Zgemma H9 Twin Red Light Only During Booting

Read through these mate

Flashing, backup and restore settings on Zgemma H9 series

Zgemma h9 2h stuck on red light

Power down the box with the switch at the rear or at the plug.

Press and hold the power button on the remote down and at the same time turn the power back on at the switch.

This should get you into recovery mode you may have to try the above a few times.

Try just a standard reflash first if it wont flash read on, no video guide.

Two guides nicked from elsewhere for the combo but same method bar files.

Also read this thread

Flashing, backup and restore settings on Zgemma H9 series

This is a basic guide to USB flash a local image zip file to the Zgemma H9 Combo.

User will require a USB stick formatted FAT32.

1) Download your chosen image.

2) Transfer the complete zip file to root of the USB stick. Do not unzip the file.

3) Power off the Zgemma H9 Combo and connect the USB stick front USB port behind front flap.

4) Power on the Zgemma H9 Combo, as soon as you power on HOLD DOWN TOP LEFT POWER BUTTON on the remote.

5) Once you're booted into the Multiboot recovery menu screen below select 'Bootmenu' at the bottom and press OK on the remote.

6) On the next screen select 'Flash local image' and press OK on the remote.

7) On the next screen you select the USB stick where your image zip file is located.

8) On the next screen you'll then select the zip file that's on your USB stick that you'd like to flash and press OK on the remote.

9) You'll now select which slot you'd like to flash your image to. Remember which slot you are currently booting from and have setup. Flashing to that slot
WILL REFLASH that slot, you will loose everything you have setup in that slot. We have setup OpenViX in Slot 1, for this guide we are re-flashing OpenViX in slot 1, OpenATV 6.2 is in slot 2 and we have OpenPLi already flashed to slot 3. Select Slot 1 and press ok on the remote.

10) Once completed you can select which image you'd like to boot into and press ok on the remote.

Guide how USB flash the Zgemma H9 Combo multiboot recovery menu.



Note the recovery menu does not need to be re-flashed unless you have an issue or theres an update. Recovery zip files are released with every image build, but please note you DO NOT have to re-flash or update the recovery menu unless needed.

At the time of writing this guide re-flashing the recovery menu is not removing or affecting the installed images. Note this could change in a future update cause you to loose of the images you have installed and setup.

Zgemma H9 Combo purchased from World-of-Satellite.co.uk will have the latest Multiboot recovery menu pre-flashed at time of purchasing. The current latest revision is bootmenu r245.

1) Download latest recovery menu from OpenViX, OpenATV or wherever you wish to download from. Can be download from OpenViX downloads HERE. At time of writing this guide latest zip release is 'openvix-5.2.043.release-zgemmah9combo_recovery_emmc.zip', again you DO NOT have to re-flash or update this Multiboot recovery menu with every release.

2) Unzip the file to your desktop. You will have the following files:

'h9combo' directory

recovery_zgemmah9combo_lies.mich

recovery_zgemmah9combo_READ.me

bootargs.bin

fastboot.bin

3) Format a USB stick MAX 8GB FAT32.

4) Copy all the files and 'h9combo' folder to root of USB stick.

5) Power off the Zgemma H9 Combo.

6) Connect USB stick to front USB 2.0 port, behind front flap.

7) Press rear RESET reset button.

8) Power on whilst holding down reset button. Keep holding down the RESET button until FLSH appears on front display.

9) Be paitient, once successful the Zgemma H9 Combo will reboot into the recovery menu.

10) You'll see various options, to not go off topic simply select 'Boot 1. LINUX_1' to boot into the image installed into slot 1. Screen will look similar as below, note you can see the revision number bottom left corner.

. forumdaki tüm yayınları yaptım, tekrar işe yaramadı, sadece yeşil ışık yanıyor. Isınma soğutmasında bir sorun olduğunu düşünüyorum, cihaz hiç ısınmıyor.forumdaki tüm yayınları yaptım, tekrar işe yaramadı, sadece yeşil ışık yanıyor. Isınma soğutmasında bir sorun olduğunu düşünüyorum, cihaz hiç ısınmıyor.

i did all the posts on the forum, it didn't work again, only the green light is on. I think there's something wrong with the warm-up cooling, the device doesn't heat up at all., my device zgemma h9 twin stayed in the same light, the led panel does not work, the device also does not warm up, thank you very much in advance for those who will help.

l dont work zgemma h9s se, l think hitool, ıs there to use hitool? thanks.

the flash of the zgemma h9 twin device is defective, does anyone have a solution proposal? thanks.