oscam fransat tntsat

There are 165 replies in this Thread which was already clicked 49,736 times. The last Post () by bigapple.

    Quote from lorrain

    I too have a PC7 which works perfectly with Oscam on the Openpli 9 image from my Vu+ Duo 4K SE.


    I'm looking for how to activate a new one with Oscam.

    Hi, could you please share your setup? I cannot get mine to work.


    Thank you.

    I answer to myself.


    In fact my Oscam configuration activates the new cards.


    I didn't know or I had forgotten.

    Hello,


    I'm putting my Vu+ Solo2 back into service with the OpenPli image.

    I want to switch to Fransat, my satellite dish is correctly oriented and the image is installed.

    And I've ordered my Fransat card and module (but haven't received them yet).

    But I think the module won't help me, is that the case? Do I have to go via Oscam?


    It's been years since I've handled or installed this and I'm not young anymore.


    In the plugins/softcam available from the OpenPli image, I see two oscam: 10671 and oscam.emu 10673.

    I've installed the both

    Then in /etc/tuxbox/config/oscam I have 6 files :

    oscam.conf

    oscam.dvbapi

    oscam.provid

    oscam.server

    oscam.srvid

    oscam.user


    and in directory /etc/init.d I have the file: softcam.oscam

    and in directory/usr/bin I have the file oscam in attribute 755


    I n my browser I've tested 192.168.0.149:5000 it works
    So I guess my oscam is running.
    Now, I'm looking for the configurations of the files (oscam, softcam.oscam, and others ...) to have Fransat with my future card
    Can someone help me and send me (perhaps by mp) the oscam files so that I can test them?


    If I need to change images (i.e. not OpenPli), I'll change it, and also for the oscam version, let me know please

    Thank you.



    Michel

    Edited once, last by MichelVn ().

    Quote from lorrain
    Quote from MichelVn

    In the plugins/softcam available from the OpenPli image, I see two oscam: 10671 and oscam.emu 10673.

    There is a problem because on OpenPli 9, Oscam is 11764 at the moment.

    Indeed, I've checked and I see (via 192.168.0.149:5000) OSCam: 1.30 Build: r11764@344ea3ee
    Can I suppose that's ok ?
    So now, I'm looking for the configurations of the files (oscam.server, and others ...) to have Fransat with my future card

    Can someone help me and send me the oscam files so that I can test them?

    Edited 2 times, last by MichelVn ().

    Hello,


    Look in page 1 and copy this in oscam.server :

    [reader]

    label = FRANSAT_V6/V7

    protocol = internal

    device = /dev/sci0

    autospeed = 0

    caid = 0500

    detect = cd

    mhz = 357

    cardmhz = 357

    ident = 0500:041950,041960,041970,041980

    aeskeys = 0500@041950:BFB57F9F75D3430E0C047607D620CA44;0500@041960:BFB57F9F75D3430E0C047607D620CA44;0500@041970:BFB57F9F75D3430E0C047607D620CA44;0500@041980:BFB57F9F75D3430E0C047607D620CA44

    group = 1

    emmcache = 1,3,15,0

    blockemm-unknown = 1

    blockemm-u = 1

    blockemm-s = 1

    blockemm-g = 1

    disablecrccws = 1

    read_old_classes = 0

    Hey guys,


    Does anybody have France 2 UHD that works at the moment?

    And with the option of recording the mentioned channel?


    Would you please be kind to help, I have created a separate topic as well:

    Thread
    Does anyone have FRANCE UHD (FRANSAT UHD)
    Is there anyone that has access to France 2 UHD channel?
    Possibly with the option of recording?

    If anybody could help, this would be amazing. I would have a question via PM.
    The bitrate of test phase was 16 Mbit, does anybody know is the bitrate now the same?

    I have asked admin for permission regarding my post and got confirmation and I want to thank master G for his extreme kindness and support.

    0
    Zer0lll


    Hopefully, someone might be able to respond and I want to thank you all in the kindest way for your time.


    0

    Works but no UHD at home

    Edited once, last by master G: Merged a post created by lorrain into this post. ().

    • Official Post

    A friendly reminder, yet again, this is the ENGLISH SECTION

    all non English posts have been deleted.

    Simply use google translate or the French section is you cant be bothered to post in English.

    Sorry guys for the french, I thought it was ok due to the topic being focused on french channel issue.

    I am switching back to english and hope to get some help.


    I have all the official material for fransat, module and pc7 card but my tv has no pcmcia port. So I bought a telefunken s9130 to handle it and it works fine but no hdr, colors are washed for fr2 uhd and fr3 uhd.

    I also have a vu+ zero 4k and I would like some support from the team here to be able to read those channels on it, far better image color sound...

    I understqnd it but never configured CAM myself and don't know if the private keys are really private (1 per customer) or it is an expression.


    Thanks again, available in MP if it should be that way.I could them post here the results of successful to help the community.

    For you information, since Oscam version 11800, it's possible to receive EMM's to activate ETB channels, for example.


    Thanks

Your resource for OSCam softcam

Find configs, downloads, tutorials, and support for setting up and optimizing this open-source card server with wide protocol compatibility. Master the versatile OSCam softcam. Access support, configs, tutorials, and downloads for open-source card sharing and multi-protocol server management.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login