thanks a lot mate for your help
but everything is fine according to server.
i am really puzzled
There are 42 replies in this Thread which was already clicked 4,780 times. The last Post () by ahmed gazye.
thanks a lot mate for your help
but everything is fine according to server.
i am really puzzled
but everything is fine according to server.
Strange that it was working and you changed nothing from your side.
The only other thing you can try is another version of oscam or try a different softcam like CCcam.
which ones can you recommend me, master G
which ones can you recommend me, master G
Use something from the official softcam feed that was posted above #5
ok thanks again for your patience
but i´ve tried earlier, it didn´t go
thanks again master G for your help.
The line is only working with a cccam 2.3.9 but unfortunately with freezes every 15 sec. How can l get the same config in oscam ? But first of all l give it a try with the 11711 later on.
Thanks again
it is really doomed, the oscam ist installed and nothing happened, i can't even access the oscam webif with the oscam config.
Am i missing something in here?
The line is only working with a cccam 2.3.9 but unfortunately with freezes every 15 sec. How can l get the same config in oscam ?
The oscam i linked allows you to add the C line in CCcam.cfg. Find it in /etc/tuxbox/config with the rest of the oscam configs.
i can't even access the oscam webif with the oscam config.
Did you add your own oscam.conf or use the default that came with the oscam i linked? The default webif port is 8888
You should be installing the oscam i linked with the telnet command method provided on that page, that way you can see if it installs or fails.
Display MoreThe oscam i linked allows you to add the C line in CCcam.cfg. Find it in /etc/tuxbox/config with the rest of the oscam configs.
yes i did. What about cccam prio, provider...
Did you add your own oscam.conf or use the default that came with the oscam i linked? The default webif port is 8888
You should be installing the oscam i linked with the telnet command method provided on that page, that way you can see if it installs or fails.
i used the one that came along the oscam 11711. i don't know how to add an oscam config as client. Now the cccam doens't work
Quote from fifi don't know how to add an oscam config as client
Convert C line to a Reader, then add it to oscam.server. You won`t need to edit any of the other configs.
CCcam prio/provider are not required, add C line to CCcam.cfg, that`s all.
appreciated, thanks a lot
i will try it
As matter fact that i couldn't handle the 11711, there is oscamopenbif access with oscam 11691-798 but still dark. What gonna happen if i replace this oscam binary with the 11711?
proxies and client are there but live log is still the same like yesterday
there is oscamopenbif access with oscam 11691-798 but still dark. What gonna happen if i replace this oscam binary with the 11711?
Replacing the binary will just downgrade oscam.
proxies and client are there but live log is still the same like yesterday
The server also freezes with CCcam and a different version of oscam which again points to this all being a server problem, regardless of what they told you.
By the way i can't convert the cccam cfg to oscam server. ' Convert to oscam' shows no effect by clicking on it
By the way i can't convert the cccam cfg to oscam server. ' Convert to oscam' shows no effect by clicking on it
Paste C line into top box
Click "Convert To Oscam"
Copy Reader from bottom box into oscam.server in /etc/tuxbox/config
The server also freezes with CCcam and a different version of oscam which again points to this all being a server problem, regardless of what they told you.
ok, Then i'm gonna wrap it up for today, thanks for your time and the support master G
Cheers
dear, my bro AhmedGazye softcam after install (oscam, ncam , cccam, gbox ) don't work and don't open any channel
Brother Ahmed harira, you need to take this file ( pti ) lib//Modules//extra//pti//pti.ko - from an image ( Pure2 ) Others have the software camera working on it, and it will work, good luck to you brother
For those who is facing a problem in run the encrypted channels on this image
Add file pti.ko to /lib/modules/2.6.32.71_stm24_0217/extra/pti
Which version of your device does the encrypted channels work on
It is better to add a file pti.ko you are not working on the version as long as you are working on the external flash and you are on any another version go to
media / hdd or usb( Depending on the plug you are using)
You will find the copies installed on the external flash all
Go to the name of the version, then
/lib/modules/2.6.32.71_stm24_0217/extra/pti
This method is safer to avoid problems
Hey,
my congratulations! It is working very well so far and finally also "SatPI"-Server on OATV6.4 is working for encrypted channels with this verison! - Time stamp is also correct!
But my issue is now, that i installed newest oscam and get keys, but no picture on the TV. My log saids "decoded" as usual, but it is not showing any picture on the screen.
Could you please help?
Don’t have an account yet? Register yourself now and be a part of our community!