I copy the playlist.txt via Total Commander. But I'll test it with #name after the m3uplus.
I'll test it tomorrow or Sunday and report back. If it's still the case, I'll make you a video and send you the download link privately if you agree.
I copy the playlist.txt via Total Commander. But I'll test it with #name after the m3uplus.
I'll test it tomorrow or Sunday and report back. If it's still the case, I'll make you a video and send you the download link privately if you agree.
Hello, I have a rare problem that I can solve myself, but it is the same on all receivers. I'm using Open ATV 7.4 with Vu Zero 4k and Gigablue Trio 4K. I have 6 receivers here in the house and everything is the same. If I recreate the image and use Bouqet Maker to create my IPTV list the way I want, i.e. deselect countries that I don't need. He downloads the files and creates the new bouquets, they are there and everything works. No matter when I open the bouquet maker the second time, it's as if I never created a list. I have to do everything a second time. When I do everything a second time everything is as it should be.
It's always like that and I don't think it's just me. Why is it that I have to do it twice? I didn't have these problems with Jedimaker Xtream.
Great and fantastic JOB
I have the VU Zero 4K with openatv 7.4 LIVE Tv and Serie cann ich sehr gut anschauen. Leider bekomme ich bei den Filme eine Fehlermeldung
( FF_ERROR: No such file or directory, code -2 ) The VODs from the provider run on all other devices, including the VU Zero 4K with Xstreamity. Do I have to reinstall something?
This must be done before you start reading the menu if you can also see the version of Multistalker Pro (git version) installed now.
Display MoreIMG_0023.jpegTivusat_183E....???
protocol = mouse
then you are using Smargo.....and a counterintuitive internal reader or Smargo make up your mind.
but do you have a hard head...or do you do it on purpose...only the type of reader should be mentioned...what does the name of the provider have to do with it...?.
I've been using easymouse 2 USB for years and address it via udev rules. which makes sense if you have several of the same reading devices
This prevents the cards from being incorrectly assigned when the Oscam is restarted or a reader is not recognized
I give the name myself, I can also use a different one depending on what I specify in the udev rule
If it were wrong, the card would not be recognized and the Tivusat transmitters would remain dark and write to the card by hand using EMM, so extending it is also possible
it's a stupid question I know, but I'm new to all this. How do I install these four files on mu Uno 4k SE? There is no ipk file here.
see '#922 or the new Version #953 i installed it on VuZero 4K and OpenAtv 7.4
My card is running and is recognized but the Oscam from Samur does not query the URL. He doesn't even try. If the URL I have https://pastxxxxxxxxxxxjV didn't work then I would understand, because then there would be an error message or a failed attempt that said he couldn't write the EMM.
But it doesn't try to update me or make any requests. The card is running and it's open, I write the EMM by hand and then it's light again. I just tested everything and it doesn't update via the URL
[reader]
label = Tivusat_183E
description = Tivusat_183E
protocol = mouse
device = /dev/Tivusat_183E
autospeed = 0
caid = 183E
rsakey = A92DAxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx64B5
emm_url = https://pasxxxxxxxxxxxxDjV
emm_reload_minute = 15
fix07 = 0
detect = cd
nagra_read = 1
ident = 183E:000000,005411
group = 1
emmcache = 0,3,2,0
cccreshare = 0
auprovid = 005411
the problem is not just caused by the pluginYou may have been banned from IPTV after multiple tests.
Usually the ban issue is a temporary problem.
So your saying you are a pay server ? Is that correct ??
No, I use IPTV and have registered resellers
I now have tivusat as group 1 but why is that a mistake, the cards have been speaking like this for years.
protocol = mouse
device = /dev/Tivusat_183E ?????
Udev = /dev/ttyUSB0 / Reader A4036SMP / Name Tivusat_183E
The advantage is that the correct assignment of readers is always there when restarting and no readers are swapped.
card is running, you can also write emm by hand so that it becomes bright again
dann deaktivier deine Karte und nimm die Configs von #745 - wer weiss was da mit deinen Configs nicht stimmt
Then deactivate your card and take the configs from #745 - who knows what's wrong with your configs
I adjusted it see #754 and restarted oscam it afterwards
I have a quick question about the Tivusat card: Cardok but (no entitlements) I'll test it further tomorrow
Habe ich doch angepasst siehe #754 auch danach oscam neu gestartet
kurze frage bei mir ist bei der Tivusat Karte : Cardok aber (no entitlements) werde morgen mal weiter testen
the problem is not just caused by the pluginYou may have been banned from IPTV after multiple tests.
