The software is open source, you can add the chip type by yourself, or the software source code
Integrated special level conversion chip, directly read and write 5v, 3.3v, 2.5v, 1.8v chip
There are 31 replies in this Thread which was already clicked 2,728 times. The last Post () by djangel912.
The software is open source, you can add the chip type by yourself, or the software source code
Integrated special level conversion chip, directly read and write 5v, 3.3v, 2.5v, 1.8v chip
do you have 8 pins right for both nand? the welding seems smd so you have to do it manually, be careful
nope, them are all bga, making it impossible to solder to it
do you have 8 pins right for both nand? the welding seems smd so you have to do it manually, be careful
nope, them are all bga, making it impossible to solder to it
you need a bga adapter let me see..........
I found out this datasheet that includes the fbga connections
you need this fbga 63
MR BGA63 adapter (multi-com.eu)
check also on aliexpress there price is cheaper
They won't work alone, they NEED a separate board such as pc 3000 that costs around 5k euros
You see, this is pretty expensive...
BUT I've found out an article on the Johnny b. forum that talks about an asian paytv box with the same CPU of mine (Italian paytv)
I don't have any piece of hardware to connect via jtag, but they don't seem expensive
If you know a board that can allow jtag connection for around 30 euros pls let me know, i will try to connect via jtag
Display MoreThey won't work alone, they NEED a separate board such as pc 3000 that costs around 5k euros
You see, this is pretty expensive...
BUT I've found out an article on the Johnny b. forum that talks about an asian paytv box with the same CPU of mine (Italian paytv)
I don't have any piece of hardware to connect via jtag, but they don't seem expensive
If you know a board that can allow jtag connection for around 30 euros pls let me know, i will try to connect via jtag
you need to use hot air only that inevitably you have to remove the chip because since he has no "teeth" there is no gripper that holds and than use another programmer as iFix Universal Programmer RT809H for NOR NAND EMMC EC MCU ISP not ch341a as for the jtag I inform you and let you know even if you remember that everything is inside the nand while in the cpu there is no fw
some jtag info
you can use broadcom studio 3 bcm97325
you can connect by 3 ways i2c, spi, ethernet
let me know if you can connect it via LAN (rj45) please
Oh this is very good
i will try rn
But, how can i connect to the box via ethernet?
thank you
They won't work alone, they NEED a separate board such as pc 3000 that costs around 5k euros
You see, this is pretty expensive...
BUT I've found out an article on the Johnny b. forum that talks about an asian paytv box with the same CPU of mine (Italian paytv)
I don't have any piece of hardware to connect via jtag, but they don't seem expensive
If you know a board that can allow jtag connection for around 30 euros pls let me know, i will try to connect via jtag
Are u here?
Oh this is very good
i will try rn
But, how can i connect to the box via ethernet?
thank you
You can connect it via rj45
you can use tl866ii plus
Here the tutorial
Don’t have an account yet? Register yourself now and be a part of our community!