Oscam Icam Sky DE and UK

There are 1,135 replies in this Thread which was already clicked 433,910 times. The last Post () by abu baniaz.

    for who asking what is stream relay ?

    Stream Relay config

    Stream Relay is software descrambling through internal streaming. It can be used for watching PowerVu channels (on old receivers not supporting the extended cw), or for channels using other unconventional encryption systems like Compel or Rosscrypt1.


    Enabling Stream Relay

    To enable the Stream Relay you have to: Select 1 - enabled in the Config -> Stream Relay -> Mode option.Set the proper Caid for the channels you want to enable the Stream Relay for.

    For PowerVu channels, caid is 0E00. Compel channels don't have an actual caid, so the OSCam-Emu's free-to-air FFFE caid is used. For Rosscrypt1 channels the caid is A101. Multiple caid values, separated with commas are accepted. For example, setting caid to 0E00,FFFE will enable the Stream Relay for PowerVu and Compel channels.


    Adding a fake caid

    Some channels, while being encrypted, they don't have any caid set. The stream Relay server treats these channels as if they were using the Compel encryption. If a channel is in fact encrypted with a different crypto-system, then you have to add a "fake" caid for it. You can do this in the SoftCam.Key file, using the following syntax:

    Code
    <em>A <srvid><pmt pid> FAKE <caid>
</em>

    for example:

    Code
    <em>A 00040104 FAKE A101
</em>

    The above line will set a fake caid A101 (RossCrypt1) for the channel with service id 0004 and pmt pid 0104. All values are in hexadecimal format. The syntax is similar to the A command that is used in oscam.dvbapi for the same purpose.


    Creating a modified channel list

    Stream Relay needs a modified channel list. First step is to get the streaming url for the channel you want to watch: Go to the OpenWebif and click on the "Stream" button for the channel you want to add.Download and save the .m3u file.Open the .m3u file with a text editor and get the stream link. It looks like this: http://stb:8001/1:0:19:0123:3EF:1:C00000:0:0:0:Replace the port (8001) with the relay port (default: 17999) and the host name ("stb") with 127.0.0.1. It should look like this: http://127.0.0.1:17999/1:0:19:0123:3EF:1:C00000:0:0:0:

    After preparing the new stream link, you need to create a new channel in your user bouquet and add the url. For example, when using DreamBoxEdit, this can be done like this: Go to the list in the middle "Bouquet details".Right click and select "IPTV and other streaming services" and then select "Add".Select "DVB/TS" as the service type.Write a name for the channel and add the new stream link as URL you prepared above.Set Service Type to "1" (SD) or "25" (HD) and enter the Service ID of the original channel. You can find it in the left list ("Services") or through the WebIf.Do NOT use the correct Transponder ID/Network ID/Namespace for the stream link. Instead, use dummy values like Transponder ID: "11", Network ID: "22" and Namespace: "33".

    Repeat these steps for every channel you want to watch via the Stream Relay.


    ***************

    thanks @esuo2

    i find old great topic here

    Quote from powervu

    it's scam

    Who benefits!!

    Who has an interest in that?!

    This method has been used from several years to open afn channels with Power View encryption

    But it was using a softcam file


    Yes, I tried everything and it didn't work for me

    But I don't know if it worked for someone else or not !!

    According to the creator:

    In order for it to work for you, you also need appropriate adjustments on the part of your provider - a new line with Icam support.


    While I'm testing it, it's working fine for me.

    Nosce te ipsum.

    Edited once, last by Warder ().

    thumbs up 3

    payservers sell this as a icam crack.

    but anter analyse it's IPTV.

    You have a local card?


    What image are you using?

    It uses Stream Relay, but I'm not going to argue with anyone about nonsense.


    Please don't write to me about how it works and similar things!


