heres a very basic guide for the above box
I have done this quickly and off memory so any mistakes please feel free to correct and re-upload
Get Team Red image
( Team RED E2 Image 17.02.2012 HD800 SE )
Open the rar file you have just downloaded - You will see 2 other rar files named - PreFlash and Finish.
First double click to Preflash and extract the 2 files straight to a clean USB pen then with the gigablue switched off connect usb pen to box and power on the box and wait until its flashing has finished this one usually take a few seconds.
Switch box off and removed usb pen connect to computer and delete preflash files off the pen and unrar the 3 files inside the FINISH folder to USB pen and same as above with the gigablue switched off connect usb pen to box and power on the box and wait until its flashing has finished only this time it'll take a few minutes it will reboot itself.
--------------------------------------------------------------------------------
Run through the setup usual bah bah this bit you can do and setup the internet connection.
Download Vu+ control center ( VuCC VU+ Control Centre Version )
Double click on VUCC.exe (leave this opened we'll get back to it)
Press Menu, Setup, Network and then adaptor settings you should be able to see the box's IP address Enter this where it says IP address on VUCC program
IP Address: 192.168.*.*
User: root
pass: leave blank
Then hit connect.
again leave this and we'll install CCCAM onto box....
get this file Extra URL Uploader
Enter your boxs IP Adress and click OK once this is done a box will appear telling to its done, once done close it.
-----------------------------------------------------------
Search for DreamboxUK Frontend and download it this is your ch bouquets - its a smart program that sets channels the way you want it and downloads them to box. Again using ip address and user and pass.
-----------------------------------------------------------
Next up.... Entering you c line if you have one
Goto VUCC
hit FTP
this will bring up files on your box on right hand side.
Navigate to /Var/ETC you will see a file called CCCAM.cfg move this to desktop and open it, Delete anything thats in and enter your C:line and save and put it back into /Var/Etc.
Now goto your box, by this stage you be able to see BBC1.
next....
Double press RED button this should bring up the downloads menu and you should see extra.url or something like it goto it and install CCCam 2.2.1.
Press exit to take you back to prevous screen and set softcam to cccam 2.2.1 and hit OK.