Usually the ban issue is a temporary problem.
That's the problem, nothing happens. The card runs and runs but nothing happens that it does anything.
It doesn't happen that he checks the URL and then possibly writes the new one or doesn't write it because it's already there.
Das ist ja das Problem es kommt nichts. Die Karte läuft und läuft aber es passiert nichts das er was tut.
Es kommt nicht das er die Url kontrolliert und dann eventuell das neue schreibt bzw. es nicht schreibt weil es schon drauf ist.
Unfortunately it still doesn't work for me. No idea why. Card is recognized and also works. Channels become bright. I set the time for the URL update to 15 minutes but it doesn't try to update. Nothing to be found anywhere in the log
Version: oscam-1.20_svn-r11734-799
Compiler: arm_cak7-icam-l2b_(samur)
2024/04/04 16:56:58 7535C4AF r (reader) Tivusat_183E [nagra] Reader initialized (device=/dev/Tivusat_183E, detect=cd, mhz=357, cardmhz=357)
2024/04/04 16:56:58 7535C4AF r (reader) Tivusat_183E [nagra] card detected
2024/04/04 16:57:00 7535C4AF r (reader) Tivusat_183E [mouse] ATR: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
2024/04/04 16:57:00 7535C4AF r (reader) Tivusat_183E [mouse] Setting baudrate to 111600 bps
2024/04/04 16:57:01 7535C4AF r (reader) Tivusat_183E [mouse] detect nagra tiger card
2024/04/04 16:57:01 7535C4AF r (reader) Tivusat_183E [mouse] type: NAGRA, caid: 183E, IRD ID: ############
2024/04/04 16:57:01 7535C4AF r (reader) Tivusat_183E [mouse] ProviderID: 00 00 54 11
2024/04/04 16:57:02 7535C4AF r (reader) Tivusat_183E [mouse] ready for requests
2024/04/04 16:57:02 7535C4AF r (reader) Tivusat_183E [mouse] found card system nagra
2024/04/04 16:57:02 7535C4AF r (reader) Tivusat_183E [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2024/04/04 16:57:02 7535C4AF r (reader) Tivusat_183E [nagra] ROM: T I G E R 6 0 1
2024/04/04 16:57:02 7535C4AF r (reader) Tivusat_183E [nagra] REV: R e v M 8 7
2024/04/04 16:57:02 7535C4AF r (reader) Tivusat_183E [nagra] SER: ############
2024/04/04 16:57:02 7535C4AF r (reader) Tivusat_183E [nagra] CAID: 183E
2024/04/04 16:57:02 7535C4AF r (reader) Tivusat_183E [nagra] Prv.ID: 00 00 54 11 (sysid)
2024/04/04 16:57:02 7535C4AF r (reader) Tivusat_183E [nagra] Activation Date : 01/01/2009
2024/04/04 16:57:02 7535C4AF r (reader) Tivusat_183E [nagra] Expiry Date : 01/01/2038
2024/04/04 16:57:02 7535C4AF r (reader) Tivusat_183E [nagra] Credit : 0 euro
2024/04/04 17:01:14 483772B1 c (ecm) XXXXXX (183E@000000/0000/3B6C/91:D030EF29560E3B49970C520AB950AD1B): found (244 ms) by Tivusat_183E - WarnerTV Italy HD
[reader]
label = Tivusat_183E
description = Tivusat_183E
protocol = mouse
device = /dev/Tivusat_183E
caid = 183E
rsakey = A92D.......................................................B5
emm_url = https://pastxxxxxxxxxxxDjV
emm_reload_minute = 15
detect = cd
ident = 183E:000000,005411
group = 4
emmcache = 0,3,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
saveemm-g = 1
cccreshare = 0
auprovid = 005411
[global]
logfile = /var/log/ipc/OScam.log
initial_debuglevel = 64
logduplicatelines = 1
clienttimeout = 5500
fallbacktimeout = 5400
fallbacktimeout_percaid = 18:1000
bindwait = 40
netprio = 1
