thanks
did the LOG work for you?
There are 1,135 replies in this Thread which was already clicked 434,623 times. The last Post () by abu baniaz.
thanks
did the LOG work for you?
did the LOG work for you?
not yet because i have an Android STB which is another history ....
;
You need to compile from source.
Here is the section regarding patching https://trac.streamboard.tv/oscam/wiki/BuildingOscam#patch
How many channels are open with 17113 mips ? Without payserver.
Your second oscam-11713-798.armv7ve-libusb great 1570544 dont work.
Test oscam-icam client
here is a fresh arm version for TEST
report if it's ok or not
;
For Zgemma h9.s run oscam, but still black screen with sky ger channels
I will see if there is something in my configuration that is not right,
Thank you very much Samur
Thanks my bro -MAHDI- DZ
Thanks @JLcode i don't see your topic from here
icam patch
set : USE_LIBUSB=1
| set : USE_UTF8=1
| set : USE_LIBCRYPTO=1
| set : custom CONF_DIR=/var/ (via toolchain.cfg)
| PROFILE : arm.profile
| MAX_CPUS : use 8 of 8 CPU(s)
| CONF_DIR : /var/
| UseFlags : USE_LIBCRYPTO=1 USE_LIBUSB=1 USE_UTF8=1
| Addons : WEBIF LIVELOG JQUERY TOUCH DVBAPI READ_SDT IRDETO_GUESSING DEBUG MONITOR CACHEEX CACHEEX_AIO CWCC CLOCKFIX EMU SOFTCAM
| Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX RADEGAST SCAM CONSTCW
| Readers : NAGRA NAGRA_MERLIN IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD DRE TONGFANG BULCRYPT GRIFFIN DGCRYPT
| CardRdrs : PHOENIX INTERNAL MP35 SMARGO DB2COM STINGER DRECAS SMART
| Binary : /home/mahdi-dz/s3/support/binaries/oscam-svn11713-arm_dream-webif-dvbapi-libusb-emu798
GEN --------> webif/pages.c
GEN --------> Compressed 466816 template bytes into 182060 bytes. 284756 saved bytes (61.00%).
BUILD ------> cscrypt/i_cbc.c
BUILD ------> cscrypt/i_ecb.c
BUILD ------> cscrypt/i_skey.c
BUILD ------> cscrypt/rc6.c
BUILD ------> cscrypt/fast_aes.c
BUILD ------> cscrypt/sha256.c
BUILD ------> cscrypt/md5.c
BUILD ------> cscrypt/des.c
BUILD ------> cscrypt/mdc2.c
BUILD ------> csctapi/atr.c
BUILD ------> csctapi/icc_async.c
BUILD ------> csctapi/io_serial.c
BUILD ------> csctapi/protocol_t0.c
BUILD ------> csctapi/protocol_t1.c
BUILD ------> csctapi/ifd_db2com.c
BUILD ------> csctapi/ifd_mp35.c
BUILD ------> csctapi/ifd_phoenix.c
BUILD ------> csctapi/ifd_drecas.c
BUILD ------> csctapi/ifd_sci.c
BUILD ------> csctapi/ifd_smargo.c
BUILD ------> csctapi/ifd_smartreader.c
BUILD ------> minilzo/minilzo.c
BUILD ------> csctapi/ifd_stinger.c
BUILD ------> module-cacheex.c
BUILD ------> module-camd35.c
BUILD ------> module-camd35-cacheex.c
BUILD ------> module-cccam-cacheex.c
BUILD ------> module-cccam.c
BUILD ------> module-cccshare.c
BUILD ------> module-constcw.c
BUILD ------> module-emulator-osemu.c
BUILD ------> module-emulator.c
BUILD ------> module-emulator-streamserver.c
BUILD ------> module-emulator-cryptoworks.c
BUILD ------> module-emulator-director.c
BUILD ------> module-emulator-biss.c
BUILD ------> module-emulator-irdeto.c
BUILD ------> module-emulator-nagravision.c
BUILD ------> module-emulator-powervu.c
BUILD ------> module-emulator-icam.c
BUILD ------> module-emulator-viaccess.c
BUILD ------> ffdecsa/ffdecsa.c
BUILD ------> module-csp.c
BUILD ------> module-cw-cycle-check.c
BUILD ------> module-dvbapi-chancache.c
BUILD ------> module-dvbapi.c
BUILD ------> module-gbox-helper.c
