 4k UHD, but I think the OpenPLi 8.xStar will fit it perfectly, you have it on the usual link,


    OpenPLi 8xStar IPTV - Our Dreambox World - Japhar Sim Forum - http://www.japhar.com/ - SuperSim3


    TS

    They do have develop versions as well, but I will be trying the 7.3 and your 8.x In fact I already have quite a list of images so there should one that works with the skin. And if some things are missing I can adjust the .xml files accordingly (I have done that several times already).

    Thx.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login