There are 14 replies in this Thread which was already clicked 8,057 times. The last Post () by John_doe123.
USB only updates for all the Amiko Mira-X range (regardless of model) are few and far between. That's not to say they don't exist at all and they are not top secret or anything like that but generally they are not made public because they will be test firmware for something or other and then if to be released will be made available as an online update directly on the box itself either in the regular release or beta sections of the Upgrade menu depending on the type of update rather than given out as a USB update.
I do however have USB recovery firmware, this should only be used where the box will no longer fully boot up where it stays stuck on boot on the front display and no picture on screen or only boot logo etc. This is very easy to use BUT please just note it will erase all existing settings and return it to a factory state which when complete you can online update again to get you back to the latest version firmware.
There are two versions of recovery firmware, one for all Mira-X 4K models and one for all Mira-X non-4K models, you can download here:
Mira-X 4K: https://mega.nz/file/AVxFiYIR#khOT8d6sHu1o_SNLiJNeXbW2vA5qK9BJJDUihRMyzeUMira-X non-4K: https://mega.nz/file/oAgRXQDJ#EoHAxQZ5dIo76yYKlz0vD7LT9xlNN4jXaQx04GYN5CoHere is the readme text guide which comes with the above firmware:
1.Copy hi430_force_nand.xml and nand_image to the USB root disk.
2.Insert the USB then power on stb, when you see front panel show "ENd", unplug USB then reboot the stb.
3.After recover,need delete the hi430_force_nand.xml file in the usb,if not,when you reboot stb,will recover again.
Notice: After recovery,the box will be restored to an unsold state, the database including portal settings will be cleared.
Good evening, can somebody share again the firmware please?
I need for Mira X-4200
The file you are trying to download is no longer available
who can help me with force_nand.xm for Amiko Mira X HiS- 500 how to delete a forgotten password Mira x-2000
Waar kan ik software downloaden met oscam voor de amiko his-4300
Mg Gerard35
Waar kan ik software downloaden met oscam voor de amiko his-4300
Mg Gerard35
Is this firmware for the Mira x 4200 still somewhere available? Box is stuck on boot
Can somebody share again the recovery firmware for his-4300 non-4K.
Thanks.
Try this recovery ...
Try this recovery ...
hello, do you have the recovery firmware for the 4k version for his-4300? Thank you!
NO ! there is no public recovery image for 4300 !
NO ! there is no public recovery image for 4300 !
noted - is there nothing I can do? I am getting the same error as the OP. Thanks.
