Watching channels from different transponders - two tuners - motorized dish

H7S on Alsat Superior Dark Motor with 80 cm mesh dish, running pure2 v6.2-002

Very old image but apart from issue below it does all I need it to (hence did not update)

Quad output LNB on a motor. One cable goes to TunerA via motor, second to TunerB direct

TunerA = positioner

TunerB = second cable from ...

Can watch/stream any single channel with no issue.

Can watch on tuner A but then can only stream on tuner B any channel from the same transponder of the A channel.

Should I be able to stream any OTHER channel (from same satellite ofcourse)

Thanks

sebus

Nobody?

With Tune B = Equal to Tuner A

I only get attempted movement from same to same satellite and it never locks on the signal

Quote from georgeflu

Quote

TunerA = positioner

TunerB = second cable from ... ????

from tuner A or from satellite???

i think your problem is in the tuner2 setup (cable from... except if it is something else)

try to change the tuner 2 setup to "advanced" and add all your satellites . than just try to stream any channels from the same (to tuner A selected) satellite...

Display More

Still exactly the same, only channels from same transponder

Nobody any more ideas? Can somebody actually confirm it working?

Eventually got round to doing it, installed PurE2 latest: zgemmah7-PurE2-7.3-20230818_multi to Slot2

The behaviour is EXACTLY the same, I can watch a channel on TV & stream another to PC ONLY if they both come from same transponder

If they are on different transponders only the first channel wins (whichever one was accessed first, either on TV or via stream)

I have not tried other images yet

Debug log attached (configured debug logging, restarted UI, accessed one channel on TV, tried to stream another from VLC on PC which ofcourse failed)

sebus

Anybody at all has any ideas?

Whats coul I draw?

4 way LNB, 1 direct cable goes to tuner A, second direct cable goes to tuner B

H7S has only a single port per each tuner, so impossible to connect in any other way

Tuner A = USALS

Tuner B = Second cable from motorized LNB

There are no settings for power anywhere I can see

Pure2 updated to latest

Do not fancy another image

The above image is irrelevant (I have single LNB with multiple outputs)

Anybody?

What can I draw, honestly?

4 output universal quad LNB on motorized dish (2 outputs used), 1 direct cable to each tuner inside H7S

LNB out 1 -----> tuner A

LNB out 2 -----> tuner B

LNB out 3 -----> nothing

LNB out 4 -----> nothing

I already have latest image (none of the Pure2 did work previously, so do not expect anybody to fix anything, maybe just being pesymistic)