Hi can this be fixed box stuck on red led not booting
Any one help please only got box
Ethank you
Zgemma h9 2h
There are 5 replies in this Thread which was already clicked 2,231 times. The last Post () by Rickythomaslfc.
Hi can this be fixed box stuck on red led not booting
Any one help please only got box
Ethank you
Zgemma h9 2h
Zgemma h9 boot from usb, when emmc lost all data, you can use same image, all files include
Use a USB stick with FAT32 format
Unpack the ZIP file to the USB stick
You should see a "zgemma" folder in the root of the USB stick.
Power off the receiver
Plug the USB stick to one of the back panel USB ports. Recommended to remove all other USB connected devices.
Power the receiver on whilst holding down the REAR RESET BUTTON
Once the front Air Digital display logo start to flash White/Red, release the rear reset button and wait, your receiver is now being flashed.
If successful the receiver will reboot it self after the flashing process has completed.
Remove USB stick
More details: Flashing, backup and restore settings on Zgemma H9 series
If not: H9S can't boot, can't be flashed...
Best of luck and do tell if you succeed...
also my box stuck only red light, usbb and other not booting zgemma star 2s
This is a common fault with zgemma boxes m8, use a good reputable usb stick and keep the memory low [ about 2gb...4gb ]
start off and do a low format on the stick before you put your image onto it and it should eventually install...
good luck
Got it sorted flashed openatv 6.3 worked
Thanks for reply...
Don’t have an account yet? Register yourself now and be a part of our community!