OSCam Surprise.532-r797

Quote from jeepcook

Quote from amine2010

Hi Guys. OSCam_surprise.532-r797 where can i transfer this file and is it working for all images? i tried to ftp to usr/bin on opentav 6.4 (duo2 hd) but it does not show with the other emus. thanks

Hello,

What is your box architecture ? mips or arm 4k? transfer the bin to usr/bin is not enough to have the choise to execute this emu with the interface.

1st thing to do is to run in telnet /usr/bin/<name_of_your_binary> and see what's happpen

if it's ok, just install oscam-emu (use the last version) and replace the bin by yours.

Display More

my box architecture is mips. i have already the latest version of oscam, is it enough of shall i changed it or just install a new one. i do not the steps to do. thanks for your reply

Quote from amine2010

Quote from jeepcook

Quote from amine2010

Hi Guys. OSCam_surprise.532-r797 where can i transfer this file and is it working for all images? i tried to ftp to usr/bin on opentav 6.4 (duo2 hd) but it does not show with the other emus. thanks

Hello,

What is your box architecture ? mips or arm 4k? transfer the bin to usr/bin is not enough to have the choise to execute this emu with the interface.

1st thing to do is to run in telnet /usr/bin/<name_of_your_binary> and see what's happpen

if it's ok, just install oscam-emu (use the last version) and replace the bin by yours.

Display More

my box architecture is mips. i have already the latest version of oscam, is it enough of shall i changed it or just install a new one. i do not the steps to do. thanks for your reply

Display More

if you don't need oscam for other emus or card reader, replace the bin installed by the mips tntsat one, give it the same name, attrib 755 and restart emu

if it does not work run the command in my previous message

Quote from jeepcook

Try this command:

/usr/bin/oscam-surprise --config-dir /etc/tuxbox/config/Surprise --daemon --pidfile /tmp/surprise.pid --restart 2 --utf8

if screen stay black, just run /usr/bin/oscam-surprise to display messages.

I get this error

Quote from maneldascoubes

Quote from jeepcook

Try this command:

/usr/bin/oscam-surprise --config-dir /etc/tuxbox/config/Surprise --daemon --pidfile /tmp/surprise.pid --restart 2 --utf8

if screen stay black, just run /usr/bin/oscam-surprise to display messages.

I get this error

opkg install libusb-1.0-0

I can confirm oscam 4k tnt works on my Octagon SF8008 with openPLi 8. However i had to run the command ln -sf libcrypto.so.1.1 libcrypto.so.0.9.8 and then start oscam because openPLi uses libcrypto.so.1.1.

The only problem is that if i reboot the receiver i have to restart oscam again so as to open channels.

Quote from jeepcook

Quote from amine2010

Hi Guys. OSCam_surprise.532-r797 where can i transfer this file and is it working for all images? i tried to ftp to usr/bin on opentav 6.4 (duo2 hd) but it does not show with the other emus. thanks

Hello,

What is your box architecture ? mips or arm 4k? transfer the bin to usr/bin is not enough to have the choise to execute this emu with the interface.

1st thing to do is to run in telnet /usr/bin/<name_of_your_binary> and see what's happpen

if it's ok, just install oscam-emu (use the last version) and replace the bin by yours.

Display More

c2569b0.png

i did and got this error message

Quote from amine2010

Quote from jeepcook

Quote from amine2010

Hi Guys. OSCam_surprise.532-r797 where can i transfer this file and is it working for all images? i tried to ftp to usr/bin on opentav 6.4 (duo2 hd) but it does not show with the other emus. thanks

Hello,

What is your box architecture ? mips or arm 4k? transfer the bin to usr/bin is not enough to have the choise to execute this emu with the interface.

1st thing to do is to run in telnet /usr/bin/<name_of_your_binary> and see what's happpen

if it's ok, just install oscam-emu (use the last version) and replace the bin by yours.

Display More

c2569b0.png

i did and got this error message

Display More

Sorry try with chmod 755 in my previous message 775 was wrong

i tried it on BlackHole only with ipk file and it works perfectly. why it was not easy with OpenAtv?