BUILD ------> module-gbox-sms.c
BUILD ------> module-gbox-remm.c
BUILD ------> module-gbox-cards.c
BUILD ------> module-gbox.c
BUILD ------> module-ird-guess.c
BUILD ------> module-monitor.c
BUILD ------> module-newcamd.c
BUILD ------> module-newcamd-des.c
BUILD ------> module-radegast.c
BUILD ------> module-scam.c
BUILD ------> module-webif-lib.c
BUILD ------> module-webif-tpl.c
BUILD ------> module-webif.c
BUILD ------> webif/pages.c
BUILD ------> reader-common.c
BUILD ------> reader-bulcrypt.c
BUILD ------> reader-conax.c
BUILD ------> reader-cryptoworks.c
BUILD ------> reader-dgcrypt.c
BUILD ------> reader-dre.c
BUILD ------> reader-dre-cas.c
BUILD ------> reader-dre-common.c
BUILD ------> reader-dre-st20.c
BUILD ------> reader-griffin.c
BUILD ------> reader-irdeto.c
BUILD ------> reader-nagra-common.c
BUILD ------> reader-nagra.c
BUILD ------> reader-nagracak7.c
BUILD ------> reader-seca.c
BUILD ------> reader-tongfang.c
BUILD ------> reader-viaccess.c
BUILD ------> reader-videoguard-common.c
BUILD ------> reader-videoguard1.c
BUILD ------> reader-videoguard12.c
BUILD ------> reader-videoguard2.c
BUILD ------> oscam-aes.c
BUILD ------> oscam-hashtable.c
BUILD ------> oscam-array.c
BUILD ------> oscam-cache.c
BUILD ------> oscam-chk.c
BUILD ------> oscam-client.c
BUILD ------> oscam-conf.c
BUILD ------> oscam-conf-chk.c
BUILD ------> oscam-conf-mk.c
BUILD ------> oscam-config-account.c
BUILD ------> oscam-config-global.c
BUILD ------> oscam-config-reader.c
BUILD ------> oscam-config.c
BUILD ------> oscam-ecm.c
BUILD ------> oscam-emm.c
BUILD ------> oscam-emm-cache.c
BUILD ------> oscam-failban.c
BUILD ------> oscam-files.c
BUILD ------> oscam-garbage.c
BUILD ------> oscam-lock.c
BUILD ------> oscam-log.c
BUILD ------> oscam-log-reader.c
BUILD ------> oscam-net.c
BUILD ------> oscam-llist.c
BUILD ------> oscam-reader.c
BUILD ------> oscam-simples.c
BUILD ------> oscam-string.c
BUILD ------> oscam-time.c
BUILD ------> oscam-work.c
BUILD ------> oscam.c
BUILD ------> Distribution/list_smargo-1.20_svn11713-798-arm-newnigma2-linux-gnueabihf-libusb
LINK -------> /home/mahdi-dz/s3/support/binaries/oscam-svn11713-arm_dream-webif-dvbapi-libusb-emu798.debug
STRIP ------> /home/mahdi-dz/s3/support/binaries/oscam-svn11713-arm_dream-webif-dvbapi-libusb-emu798
REMOVE -----> /home/mahdi-dz/s3/support/binaries/oscam-svn11713-arm_dream-webif-dvbapi-libusb-emu798.debug
Display More
Then .... as patch available
Attached
oscam-svn11713-arm_dream-webif-dvbapi-libusb-icam-emu798
by -MAHDI- DZ
must check libcrypto.so by do symlink
openatv 6.4
Openpli 8.2 - 8.3 , Openatv 7.0
Openatv 7.1 , OBH 5.1
black screen with sky channels
black screen with sky channels
Yes black screen
Test oscam-icam client
here is a fresh arm version for TEST
report if it's ok or not
;
It runs ok and I can see correct decoding on the log, but I get image like this:
Here is part of the log:
2022/09/25 09:57:52 00000000 (emu) Stream client 0 connected
2022/09/25 09:57:52 00000000 (emu) Stream client 0 request /1:0:19:8B:2:85:C00000:0:0:0:
2022/09/25 09:57:56 00000000 (emu) Stream client 1 connected
2022/09/25 09:57:56 00000000 (emu) Stream client 1 request /1:0:19:87:B:85:C00000:0:0:0:
2022/09/25 09:57:56 00000000 (emu) WARNING: stream client 0 no data from stream source
2022/09/25 09:57:57 4A2703CF c (radegast) radegast: new connection from 127.0.0.1
