try use dvapi files with
P: 183D:000000
try use dvapi files with
P: 183D:000000
try use dvapi files with
If you check the configs he is now using you would notice that oscam.dvbapi already has that entry.
try use dvapi files with
If you check the configs he is now using you would notice that oscam.dvbapi already has that entry.
PRIORITY CAID? CARD?i use tivusat card and i have tis on oscam config
preferlocalcards = 2
on user
emmreassembly = 1
preferlocalcards = 2
on dvapi
P: 183D
maybe is help
The log shows it is choosing that CAID and oscam.dvbapi has the priority for it.
The log shows it is choosing that CAID and oscam.dvbapi has the priority for it.
YOUR config not include
ecmfmt = P: c:0p:s:d:i #ECM_L:l #CW=w HOP:j but like show log have this config!!
for show on log example
P: 183D:000000:0D4A:10CE:0000 #ECM_L:91 #CW=86D5E641143177BCC5C141C74B47CD5F HOP:00): found (129 ms) by tivusat - Rai 2 HD
maybe is not your cofig?
satpassion remove all contents of oscam.dvbapi then add P: 183D:000000
Restart oscam then show another log please.
satpassion remove all contents of oscam.dvbapi then add P: 183D:000000
Restart oscam then show another log please.
Unfortunately it still does not work.
However, if I go to the channel information bar I get this data:
CAM: Oscam, CAID: 183D, SOURCE: Local slot, USING: Tivusat, PID: 10CD, CHID: 0000, HOPS: 0, TIME: 0.133
The strange thing is that if I change channels and then return to the previous channel, all this information no longer appears because the card is no longer detected.
Display Moresatpassion remove all contents of oscam.dvbapi then add P: 183D:000000
Restart oscam then show another log please.
Unfortunately it still does not work.
However, if I go to the channel information bar I get this data:
CAM: Oscam, CAID: 183D, SOURCE: Local slot, USING: Tivusat, PID: 10CD, CHID: 0000, HOPS: 0, TIME: 0.133
The strange thing is that if I change channels and then return to the previous channel, all this information no longer appears because the card is no longer detected.
put all oscam files what use now and make full restart dreamelitte
Quote(reader) tivusat [internal] Error: no card is present in readerslot!
You should check the card is inserted properly. Possibly give the chip a clean.
Display MoreDisplay More[user = '378503'] satpassion [/ user] rimuove tutti i contenuti di oscam.dvbapi quindi aggiungi [tt] P: 183D: 000000 [/ tt]
Riavvia oscam quindi mostra un altro registro per favore.
Purtroppo ancora non funziona.
Tuttavia, se vado alla barra delle informazioni sul canale ottengo questi dati:
CAM: Oscam, CAID: 183D, FONTE: slot locale, USO: Tivusat, PID: 10CD, CHID: 0000, LUPPOLI: 0, TEMPO: 0,133
La cosa strana è che se cambio canale e poi torno al canale precedente, tutte queste informazioni non vengono più visualizzate perché la scheda non viene più rilevata.
metti tutti i file oscam che uso ora
You mean, that I have to attach them here?
Quote(reader) tivusat [internal] Error: no card is present in readerslot!
You should check the card is inserted properly. Possibly give the chip a clean.
Perhaps this writing came out because, to be on the safe side, I tried the card with the chip facing down as well as up.
Does the fact that this data appears on the channel information bar mean that oscam recognises the card?
all oscam files what you have in /etc/tuxbox/config/
if have cccam server delete ,leave only card server
You mean, that I have to attach them here?
The configs are working don`t change them for now.
There is an issue with the card slot, its not reading the card.
Move the card into the lower card slot and edit the device in oscam.server from device = /dev/sci0 to device = /dev/sci1
Restart oscam and give us another log.
Sorry, but I didn't understand where to put the card?
The dreambx 920 has 3 slots. In the first 2 slots you can put the cams and in the lower one only the card. Right?
I've always put the Tivusat card in the slot where only cards without cams go.
In the first 2 slots you can put the cams and in the lower one only the card. Right?
Sorry, i thought it has 2 card slots.
To be sure we are all on the same page use the attached configs.
All other configs must be removed first.
Again, provide another log.
on first log you have
reader) tivusat [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2021/03/19 11:23:01 2A766094 r (reader) tivusat [internal] Reader sci internal, detected box type: dm920
put all oscam files what you have on tuxbox and make one restart
Nei primi 2 slot puoi mettere le camme e in quello inferiore solo la scheda. Giusto?
Mi dispiace, pensavo avesse 2 slot per schede.
Per essere sicuri che siamo tutti sulla stessa pagina, usa le configurazioni allegate.
Tutte le altre configurazioni devono essere rimosse prima.
Di nuovo, fornisci un altro registro.
The situation has worsened because I no longer even see the card data in the channel information bar.
Display MoreNei primi 2 slot puoi mettere le camme e in quello inferiore solo la scheda. Giusto?
Mi dispiace, pensavo avesse 2 slot per schede.
Per essere sicuri che siamo tutti sulla stessa pagina, usa le configurazioni allegate.
Tutte le altre configurazioni devono essere rimosse prima.
Di nuovo, fornisci un altro registro.
The situation has worsened because I no longer even see the card data in the channel information bar.
your card is in corect place , put all config files ,and make one full rebot ,maybe change image new dreamelite with de extra ,have very stable oscam
Display MoreNei primi 2 slot puoi mettere le camme e in quello inferiore solo la scheda. Giusto?
Mi dispiace, pensavo avesse 2 slot per schede.
Per essere sicuri che siamo tutti sulla stessa pagina, usa le configurazioni allegate.
Tutte le altre configurazioni devono essere rimosse prima.
Di nuovo, fornisci un altro registro.
The situation has worsened because I no longer even see the card data in the channel information bar.
any succes?
A greeting,
I have the Dreambox DM920 and a Tivusat smart card (I think the first, the blue one).
Oscam installed on the receiver
I placed in the folder: / etc / tuxbox / config
the following files:
oscam.conf
oscam.server
oscam.user
Unfortunately I don't get any view of the channels.
Thank you in advance and I hope for your help.
Thank you in advance and I hope for your help.
An oscam log is required to provide any help.
A greeting,
I solved it by reactivating the smart card on the Tivusat website,
now works correctly with your files.
Thanks again everyone.
Don’t have an account yet? Register yourself now and be a part of our community!