Quote from jeepcook

Quote from maneldascoubes

Quote from jeepcook

Try this command:

/usr/bin/oscam-surprise --config-dir /etc/tuxbox/config/Surprise --daemon --pidfile /tmp/surprise.pid --restart 2 --utf8

if screen stay black, just run /usr/bin/oscam-surprise to display messages.

I get this error

opkg install libusb-1.0-0

Display More

Clear!

Thank you so much!

Quote from amine2010

i tried it on BlackHole only with ipk file and it works perfectly. why it was not easy with OpenAtv?

With OATV it's easy too.

for mips:

hello, having surfed a bit here: https://www.file-upload.net/download-14505013/Oscam-EMUmipselTNT.rar.html, well I took a while, on an old decoder seen, open fold 6 ferarri
1: installation of the 3 opk in surprise package,
2: telenet:
opkg install libusb-1.0-0

2: download, of an oscam-ému with download openpli enigma (receiver addon)
3: transformation of the name of the oscam, (oscam-emu)
4: dcc: send bin with dcc: usr: bin
5: dcc: send config files from oscam to tuXbox / config / oscamemu
restart of the machine at each operation
ok it works, a little time to wait for the first start.
here is if it can help you!

Quote from jeepcook

Quote from amine2010

i tried it on BlackHole only with ipk file and it works perfectly. why it was not easy with OpenAtv?

With OATV it's easy too.

i do not think so regarding all these steps i have to do without a result. with BH i only installed the ipk file.

file ipk ???

Quote from hoolman

Quote from maneldascoubes

Quote from jeepcook

Quote from maneldascoubes

Quote from enigma1969

Oscam EMU Mipsel arch for Tnt 19.2 E

by juli13

Works very well.

The problem is: for have tnt, I lose biss, tandberg and powervu :(

Display More

just run oscam-tntsat and oscam-emu (with powervu) separately, you will have 2 oscam process, don't forget to set pmt_mode to 6.

Display More

I dont Know how i can have 2 oscam-emu at the same time.

Now in my main image only have Oscam_11.685-r798 (Powervu, biss, tand works)

Via openmultiboot i have a 2nd image with this TNT emu running, but I would like to have everything working in one image.

Display More

*** On OpenPLI mips ***

Go to

/etc/init.d

Creat : softcam.SURPRISE (chmod 755) with the content below

*****************************************************

#!/bin/sh

case "$1" in

start)

ulimit -s 1024

/usr/bin/oscam-surprise --config-dir /etc/tuxbox/config/Surprise--daemon --pidfile /tmp/surprise.pid --restart 2 --utf8

/usr/bin/oscam --config-dir /etc/tuxbox/config/Oscam --daemon --pidfile /tmp/oscam.pid --restart 2 --utf8

;;

stop)

kill `cat /tmp/surprise.pid` 2> /dev/null

kill `cat /tmp/oscam.pid` 2> /dev/null

;;

restart|reload)

$0 stop

sleep 1

$0 start

;;

version)

echo "SURPRISE"

;;

info)

echo "SURPRISE"

;;

*)

echo "Usage: $0 start|stop|restart"

exit 1

;;

esac

exit 0

*****************************************************

Yellow : the direction of your bin files (chmod 755)

Red : the direction of your config files

Display More

Works in OpenAtv 6.4 too!

Is there a way to automatically switch from oscam-emu to surprise when I choose tnt channels?

(Autocam is that?) Cant find this plugin on openatv

Works also on 13° east Tnt france ?

Quote from altotre

Works also on 13° east Tnt france ?

No. Only 19.2 East.

oscam emu x64 version

- emu tntsat

nagra 1811 & 1819, conax, Viaccess 6, fransat options (add keys only).

please oscam works Orange Polska 13e, viaccess 5.0, black cards 0500@032A00..............dreambox.

Hi, i don't understand "dcc:" and the remane of Oscam-emu to Oscamemu.

Thanks