Flashing problem Amiko Viper 4K V30

I tried with telnet but it does not connect it remains blocked on E2 but without internet connection. Can you revive with rs232?

Please me telnet login and Password fabrika---------viper4kv30, help me.............? image openatv 7.0.

error tuner , telnet information : login viper4kv30 incorect....................?

Quote from wiertolot

. . . login viper4kv30 incorect....................?

If you haven't changed your password yet, try root by leaving the password line blank and press enter

not login root..........

information telnet: viper4kv30 login incorrect....

i am not my password, new fabrikue tuner shop, gwaranty, not instruction.........

but, at the login request, do you get there?

telnet login: root, password: ........

login incorrect..............

Ok.

At the prompt, type root and hit enter.

Then, at the prompt where it asks for your password, hit enter.

After what happens?

viper4kv30 login incorrect..........and hung up telnet. I am openatv 7.0.

Strange,

also because even if you type the password wrong it should return to the login request and not close telnet

good new image usb, viper4kv30? and net............?

why not change your passwort like master G wrote: #post24

Menu > Setup > Network > Password > Choose your password > Green (Save) reboot ready

Safety is important to us

Important information we want to deactivate the root account at the beta image!

This means you have no access after the installation.

If you need access, you must set the root password afterwards

Access via Telnet / FTP / SSH is possible.

The root password can be set via the menu:

Menu Setup System Network Password Setup Enter new password (with the TXT key you can use the virtual keyboard) Save with the green button

6bd320e8c3f32a3392.png

1eda4d061f3eaf562415.png

ee0a3eca92d.png

a5944e.png

f156615547e493999861a9.png

You can log in without having to restart the box.

Empty password is not allowed through the GUI.

Tip : Settings backup so back up the password so that the password does not have to be set to each time.

thx to Captain of the OpenATV Team

Ok thnks, very good, i am instal new openatv in works telnet, ftp and not error change password.

Thanks.

Not booting usb and not usb image. Only instal new image on-line

Try this : https://mega.nz/file/XsERzTbB#…_6lfRTpwsSaiirrev-8K4pJ5o

- Unpack the archive , put it on a fat32 usb stick !

- power off , insert stick

- power-on with GREEN pressed some 10s

help please, i have the same problem lice LucarioShiny

I tried to flash a new image then, but I can't flash anymore. On boot I press green button, the word UPDT appears, but nothing happens.

Can someone help me?

Did you unpacked the archive file ?

Your memory stick is formatted FAT32 ?

I have done

- formatted usb FAT32

- and unpacked the archive file

nothing happens