sleep = 600
nice = -1
maxlogsize = 1200
waitforcards = 0
waitforcards_extra_delay = 550
preferlocalcards = 2
dropdups = 1
usrfile = /var/log/ipc/OScamuser.log
emmlogdir = /var/log/
lb_mode = 1
lb_reopen_invalid = 0
lb_retrylimit = 2800
lb_auto_betatunnel = 0
lb_savepath = /var/log/lb.log
lb_retrylimits = 18:5500
failbantime = 1440
failbancount = 5
[cache]
delay = 50
[cccam]
port = xxxxxxx
nodeid = 1D9CC92910DB14CA
version = 2.1.1
reshare = 0
reshare_mode = 1
ignorereshare = 1
[streamrelay]
[monitor]
port = 16123
nocrypt = 192.168.1.0-192.168.1.255
aulow = 120
[webif]
httpport = xxxxxxx
httpuser = xxxxxxxx
httppwd = xxxxxxxxx
httpscript = /var/emu/script/webif_scripts
httphelplang = de
httprefresh = 15
httpallowed = 192.168.1.0-192.168.1.255
aulow = 120
Yesterday I tested it and the older version ran on the Vu Zero 4k Live Tv without any problems
Today I wanted to test further and I never get a connection
enigma2-plugin-extensions-multi-stalkerpro_1.1+git48+e614afa0+e614afa76c-r0_cortexa15hf-neon-vfpv4.ipk
Failed to load Providers
I also noticed that when I start Multistalker Pro and go to Live / Vod / TV Shows / Account Details or Portals, it says URL / MAC address as it should, I go out immediately or save with the green button, nothing happens.
But when I press the OK button it does > in front of the URL / MAC, is that correct?
Vu Zero 4K
Gigablue Trio 4K
it's important what image you use in your receivers, the architecture of the processors is arm, so see above
I installed Multistalker from the feed on the zero4k with openatv 7.4.
Live TV starts and plays but the VoD films don't.
This is for Vu Zero 4K or?
Thank you.Great Job
I search new Version for
Vu Zero 4K
Gigablue Trio 4K
Thanks
I have unnamed my reader in Tivusat_183E and also removed the saving and blocking of the emm. Restarted Oscam but still the same. He doesn't write anything
Great Job
Why doesn't the VOD start on my Vu Zero4K with OpenAtv 7.3?
Unfortunately EPG is not correct either.
Live TV works very well
I have now updated to openAtv 7.4 and now I get the error message for VOD
FF_Eor: No such file or directory, code -2
Verify if works your page : emm_url = https://pastexxxxxxxxxxxxxRm
I have 4 Url´s and all works
If I open one of these URLs, the current one is displayed on all of them
Excuse me
Oscam by Samur is running on my server but it doesn't update.
[reader]
label = Tivusat
protocol = mouse
device = /dev/Tivusat
autospeed = 0
caid = 183E
rsakey = A92DA72Fxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
emm_url = https://pastexxxxxxxxxxxxxRm
emm_reload_minute = 5
fix07 = 0
detect = cd
nagra_read = 1
mhz = 368
cardmhz = 368
group = 4
emmcache = 0,1,2,0
blockemm-u = 1
saveemm-unknown = 1
saveemm-g = 1
cccreshare = 0
I always have to write the EMM on the card by hand
i test it
root@raspberrypi ~ > cd /var/emu/script/
root@raspberrypi /var/emu/script > ./tivusat.sh >/dev/null 2>&1 &
[1] 16282
root@raspberrypi /var/emu/script > bash tivusat.sh
tivusat.sh: Zeile 7: $'\r': Kommando nicht gefunden.
tivusat.sh: Zeile 23: Dateiende beim Suchen nach `"' erreicht.
tivusat.sh: Zeile 25: Syntax Fehler: Unerwartetes Dateiende.
[1]+ Exit 126 ./tivusat.sh > /dev/null 2>&1