Hello dear friends. How can I flash os +mio4k plus? And how can I multi-boot after flashing?
How to flash and multiboot
-
- Image Flashing Support
- Linux_man
- Thread is marked as Resolved.
-
-
-
master G
Added the Label Image Flashing & Backup Support -
For example Flash Online with a ATV image:
HDD or USB Stick is obligate,then blu button/Software Manager/Flash Online/Download Image ATV 6.4 , with green button you can flash the Image and you want,you can save your actuell backup settings and then can you installed it with button 1 = Upgrate(Backup,Flash and restore All).
For Multiboot,copy via ftp your Multiboot Image zip under hdd/images,then blu button/Software Manager/Flash Online/Downloaded Images and flash it or under slot 2,slot 3 or slot 4.Slot 1 is only for Flash Images.
When you have flashed the Multiboot Image,you can start it under button Power long/Multi-boot .
FLASH ONLINE:
ccfaac4502c.jpgafe44170b7a2cc8136.jpg52b64301bea3c2.jpg8196f9579e5d5.jpg
MULTIBOOT:
-
I want to use pli image to download, there are two models. One is normal and the other is multi-boot. Which one should I download and I still do not understand how to flash the receiver?
-
Pli normal is for Flash and Multiboot is for Multiboot and what do you not understand to flash the receiver?
-
Pli normal is for Flash and Multiboot is for Multiboot and what do you not understand to flash the receiver?
Now there are two image models on the page below.
openpli-7.3-release-osmio4kplus-20201019_usb.zip
openpli-7.3-release-osmio4kplus-20201019_multiboot.zip
Which one should I use for the receiver? After flashing, I want to multi-boot.
I do not know how to flash or how to multi-boot
-
At first,witch image is on your receiver on Flash,ATV 6.3?Have you a usb stick or external HDD on your Receiver?What will you do with the PLi Image?Want you to install it as Flash Image or want to install it on Multiboot?If you will install the image as Flash image,you must take the first image,if you want to install it on Multiboot,you must take the PLi Multiboot Image.How to install in on Multiboot i have write it on my first posting here.
-
for those receivers, multiboot is a factory function, and not a plugin as older models...
you need to install first a full image (not a multiboot one) ,through usb/flash disk (there is a "how to" link above). this image will appear in "slot 1"
than you can use (not need to install something) three more slots, to install 3 more images. you can do it through internal installer, online flash, or offline .
for those 3 slots, you need to install the "multiboot" version of any image.
-
At first,witch image is on your receiver on Flash,ATV 6.3?Have you a usb stick or external HDD on your Receiver?What will you do with the PLi Image?Want you to install it as Flash Image or want to install it on Multiboot?If you will install the image as Flash image,you must take the first image,if you want to install it on Multiboot,you must take the PLi Multiboot Image.How to install in on Multiboot i have write it on my first posting here.
I want to install the pli image on the flash and multi-boot the rest of the images. Currently ATV 6.3 is installed on flash, but I want to change it and pli is on flash and ATV on usb as a multi-boot. I do not know how to change the flash image from ATV to Pli.
-
first of all, as i wrotte above, multiboot in this receiver, isn't plugin, and all images are in the flash.so does not matter which image is in slot1 /2/3/4 ...
if you still want to change the raw for any reason...
download the openpli image that you want. not the multiboot one, the "full"
unzip and place the folder in a fat32 formated usb stick
unplug the receiver from power supply an put the usb disk
plug the power supply and in the first screen message, press "ok" .
wait to finalize, and the receiver will reboot.
openpli will be in 1st slot of your receiver.
and a video how to
-
Thank you very much for the help of all of you my good friends.
-
PurE2 and how to flash RECOVERY and USB formats
In ZGemma H7 there is a Sticky thread of mine which explains further the difference between 2 types of flashing files...
-
Hello
Can I have the original factory image of Edision os mio+ 4k
I had to make a recovery becuase of a mistake I have done so when the device boots now it shows the bootlogo of the image on the first slot instead of Edision logo and I really want it back
I will aprreciate any help
thanks -
Edision OS MIO+ Plus 4K DVB-S2X + DVB-S2/T2/C (H.265/HEVC) Linux Enigma 2 Combo Tuner with Multistream, Blindscan Support, Dual Band Wi-Fi 5G/2.4G & OLED Display.
Download Edision OS MIO+ Plus 4K Images and Enigma2 Team Support from OpenATV - OpenBh - OpenDroid - OpenESi - OpenHDF - OpenPLi - OpenSPA - OpenViX - OpenVision - PurE2 - SatDreamGR
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!