openATV 7.3 USB Image for Original Box

**Captain** · Jun 29th 2023

openATV Image back for DM500HD Original Box

more infos here

**felix dias** · Jun 29th 2023

My dream 500hd doesn't have a usb port.

A normal flash was great.

It will be possible ?

I hope

Thank you very much

**Captain** · Jun 29th 2023

64mb flash you can forget this add a usb port

**vedovanera** · Jun 29th 2023

My old 500HD has a Usb Port...but is necessary to have another like showed in the picture? Thank you

**Captain** · Jun 29th 2023

only one usb port is ok

**vedovanera** · Jun 29th 2023

Thank you...can you explain me how to entry in the bios?

**Captain** · Jun 29th 2023

here

**vedovanera** · Jul 14th 2023

I tried to entry in the bios, but the procedure is for 800 and seems don't work for 500HD....some idea? Thanks

**Captain** · Jul 14th 2023

its 100% identical have you read the infos

**vedovanera** · Jul 14th 2023

Quote from Captain

its 100% identical have you read the infos

After the installation is complete, restart the box, remove the USB stick and change the bios to USB boot.

Here is the problem....cannot entry in the Bios with 500HD.....

here

this page is for 800 and i can't found a page or a guide for 500HD

**vedovanera** · Jul 14th 2023

Code

http://wiki.blue-panel.com/index.php/Dreambox_Bios_(en)

I found this page....500HD is not present among the boxes where it is possible to enter the bios....is it true or i take a mistake?

thank you

**Captain** · Jul 14th 2023

enter bios is same, you need a usb console cable and follow the step like dm800

**Panda555** · Jul 14th 2023

vedovanera

After copying the image, remove the USB stick. Turn off the power button on the rear panel. Then simultaneously turn on and hold the front button until DHCP STOP appears on the display. Connect with telnet and you will get a display for changing BOOT. To change the BOOT, use the PgUp and PgDn buttons on the PC keyboard. I did it the same way for my dm800se.

Here is much better explained. On the bottom the page read "Configure The DM800"

Thread

How To Boot Your DM800 From A USB Stick

To configure your Dm800 to boot from a USB stick, all that is required:

A USB stick that is supported by your DB.
A telnet connection to access your DB.
The image.nfi you want to install.
Nfidump to extract your desired image & kernel.

If you don't have a Linux PC available, setting up the USB stick on your DB will probably be easier than attempting to do it on a M$ or Apple PC. Unfortunately, during the process of writing this guide, I noticed that my DM800 OpenPLi image has no ability to create a…

Eminem

May 4th 2012

**vedovanera** · Jul 14th 2023

Thank you guys....i just loaded 7.3 on USB stick and change Bios to Usb....now the box run Openatv 7.3, but if i want to send a channel list, this settings will be loaded automatically on a USB stick? Thx

**Captain** · Jul 14th 2023

yes all on usb flash rootfs not used

**toysoft** · Jul 17th 2023

Quote from vedovanera
Code
http://wiki.blue-panel.com/index.php/Dreambox_Bios_(en)
I found this page....500HD is not present among the boxes where it is possible to enter the bios....is it true or i take a mistake?

thank you

Wrong, exactly SAME.

ah_1st · Mar 15th 2024

hi

i have a problem interring to bios in dm 500 hd

if i open web page with the ip address its ok it opens

but if i need to connect via FTP it refuse the connection

i try

1 win sc

2- putty

no one of them connect

**abu baniaz** · Mar 15th 2024

Have you set a password and entered it in your FTP program? What error are you getting?

**toysoft** · Mar 15th 2024

Quote from ah_1st

hi
i have a problem interring to bios in dm 500 hd
if i open web page with the ip address its ok it opens
but if i need to connect via FTP it refuse the connection
i try
1 win sc
2- putty
no one of them connect

Display More