    • 2022/08/27 12:08:07 00000000 (emu) Stream client ****BRANDING-prime**** 0 connected
    • 2022/08/27 12:08:07 00000000 (emu) Stream client 0 request /1:0:19:83:6:85:C00000:0:0:0:
    • 2022/08/27 12:08:08 05DF3183 c (ecm) icam (P: 098D:0083: #CW=38B84906A04F573B0000000000000000:1310D2EEABF7D8FBD3B9E8428606C838 HOP:01): found (109 ms) by Warder-TV (P/2/2/2) - Sky Cinema Premieren HD
    • 2022/08/27 12:08:11 00000000 (emu) Stream client 0 disconnected
    • 2022/08/27 12:08:12 00000000 (emu) Stream client ****BRANDING-prime**** 0 connected
    • 2022/08/27 12:08:12 00000000 (emu) Stream client 0 request /1:0:19:6F:D:85:C00000:0:0:0:
    • 2022/08/27 12:08:17 00000000 (emu) Stream client 0 disconnected
    • 2022/08/27 12:08:17 00000000 (emu) Stream client ****BRANDING-prime**** 0 connected
    • 2022/08/27 12:08:17 00000000 (emu) Stream client 0 request /1:0:19:6E:D:85:C00000:0:0:0:
    • 2022/08/27 12:08:19 05DF3183 c (ecm) icam (P: 098D:006E: #CW=000000000000000002AF9F548C5A7D56:0ED534273A6A413F189781EF5ED211CB HOP:01): found (44 ms) by Warder-TV (P/2/2/2) - Sky Atlantic HD
    • 2022/08/27 12:08:22 00000000 (emu) Stream client 0 disconnected
    • 2022/08/27 12:08:22 00000000 (emu) Stream client ****BRANDING-prime**** 0 connected
    • 2022/08/27 12:08:22 00000000 (emu) Stream client 0 request /1:0:16:8:3:85:C00000:0:0:0:
    • 2022/08/27 12:08:23 05DF3183 c (ecm) icam (P: 098D:0008: #CW=1C5D8C621CCE6D510000000000000000:A3FEE96B2C6B6591F3ADCD044474AD19 HOP:01): found (44 ms) by Warder-TV (P/2/2/2)
    • 2022/08/27 12:08:25 00000000 (emu) Stream client 0 disconnected
    • 2022/08/27 12:08:26 00000000 (emu) Stream client ****BRANDING-prime**** 0 connected
    • 2022/08/27 12:08:26 00000000 (emu) Stream client 0 request /1:0:19:93:2:85:C00000:0:0:0:
    • 2022/08/27 12:08:27 05DF3183 c (ecm) icam (P: 098D:0093: #CW=0000000000000000F3E68B4BC8851350:576B2E1EDF6AAB34F5EBB044069BD7FA HOP:01): found (44 ms) by Warder-TV (P/2/2/2) - Sky One HD

    Don't worry about Icam, for it to work you need the right server, look at the oscam server file provided with the latest version of ICAM, there are a lot of places to fill, moreover, there are paid servers who are starting to make their promotions at 2 balls with Icam....next for me....trash...

    [reader]

    label=icam

    protocol=cccam

    device =

    user =

    password =

    inactivity timeout = 30

    group = 1

    disablecrccws=1

    cccversion=2.3.2

    ccckeepalive = 1

    audiabled = 1

    Now it stable and great, all what need server support i-cam

    nothing more than what till in explanation topic -- or by folwing kit888 ipk

    i think now it test via one channel from who do the stream relay becouas i test a lot of ch sam ch open is Sky sport

    (sky sport Bundesliga HD)

    and it stream relay not iptv as some say


    2.jpg


    3.jpg

    Code
    hi could you explain to me exactly how you got this to work?
and where can i get the whole file from?
I'm a total newbie, don't be upset if I don't understand it right away
thanks in advance

    Icam is 100% iptv!


    1 .) tuxbox the list only works in webtv

    2. ) it says below e2 stream at Tuxbox Neutrino etc

    3. ) at Dreamset it is converted as webusr.xml the list (iptv webtv)

    4.) note the list of m3u streams

    5.) icam is not hackable (Cisco) uk it 3 years

    6.) Compare the watermark at dazn etc

    7.) Compares iptv + sat list as written

    8.) Observe epg from time to time

    9.) icam unhackable

    10.) think think beforehand


    everything is fake and fraud

    you buy an iptv with only 1 country included - no recording etc possible

    I don't even pay 15 euros a year for iptv all countries and stable (120mb file)

    who thinks it is icam should think twice and think about it

    what people say it's not iptv - icam unfortunately have little idea

    and at satellite signal n/a

    Thank you for clarifying your idea and your topic

    I agree with you that the i-cam encryption hasn't been hacked yet -- and it's hard to code

    But I have a question

    Are the Spanish terrestrial channels on Hispasat 30 West, iptv or streaming?

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login