MultiStalker Pro - discussion & support

    • MultiStalker Pro
  • ziko
  • Closed
  • Thread is marked as Resolved.

There are 1,932 replies in this Thread which was already clicked 705,263 times. The last Post () by master G.

    Quote from bountyhunter21

    @ziko sorry but are you sure those commands are okay or am I doing something wrong?

    And do I have to copy and paste them both at the same time or first number1 and then number2?

    For the first command though, It says to me command not found. :(

    Thank you.

    Code
    init 4 && ENIGMA_DEBUG_LVL=4 enigma2 > /tmp/e2.log 2>&1
    Quote from ZEUS IVAYLO

    Zico you have always ignored the users of the mips system, and this time you didn't show it, why you do it I don't know, but us mips users, do we have to change our tuners to be favored, this is extremely frivolous

    Quote from ziko

    OPENPLI DEVELOP


    ARM

    Zico you have always ignored the users of the mips system, and this time you didn't show it, why you do it I don't know, but us mips users, do we have to change our tuners to be favored, this is extremely frivolous.

    have some patience, i have an arm device thats why i always drop it first and since when i ignore mips devices.


    Screenshot from 2024-06-05 19-11-39.png


    here is the last update for mipsel devices was like a week ago and i just dropped v1.2 two days ago. i have my life and my work i do this only on my free time.


    the compilation for mips devices is already running and each arch takes at least 4-6 hours to compile


    Screenshot from 2024-06-05 19-06-34.png


    Screenshot from 2024-06-05 19-06-58.png


    this is the last time i will go trough this conversation .

    if you were correct, this post wouldn't exist, that's all up to you.

    @ZEUS IVAYLO

    Stop "spoiling the air" with your ramblings, you already wrote this here a month ago.


    Post
    RE: MultiStalker Pro - discussion & support
    why OPENPLI DEVELOP OPENPLI MIPSEL are always neglected, can some equality, I personally don't like open atv but there are always updates for them
    iboooo

    Nosce te ipsum.

    thumbs up 2

    Hi,

    I got problem with instaling new Multi-Stalker 1.2 (1.1 works good on my openATV 7.4)

    Code
    root@sf8008:~# opkg install --force-depends /tmp/*.ipk                                                                                                        Couldn't find anything to satisfy '/tmp/*.ipk'.                                                                                                               Unknown package '/tmp/*.ipk'.                                                                                                                                  * opkg_solver_install: Cannot install package /tmp/*.ipk.                                                                                                    root@sf8008:~# opkg update && opkg install --force-overwrite /tmp/*.ipk                                                                                       Downloading https://feeds2.mynonpublic.com/7.4/sf8008/3rdparty/Packages.gz.                                                                                   
Updated source 'openatv-3rdparty'.                                                                                                                            Downloading https://feeds2.mynonpublic.com/7.4/sf8008/all/Packages.gz.                                                                                        
Updated source 'openatv-all'.                                                                                                                                 Downloading https://feeds2.mynonpublic.com/7.4/sf8008/cortexa15hf-neon-vfpv4/Packages.gz.                                                                     
Updated source 'openatv-cortexa15hf-neon-vfpv4'.                                                                                                              Downloading https://raw.githubusercontent.com/oe-alliance/enigma2-settings-feed/gh-pages/Packages.gz.                                                         
Updated source 'enigma2-settings-feed'.                                                                                                                       Downloading https://raw.githubusercontent.com/oe-alliance/picons-feed/gh-pages/Packages.gz.                                                                   
Updated source 'oe-alliance-picon-feed'.                                                                                                                      Downloading https://feeds2.mynonpublic.com/7.4/sf8008/sf8008/Packages.gz.                                                                                     
Updated source 'openatv-sf8008'.                                                                                                                              Downloading https://feeds2.mynonpublic.com/7.4/sf8008/sf8008_3rdparty/Packages.gz.                                                                            
Updated source 'openatv-sf8008_3rdparty'.                                                                                                                     Downloading https://feeds2.mynonpublic.com/7.4/STATIC/static-cortexa15hf-neon-vfpv4/Packages.gz.                                                              
Updated source 'openatv-static-cortexa15hf-neon-vfpv4'.                                                                                                       Downloading https://feeds2.mynonpublic.com/7.4/STATIC/static-sf8008/Packages.gz.                                                                              
Updated source 'openatv-static-sf8008'.                                                                                                                       Couldn't find anything to satisfy '/tmp/*.ipk'.                                                                                                               Unknown package '/tmp/*.ipk'.                                                                                                                                  * opkg_solver_install: Cannot install package /tmp/*.ipk.                                                                                                    root@sf8008:~#
    Quote from gazz12345

    red back on all the information .and did every thing comments said and still getting 404 error .im using zgemma h92s openatv 7.4 with armv7

    read this and share the log with me


    Post
    RE: MultiStalker Pro - discussion & support
    (Quote from madhouse)

    i will after mips


    (Quote from bountyhunter21)

    i need some logs from your device

    in the console execute these commands and try to access the url after that hit ctrl+c and init 3 to boot to normal mode and attach the log file located in /tmp/e2.log
    (Code, 2 lines)

    ziko

    sorry for this question.im not so specialist in this plugin.i have the problem error 404.i know this must tiring to ask for help.ziko you make excellent work.is it easy to upload all the instructions how to solve the problem in txt file so anyone can read that at annytime?keep up the good work ziko!

    Ich habe meine Zgemma 11 erfolgreich mit Multistalker am laufen. Habe noch eine DM 920 mit GP 4.2 und würde da auch gerne Multistalker installieren, ohne das Image zu wechseln. Kann man da irgendwann mal mit einer Version rechnen ?

    Wenn nicht, gibt es dafür noch eine andere Möglichkeit für Mac-Adressen ? Danke schon mal für Eure Hilfe.


    :smiley370:


    I have my Zgemma 11 running successfully with Multistalker. I still have a DM 920 with GP 4.2 and would also like to install Multistalker without changing the image. Can we expect a version at some point?

    If not, is there another option for Mac addresses? Thank you for your help.

    Quote from ziko
    Quote from bountyhunter21

    @ziko sorry but are you sure those commands are okay or am I doing something wrong?

    And do I have to copy and paste them both at the same time or first number1 and then number2?

    For the first command though, It says to me command not found. :(

    Thank you.

    Code
    init 4 && ENIGMA_DEBUG_LVL=4 enigma2 > /tmp/e2.log 2>&1

    Now i think it worked. i sent you the log with pm.

    thank you

    Post
    RE: MultiStalker Pro - discussion & support
    (Quote from djkpap)

    need to delete old jason file and start by new empty one
    structure are changed

    (Code, 19 lines)

    biko


    etc/enigma2/MultiStalkerPro.json

    @ziko


    Please add a scrollbar to the portal list.

    If possible, please also add page numbering to the provider and channel lists as requested before.


    Scroll bars and page numbering make it much easier for the user to manage very large lists and not get lost in thousands of entries.

    I cannot access webif to enter portals. I get only this message -see attachment

    Uno4k SE/ OpenATV 7.4

    Do you have a VPN turned on. as mine does this also but works fine with the VPN turned off

Your resource for Enigma2 IPTV plugins

Discover the best Enigma2 IPTV plugins. Access downloads and dedicated support for integrating live TV streams and video-on-demand services. Find downloads, setup guides, and community support for the latest streaming players and playlist managers.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login