I tried with telnet but it does not connect it remains blocked on E2 but without internet connection. Can you revive with rs232?
Flashing problem Amiko Viper 4K V30
- LucarioShiny
- Thread is marked as Resolved.
-
-
-
Please me telnet login and Password fabrika---------viper4kv30, help me.............? image openatv 7.0.
-
please telnet login and pass viper4kv30, help me.............? image openatv 7.0.
What is the password for ftp? username root but couldn't find password.
Setup your own password in Menu > Setup > Network > Password > Choose your password > Green (Save) or with telnet command passwd
-
error tuner , telnet information : login viper4kv30 incorect....................?
-
. . . login viper4kv30 incorect....................?
If you haven't changed your password yet, try root by leaving the password line blank and press enter
-
not login root..........
information telnet: viper4kv30 login incorrect....
i am not my password, new fabrikue tuner shop, gwaranty, not instruction.........
-
but, at the login request, do you get there?
-
telnet login: root, password: ........
login incorrect..............
-
Ok.
At the prompt, type root and hit enter.
Then, at the prompt where it asks for your password, hit enter.
After what happens?
-
viper4kv30 login incorrect..........and hung up telnet. I am openatv 7.0.
-
Strange,
also because even if you type the password wrong it should return to the login request and not close telnet
-
good new image usb, viper4kv30? and net............?
-
-
Safety is important to us
Important information we want to deactivate the root account at the beta image!
This means you have no access after the installation.If you need access, you must set the root password afterwards
Access via Telnet / FTP / SSH is possible.
The root password can be set via the menu:
Menu Setup System Network Password Setup Enter new password (with the TXT key you can use the virtual keyboard) Save with the green button
You can log in without having to restart the box.Empty password is not allowed through the GUI.
Tip : Settings backup so back up the password so that the password does not have to be set to each time.thx to Captain of the OpenATV Team
-
Ok thnks, very good, i am instal new openatv in works telnet, ftp and not error change password.
Thanks.
Not booting usb and not usb image. Only instal new image on-line
-
Try this : https://mega.nz/file/XsERzTbB#…_6lfRTpwsSaiirrev-8K4pJ5o
- Unpack the archive , put it on a fat32 usb stick !
- power off , insert stick
- power-on with GREEN pressed some 10s
-
help please, i have the same problem lice LucarioShiny
I tried to flash a new image then, but I can't flash anymore. On boot I press green button, the word UPDT appears, but nothing happens.
Can someone help me?
-
Did you unpacked the archive file ?
Your memory stick is formatted FAT32 ?
-
I have done
- formatted usb FAT32
- and unpacked the archive file
nothing happens
Amiko Viper 4K UHD Linux Enigma 2 2160p H.265 HEVC Multi-Stream DVB-S2X & DVB-C/T2 Combo Receiver
Download Amiko Firmware & Images. Enigma2 Team Support from OpenATV, OpenHDF, OpenPLi, OpenSPA, OpenViX, Open Vision & PurE2.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!