hi there
Is there any chances in installing the satellites.xml back into the box ?
zgemma H9s
There are 16 replies in this Thread which was already clicked 2,729 times. The last Post () by Antepenultim8.
hi there
Is there any chances in installing the satellites.xml back into the box ?
zgemma H9s
not to sure what you are asking.
it lives in /etc/tuxbox
or etc/enigma2
By accident I’ve deleted the satellites from the wrong place , it was from etc folder now when I’ve turn the box on again it says that the satellites . Xml not found or corrupted, that means I’m unable to do the tuner configuration
Download it from http://satellites-xml.org/
and ftp it to /etc/tuxbox
if you update to latest settings
Enigma2 Settings and Satellites.xml
it will give you latest
satellites.xml
hi there
iv'e tried to FTP Satellites.xml in etc/tuxtbox but it dosen't accepts it or even to flash new image on it, it keeps saying ..image not valid . Its a new image from Openatv
for some reason it declines everything
here is my openatv satellites.xml file
delete any satellites.xml file that live in etc/enigma2
copy this one into etc/tuxbox
you might need to stop enigma2 if its not letting you copy over.
in telnet or putty
try
init 4
copy file over
init 3
and by new image ... is it openatv 6.5 - that is still in its alpha release. There will be bugs in that image as it is still in very early development
If latest openatv 6.4 you should be fine.
it’s doing the same when I’m trying to install any cams .
Do a full reflash, using the correct image and instructions. Sounds like you been faffing and broke things
http://images.mynonpublic.com/…/index.php?open=zgemmah9s
How to Flash Zgemma H9 Series 4K Linux Enigma2 Receivers
not really..I didn’t broke anything.. iv’e tried flashing a new image on it ,. Online flashing first.. kept saying invalid image ,then I tried with a USB stick following All the instructions And nothing .. and last iv’e tried installing Wooshbuild Infinity but it refuses to download the file .
Yes because by the sounds of it you have either installed the wrong image to start with, or something has broke which is unfixable.
So you need to reflash with the correct image. I gave a link to your box (if it is a h9s) above.
USBs can be funny on zgemmas. try a variety of different usb sticks. And try to use a proper branded one, not some cheap ebay usb.
you might even have to install 6.3 first, then do an over the air flash
not really..I didn’t broke anything.
Doesn't deleting a system file fall into the breaking category? The user file goes in /etc /enigma2 and will be used in preference to the system version.
Another option for you is to flash by command line
wget --no-check-certificate -O installatv.sh https://www.dropbox.com/s/nqbo698rxconave/installatv.sh?dl=1 && bash installatv.sh
P.S
I will be moving this thread out of softcams section
not really..I didn’t broke anything.. iv’e tried flashing a new image on it ,. Online flashing first.. kept saying invalid image ,then I tried with a
u tell me u the expert . After a few attempts to flash a new image on it .. now it is stuck on boot .
And the thing is I can’t get an IP address from the box ..
These Zgemma boxes crash so easily.
thanks for your help most appreciated
By accident I’ve deleted the satellites from the wrong place , it was from etc folder now when I’ve turn the box on again it says that the satellites . Xml not found or corrupted, that means I’m unable to do the tuner configuration
not really..I didn’t broke anything.. iv’e tried flashing a new image on it ,. Online flashing first.. kept saying invalid image ,then I tried with a
are you sure
run DCC
then telnet
init 4 && opkg update && opkg upgrade && init 6
it worked for me on Z7s
Hi there
Managed to install Openatv 6.4 image on my Zgemma H9s .. on DCC I’m not able to FTP on it as it says functionality limited ? Please log in and password ? just need to install Ccfg. Files on it
Any help please
Many thanks in advance
How to set FTP and SSH password on all OE-Alliance branch 4.4 enigma2 images
Menu
Setup
System
Network
Password Setup
Enter new password (with the TXT key you can use the virtual keyboard) Save with the green button
Don’t have an account yet? Register yourself now and be a part of our community!