E2m3u2bouquet - discussion & support

There are 1,612 replies in this Thread which was already clicked 252,109 times. The last Post () by hajosch.

    jack82, You asked a question in the wrong thread.

    This plugin does not need any additional “crutches” (plugins such as CrossEpg or EPGImport) to import EPG. He does everything on his own. Below are screenshots with plugin settings that answer your question

    Снимок экрана 2024-05-30 в 06.29.16.pngСнимок экрана 2024-05-30 в 06.28.17.png


    Remove your question from the topic you post it

    if you like it you can make donations

    Quote from jack82

    the channels and EPG at the same time.

    That's right. Updating bouquets allows you always to get them relevant to the playlist you are using. The bouquet update time is seconds. Updating the EPG takes much longer and depends on the number of channels in the playlist, the number of events in the EPG used and the processor performance of your device

    if you like it you can make donations

    Quote from jack82

    I would help with the translation with a good heart but I use a translator for every word I translate everything, I don't know English :)

    I took the liberty of translating it into Bulgarian. It is very similar to Ukrainian and Russian, which I speak fluently...


    The file from the attachment must be unpacked and the contents copied to the /locale folder of the already installed plugin. Restart GUI (restart enigma2) ...


    As a native speaker, please correct the cases and translation inaccuracies that “hurt” your eyes =) in a po-file in the /locale/bg/ folder ... then send me this file and I will add the file you edited in the next plugin update

    Quote from tbe

    which is the latest version. Thanks in advance

    Post
    RE: [Plugin] E2m3u2bouquet
    UPDATE
    1.7.2

    1) The code responsible for setting playlist parameters has been completely rewritten
    2) The base ConfigSelection class has been redesigned. If your image supports displaying graphics in the selection options of the settings window, then you will display icons instead of phrases. This modification also works on any DreamOS-based images. For example, this functionality can be “evaluated” on OpenPli, OpenBH, Merlin, GP4, etc. images.

    linuxsat-support.com/cms/attachment/265220/…
    pepsik



    But this is not the “latest” version, it’s a completely different plugin from the one posted on the OpenATV image feed... And the authors of the plugins are different

    if you like it you can make donations

    Quote from pepsik
    Quote from tbe

    which is the latest version. Thanks in advance

    Post
    RE: [Plugin] E2m3u2bouquet
    UPDATE
    1.7.2

    1) The code responsible for setting playlist parameters has been completely rewritten
    2) The base ConfigSelection class has been redesigned. If your image supports displaying graphics in the selection options of the settings window, then you will display icons instead of phrases. This modification also works on any DreamOS-based images. For example, this functionality can be “evaluated” on OpenPli, OpenBH, Merlin, GP4, etc. images.

    linuxsat-support.com/cms/attachment/265220/…
    pepsik



    But this is not the “latest” version, it’s a completely different plugin from the one posted on the OpenATV image feed... And the authors of the plugins are different

    I meant your latest version, thanks

    Quote from tbe
    Quote from pepsik
    Quote from tbe

    which is the latest version. Thanks in advance

    Post
    RE: [Plugin] E2m3u2bouquet
    UPDATE
    1.7.2

    1) The code responsible for setting playlist parameters has been completely rewritten
    2) The base ConfigSelection class has been redesigned. If your image supports displaying graphics in the selection options of the settings window, then you will display icons instead of phrases. This modification also works on any DreamOS-based images. For example, this functionality can be “evaluated” on OpenPli, OpenBH, Merlin, GP4, etc. images.

    linuxsat-support.com/cms/attachment/265220/…
    pepsik



    But this is not the “latest” version, it’s a completely different plugin from the one posted on the OpenATV image feed... And the authors of the plugins are different

    I meant your latest version, thanks

    Get this log file, looks like a provider issue but I have no real idea


    e2m3u2b_20240530-075022.log

    Quote from tbe

    Get this log file, looks like a provider issue but I have no real idea

    Code
    [30.05 07:31:19] [e2m3u2b] Corrupt /media/hdd/E2m3u2bouquet/config.xml file

    It looks like you filled out config.xml incorrectly... Most likely you did this in the editor on a PC... why? What's stopping you from creating a playlist using a GUI plugin?


    Next you corrected the configuration errors... but...

    Code
    [30.05 07:45:01] [e2m3u2b] [XL]: An error occurred -> Unable to parse the M3U playlist: ('Connection broken: IncompleteRead(145871811 bytes read, 59766259 more expected)', IncompleteRead(145871811 bytes read, 59766259 more expected))

    This indicates that your Internet connection was either interrupted or the provider is giving you a playlist with a different size from the one stated in the response headers

    Perhaps your Internet connection is very slow or your IPTV provider is very slow in serving the playlist file. Increase the downloading wait time in the plugin settings (change 120 seconds, for example to 240) ... Alternatively, you can try to download the playlist file from the link you have in any browser on your PC and then copy this file via FTP into the receiver and selecting it in the playlist settings in the plugin using the RC


    p.s. For example. I tested loading and processing a playlist over 100 MB in size containing over 1,300,000 entries.

    Снимок экрана 2024-05-30 в 10.33.57.png

    I have a gigabit Internet connection. Downloading and parsing took about a minute on my VU+Ultimo4K... You can see that in the log

    if you like it you can make donations

    Edited once, last by pepsik ().

    Kudos to your work. I went through the Bulgarian translation almost thoroughly. Everything is very correctly described. Feel free to move on to the next actolization. Thank you for your work.Everything is described and translated correctly, everything is understood and I think the right terms and words have been chosen. e2m3u2bouquet_1.7.3_all personally for me there will be many nice fixes thanks a lot. ctually, I still like 1.7.2 with the fixes :D

    Edited 2 times, last by jack82 ().

    You can make a slight correction to the Bulgarian translation. In settings below the save buttons

    Близо- Изход или Назад......... Добавитъ-Добавяне........Изчистванить-Изчистване That's all I notice for now as a correction

    Edited 4 times, last by jack82 ().

    Quote from jack82

    openpli4 Python 2.7.3 Is there an option to install even an older version of the prefix? There is no option to change the image, the receiver is a clone

    1) Newer -), not older

    2) For what reason? If we are talking about this plugin, then it will work on OpenPli4

    3) If there is some other reason, write your receiver's brand...otherwise it’s not clear what you’re talking about. Just changing the Python version won't work.

    if you like it you can make donations

    Quote from pepsik
    Quote from jack82

    openpli4 Python 2.7.3 Има ли опция за инсталиране дори на по-стара версия на префикса? Няма опция за смяна на изображението, приемникът е клонинг

    1) По-нови -), не по-стари

    2) По каква причина? Ако говорим за този плъгин, тогава той ще работи на OpenPli4

    3) Ако има друга причина, напиши марката на приемника...иначе не става ясно за какво говориш. Само смяна на версията на Python няма да работи.

    Vu+ solo clone cloud ibox 1 mips 333mhz Openpli4 Python 2.7.3 His tuner is broken, it works without a problem on iptv, but I can't get him to play the epg. He can easily read the references from other bouquets 1:0 etc . e2m3u2bouquet 1.7.2 it is installed but it is not visible in the plugins and there are no folders, I have to enter the addresses manually. It is an old receiver and there is no option to change to a new image

    Edited once, last by jack82 ().

Get community help for all other Enigma2 plugins

This is your forum for support, questions, and guides for plugins not covered in our specialized sections. Support for uncategorized and miscellaneous Enigma2 plugins. Find help, troubleshooting, and discussions for plugins that don't fit other forum categories.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login