2022/09/25 09:57:57 4A2703CF c (client) plain radegast-client 127.0.0.1 granted (icam, au=off)
2022/09/25 09:57:57 4A2703CF c (ecm) icam (P: 098D:000000:0087:0000:0B62: #ECM_L:A7 #CW=00000000000000002FBCA24903D6AB46 HOP:01): found (63 ms) by XYZ_Server (P/2/2/2) - Sky Cinema Premieren +24 HD
2022/09/25 09:58:00 00000000 (emu) WARNING: stream client 0 no data from stream source
2022/09/25 09:58:00 00000000 (emu) Stream client 0 disconnected
2022/09/25 09:58:04 4A2703CF c (ecm) icam (P: 098D:000000:0087:0000:0B62: #ECM_L:A7 #CW=0000000000000000DA9C9438EFDCC32E HOP:01): found (318 ms) by XYZ_Server (P/2/2/2) - Sky Cinema Premieren +24 HD
2022/09/25 09:58:11 4A2703CF c (ecm) icam (P: 098D:000000:0087:0000:0B62: #ECM_L:A7 #CW=FBC7F9642C40350E0000000000000000 HOP:01): found (362 ms) by XYZ_Server (P/2/2/2) - Sky Cinema Premieren +24 HD
2022/09/25 09:58:17 4A2703CF c (ecm) icam (P: 098D:000000:0087:0000:0B62: #ECM_L:A7 #CW=0000000000000000E48F2F26D796FF43 HOP:01): found (245 ms) by XYZ_Server (P/2/2/2) - Sky Cinema Premieren +24 HD
2022/09/25 09:58:25 4A2703CF c (ecm) icam (P: 098D:000000:0087:0000:0B62: #ECM_L:A7 #CW=C8E00504DA913C6B0000000000000000 HOP:01): found (398 ms) by XYZ_Server (P/2/2/2) - Sky Cinema Premieren +24 HD
2022/09/25 09:58:32 4A2703CF c (ecm) icam (P: 098D:000000:0087:0000:0B62: #ECM_L:A7 #CW=00000000000000007123BF275D280B57 HOP:01): found (442 ms) by Vanillasky1 (P/2/2/2) - Sky Cinema Premieren +24 HD
2022/09/25 09:58:39 4A2703CF c (ecm) icam (P: 098D:000000:0087:0000:0B62: #ECM_L:A7 #CW=2E90444F05A686440000000000000000 HOP:01): found (273 ms) by Vanillasky1 (P/2/2/2) - Sky Cinema Premieren +24 HD
2022/09/25 09:58:45 4A2703CF c (ecm) icam (P: 098D:000000:0087:0000:0B62: #ECM_L:A7 #CW=000000000000000005B30A4ACA7B0537 HOP:01): found (230 ms) by Vanillasky1 (P/2/2/2) - Sky Cinema Premieren +24 HD
2022/09/25 09:58:53 4A2703CF c (ecm) icam (P: 098D:000000:0087:0000:0B62: #ECM_L:A7 #CW=F5BB961A7E4546150000000000000000 HOP:01): found (329 ms) by Vanillasky1 (P/2/2/2) - Sky Cinema Premieren +24 HD
2022/09/25 09:59:00 4A2703CF c (ecm) icam (P: 098D:000000:0087:0000:0B62: #ECM_L:A7 #CW=0000000000000000C2D9E17E5B7F4A07 HOP:01): found (410 ms) by Vanillasky1 (P/2/2/2) - Sky Cinema Premieren +24 HD
2022/09/25 09:59:07 4A2703CF c (ecm) icam (P: 098D:000000:0087:0000:0B62: #ECM_L:A7 #CW=0FFFAD3F8B12FF660000000000000000 HOP:01): found (286 ms) by XYZ_Server (P/2/2/2) - Sky Cinema Premieren +24 HD
Going back to r11711 I get normal picture !!!
Display MoreThen .... as patch available
Attached
oscam-svn11713-arm_dream-webif-dvbapi-libusb-icam-emu798
by -MAHDI- DZ
Oscam inside ZIP file has zero bytes, so no file no go, can you reupload the correct binary?
Oscam inside ZIP file has zero bytes, so no file no go, can you reupload the correct binary?
retry to download
Oscam inside ZIP file has zero bytes, so no file no go, can you reupload the correct binary?
retry to download
Ok now has a correct file inside and your version works perfectly on my GigaBlue UHD UE 4k.
Great !!!
For sh4 devices (ssl - stapi - stapi5 ) can only work on Enigma
The original images I think... It's hard to edit the channels file on them...
I tried too Icam with oscam-svn11713-arm_dream-webif-dvbapi-libusb-emu798 and I have problem (freezer) on Octagon SF8008 with OpenATV 7.0
Don’t have an account yet? Register yourself now and be a part of our community!