183D/183E EMM Activation via the http/https server with OSCam

There are 776 replies in this Thread which was already clicked 142,624 times. The last Post () by sodex.

    detect = cd

    nagra_read = 1

    ident = 183E:000000,005411

    group = 1

    emmcache = 1,2,3,0

    auprovid = 005411


    I've had it like this for years since the 183D started... and it works without problems... and updates... then everyone is free to do as they want.

    VuSolo_VuSOLO.PRO_VuZero_VuSOLO2 SE_DR.800sim japar ed 800SEsim a8p_Mutant 51_4k_GB.UE.4k_DM.920

    what I don't understand is finding configurations...and then not understanding the concept...if you use a Golden and the pastebin...you have to understand that they are of no use in the Oscam config...block emm or save emm...what's the point if you want to leave everything running smoothly...the Oscam without filters works with the pastebin perfectly.

    VuSolo_VuSOLO.PRO_VuZero_VuSOLO2 SE_DR.800sim japar ed 800SEsim a8p_Mutant 51_4k_GB.UE.4k_DM.920

    My card is running and is recognized but the Oscam from Samur does not query the URL. He doesn't even try. If the URL I have https://pastxxxxxxxxxxxjV didn't work then I would understand, because then there would be an error message or a failed attempt that said he couldn't write the EMM.

    But it doesn't try to update me or make any requests. The card is running and it's open, I write the EMM by hand and then it's light again. I just tested everything and it doesn't update via the URL


    Edited once, last by saerdnast: Oscam Version : Version: oscam-1.20_svn-r11734-799 Compiler: arm_cak7-icam-l2b_(samur) ().

    device = /dev/Tivusat_183E



    device = /dev/sci0



    Tivusat_183E....???

    protocol = mouse


    then you are using Smargo.....and a counterintuitive internal reader or Smargo make up your mind.


    but do you have a hard head...or do you do it on purpose...only the type of reader should be mentioned...what does the name of the provider have to do with it...?.

    VuSolo_VuSOLO.PRO_VuZero_VuSOLO2 SE_DR.800sim japar ed 800SEsim a8p_Mutant 51_4k_GB.UE.4k_DM.920

    I've been using easymouse 2 USB for years and address it via udev rules. which makes sense if you have several of the same reading devices

    This prevents the cards from being incorrectly assigned when the Oscam is restarted or a reader is not recognized


    I give the name myself, I can also use a different one depending on what I specify in the udev rule


    If it were wrong, the card would not be recognized and the Tivusat transmitters would remain dark and write to the card by hand using EMM, so extending it is also possible

    Edited 2 times, last by saerdnast ().

    Tivusat_183E_oscam.log

    • New
    Quote from straniero1

    hello

    i want to use samur oscan but either i'm blind or i can't find the right one for the dm920.

    there is arm sf4008 SSL 1.0.2 or 1.1.1 or 3.x.x. but what should i use for the dm920?

    thank you very much

    1. find your ssl path in box

    Code
    ls -l /usr/lib/libss*.*


    2.find your box arch( for type oscam)


    Code
    dpkg --print-architecture | grep -iE "arm|aarch64|mips|cortex|sh4|sh_4"
    • New

    2024/04/08 11:20:00 00000000 s (main) Machine = mips

    2024/04/08 11:20:00 00000000 s (main) Stb model = dm8000

    2024/04/08 11:20:00 00000000 s (main) Stb vumodel = vusolo2

    2024/04/08 11:20:00 00000000 s (main) Stb boxtype = vusolo2


    in your log....???


    in the photo there is ssl 100 Dream 920...???


    there are some things that don't match
    you are using the 920 oscam and Arm

    if you are using 8000 or vusolo2 it is Mips

    you have to decide what you are doing..."



    VuSolo_VuSOLO.PRO_VuZero_VuSOLO2 SE_DR.800sim japar ed 800SEsim a8p_Mutant 51_4k_GB.UE.4k_DM.920
    • New

    to overcome the problem if it doesn't work...and you have the ssl 100 and you want to update it and switch to the ssl 102 you just have to download from the feeds to MgCam which automatically takes your ssl to the 102 so you can get its precise oscam



    OSCam-11734-799 (arm sf4008_h8.2h_h9.2h OpenSSL-1.0.2 libusb)
    or
    OSCam-11734-799 (arm sf4008_h8.2h_h9.2h OpenSSL-1.1.1 libusb)

    VuSolo_VuSOLO.PRO_VuZero_VuSOLO2 SE_DR.800sim japar ed 800SEsim a8p_Mutant 51_4k_GB.UE.4k_DM.920
    Sláinte 1 Like 1

OSCam-EMU Support Forum

Configs, discussion, downloads and guides for OSCam-EMU Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login