AJPanel Enigma2 Tools - discussion & support

There are 1,333 replies in this Thread which was already clicked 296,280 times. The last Post () by muhnnad.

    Al3arab

    Yes, I saw your very helpful post. Thank you for that. I will do it in future as you described. But I find giorbak 's request to add a "Stop Current Service and exit AJPanel in the Player-bar Options and go back to the last open TV channel" to be a good idea and very useful. Hopefully it will be integrated in future releases. Until then your advice is a good workaround. Thank you for that again! ;)

    Quote from giorbak
    Quote from bananenmann

    How can I quickly change from watching a IPTV-stream (TV, VOD, Series) back to normal TV-Mode on my receiver? (SAT or Cable).


    I had requested a long time ago to add an option titled "Stop Current Service and exit AJPanel" in the "Player-bar Options" and go back to the last open TV channel, however, no action was taken.


    1.jpg


    Quote from bananenmann

    Al3arab

    Yes, I saw your very helpful post. Thank you for that. I will do it in future as you described. But I find giorbak 's request to add a "Stop Current Service and exit AJPanel in the Player-bar Options and go back to the last open TV channel" to be a good idea and very useful. Hopefully it will be integrated in future releases. Until then your advice is a good workaround. Thank you for that again! ;)


    Something similar will be added to the next update.

    I would like to apologize for my post #1,097 because when I requested the option "Stop Current Service and exit Ajpanel" it was not transferred to the last TV channel

    but to the channel list and the cursor was going to the first channel in the list. Now that it's transferred to the last watched TV channel, it can easily be done.

    As you mentioned, we will have something similar in the next version.

    Thanks

    It would be helpful if you allowed the user to choose the layout of the arrow keys by swapping them.

    Besides, enigma2 offers this possibility.


    An option for the layout of the arrow keys (enigma2 or neutrino) could be added to the AJPanel settings.

    If the user selects the enigma2 layout, the channels will be changed using the Left-Right keys.

    In this case, the Up-Down keys could be used to open the channel list, allowing the user to scroll up and down depending on the button that opened it.

    Thank you for this great plugin.

    I have a question: I can not find the option to play streams, which I have in a xml-file. Is there a way to play them?

    VU+ Uno 4K with VTI 14.0.5 and OpenATV 6.4

    Edision OS mini with OpenHDF 6.4

    Quote from Panther-6

    Thank you for this great plugin.

    I have a question: I can not find the option to play streams, which I have in a xml-file. Is there a way to play them?

    AJPanel have 3 type to deal with

    - Portals: as have file with word on file name portal and that file contain host, mac

    - Playlist: as have file with word on file name playlist and that file contain iptv link by host, port, user, pass

    - M3u, M3u8: extensions file

    Bro Biko

    I need emil panel ipk for VUUNO4KSE OPENPLI 9.1 EGAMI 10.6

    SHUKRAN BRO

    TAKE CARE

    Quote from giorbak

    I asked before, but I didn't get a reply, so I'm asking again.


    In the "Upgradable Packages" window, there is only the option of upgrading the package on the cursor.

    Can be added an option to upgrade "Selected Packages" and/or "All Packages" with one click?

    Updating all packages is already available in all images.


    Please note that all suggestions are documented.

    Hi together, i have the AJPanel installed on a Dream 900 UHD and the Image is an NewNigma2. I would make on the console a update from my dream but when i make this i have a mistake like this:


    biko: What can i do? is my Image with your newest plugin version now dead and i must flashin new?

    About an answer thanks a lot

    Quote from Warder

    @Hanebambel - just restart it and it should start up again and with the latest version of AJPanel

    thx for your answer, but now i have the 10.6.0 installed but after a reboot an connecting to the box with putty this is coming again:

    :-(


    EDIT: Sorry, can you please move my post to the right thread hier please:


    Post
    RE: AJPanel Enigma2 Tools - discussion & support
    Hello,
    I have a simple Question:
    How can I quickly change from watching a IPTV-stream (TV, VOD, Series) back to normal TV-Mode on my receiver? (SAT or Cable). I always have to push the "exit" - Button on my remote control a lot of times and then the channel button until this happens. I can't believe this is intended to be and I'm shure there must be a quicker way to do so. Please can you tell me? Thanx in advance :)
    bananenmann


    THX

    When you connect to the box with telnet or putty, you issue the command to repair

    Code
    dpkg --configure -a


    when it finishes, issue the command to restart enigma2

    Code
    systemctl restart enigma2


    and then when the system boots up, rerun the command one more time to make sure it's OK.

    Code
    dpkg --configure -a
    Code
    Hello everyone,

I urgently need your help. I installed AJ Panel a long time ago and stored the source for the IPTV m3u there at some point. The source is on an external network hard drive. I now had to change the IP address of the external network hard drive and am unable to assign the new address to the AJ panel anywhere. As soon as I click on the selection of my hard drive, it no longer finds anything. I'm afraid that he still has the old IP address saved and therefore doesn't get access. Can you help me in any way?

    biko hello and thank you for your work.

    After using the latest version for a while,

    I have to say that the function that you added when you press the exit button to show the infobar makes the navigation a bit difficult without any reason. You have to press the button twice to get in the channel list every time.

    So it will be nice to reverse it to the previous function.

    I think That showing the info bar with just the okay button it's more than okay.


    And Also it will be nice to add finally a shortcut so you can exit and close the Ajpanel with just one button. I know that you can do it by double pressing the menu button , it was a nice addition.

    Just some personal suggestions and kindly requests based on my user experience, so if it is possible in the next versions to change some little things.


    Thank you anyway just sharing my thoughts :)

    Quote from DennisRodman
    Code
    Hello everyone,

I urgently need your help. I installed AJ Panel a long time ago and stored the source for the IPTV m3u there at some point. The source is on an external network hard drive. I now had to change the IP address of the external network hard drive and am unable to assign the new address to the AJ panel anywhere. As soon as I click on the selection of my hard drive, it no longer finds anything. I'm afraid that he still has the old IP address saved and therefore doesn't get access. Can you help me in any way?

    What option do you use in AJPanel to access your network device ?


    If you access your device from AJPanel File Mananger, it will show the mounted devices (regardless of IP Address).


    In this case you need to check your mount table to ensure that your device is mounted correctly.

Enhance your Enigma2 with top add-ons panel plugins

Access curated downloads and community support for installation. Download and get support for Enigma2 add-ons panel plugins. Your resource for the best extensions and management tools.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login