Dear Users Friends please help
how can i update my rescue loader
in 900 original
Rescue Loader update help for DM 900
- naveenkhan
- Thread is marked as Resolved.
There are 15 replies in this Thread which was already clicked 4,192 times. The last Post () by abu baniaz.
-
Go to :
-
Go to :
this is not the proper answer ....to upgrade rescue loader simply give/type the command in DCC/telnet ,press ENTER and then reboot
Codeupdate-rescue -v -
My rescue loader is version #103
Is the latest one? If not how, do I install the newest one please?
I have tried
Codeupdate-rescue -vCode
Display MoreWelcome to OpenViX for dm900 openvix 6.8 dm900 dm900 login: root root@dm900:~# update-rescue -v Warning: Could not read CA! Warning: Please consider updating your rescue loader! [*] Downloading 'http://dreamboxupdate.com/download/recovery/dm900/release/rescue-image-dm900.bin.sig' % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 310 100 310 0 0 4396 0 --:--:-- --:--:-- --:--:-- 4428 [*] Downloading 'http://dreamboxupdate.com/download/recovery/dm900/release/rescue-image-dm900.bin' % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 11.1M 100 11.1M 0 0 18.0M 0 --:--:-- --:--:-- --:--:-- 18.0M [*] Verifying signature of 'rescue-image-dm900.bin' gpgv: Signature made Mon 02 Dec 2019 21:50:15 GMT gpgv: using RSA key A8A58D40B77248097CFA0E2EF02A0F767DA27561 gpgv: Good signature from "Dreambox DM900 Recovery <dm900@recovery.dreambox.de>" [*] Writing rescue image to flash Warning: Could not read CA! Warning: Please consider updating your rescue loader! Manufacturer ID: c2 Memory type : 20 Memory density : 19 read id ok comparing 2846 sectors... nothing to do [*] Done. root@dm900:~# -
-
I have attached the file to your post instead of just a link.
How do I flash this recovery file please? I have booted into recovery mode and selected the file, but it says it's invalid.
-
hxxps://www.opena.tv/viewtopic.php?t=31682
latest:
wget http://www.dreamboxupdate.com/….14-r0-dm900-20201201.bin
-
I asked how I flash it, not from where I download it.
-
I have tried this
1. Copy this .bin to /tmp
2. Open telnet and login
3. flash-rescue /tmp/*.bin
4. Wait 3-5 minutes. Wait for DONE info!
5. Power OFF to 10 sec and power ON.
6. Done. You have new rescue loader.I fail at stage 1, it won't allow FTP while in recovery. Do I need to be booted into an operating image instead of recovery?
-
hxxps://www.opena.tv/viewtopic.php?t=31682
latest:
wget http://www.dreamboxupdate.com/….14-r0-dm900-20201201.bin
please latest dm920
thank you
-
The wget command did not like the https in the address
Coderoot@dm900:~# wget https://dreamboxupdate.com/opendreambox/2.5/stable/images/dm900/zImage-rescue-3.14-r0-dm900-20200715.bin Connecting to dreamboxupdate.com (178.63.252.154:443) wget: server returned error: HTTP/1.1 400 Bad RequestI thought I got it done by these commands while in recovery mode. It still says it is 103
Code
Display Moreroot@dm900:~# wget http://dreamboxupdate.com/opendreambox/2.5/stable/images/dm900/zImage-rescue-3.14-r0-dm900-20200715.bin Connecting to dreamboxupdate.com (178.63.252.154:80) zImage-rescue-3.14-r 100% |****************************************************************************************************************************************| 11384k 0:00:00 ETA root@dm900:~# flash-rescue zImage-rescue-3.14-r0-dm900-20200715.bin Manufacturer ID: c2 Memory type : 20 Memory density : 19 read id ok comparing 2847 sectors... erasing 2845 sectors... writing 45520 pages... verifying 2845 sectors... flash done root@dm900:~# reboot -
The rescue image is updated in normal operation. Not in rescue mode!
If the appropriate rescue image for your box is created via FTP in /tmp, enter this shortened command via telnet:
OE2.5 example: flash-rescue /tmp/zImage-rescue-*.bin
Then simply enter reboot in telnet or reboot the box.
-
Thanks. While in active ATV image, I transferred the file uploaded by hannibal_lecter. I then flashed it with the command you gave. It is still 103 after reboot.
Code
Display MoreWelcome to openATV for dm900 openatv 7.6.0 dm900 dm900 login: root Password: root@dm900:~# root@dm900:~# flash-rescue /tmp/zImage-rescue-*.bin Warning: Could not read CA! Warning: Please consider updating your rescue loader! Manufacturer ID: c2 Memory type : 20 Memory density : 19 read id ok comparing 2847 sectors... erasing 2844 sectors... writing 45504 pages... verifying 2844 sectors... flash done root@dm900:~# reboot -
I used this procedure to update my dm920 from #103 to #104 (latest available - not #105) without any problems. I've always had DreamOS images flashed, and I don't know if an Open image in the flash would be a problem.
The latest file for the dm900 is the one you'll find in the unstable firmware section (zImage-rescue-3.14-r0-dm900-20201201.bin). I don't know if that's the one you're trying to send.
-
Thanks. I flashed your attachment. I am now on recovery version 104.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
