183D/183E EMM Activation via the http/https server with OSCam

There are 1,083 replies in this Thread which was already clicked 350,313 times. The last Post () by samur.

    Quote from eian00
    Quote from radio3
    Quote from eian00

    If you have a working wecam CI module and card on your enigma2 MIPS device, how could you read from the same device the updated emm without any additional hardware?

    sure if you have certified hardware, it is clear that you have no problem, the card will be updated without any problem


    certo se hai hardware certificato, è chiaro ch enon hai nessun problema, la scheda verrà aggiornata senza nessun problema

    sure, the card is updating over the cam, but where can I see the current emm in case I need it for my other card without the CI reader?

    IMG_20240222_211423.jpg


    IMG_20240222_211551.jpg


    + Pc

    VuSolo_VuSOLO.PRO_VuZero_VuSOLO2 SE_DR.800sim japar ed 800SEsim a8p_Mutant 51_4k_GB.UE.4k_DM.920+900
    H9combo_H9.2H-SE_H7s_H2H_H5

    so each time the card updates over its original CI, you need to take it out and insert it in the card logger to read the emm. I was thinking there is a less manual solution

    nooooo you can always leave it inserted the device you just need to analyze the last part (if you know the moment or the hours that the change will take place emm) sometimes I leave it logging for 2 days...no then what's the point of saving the logs...only if you study.

    VuSolo_VuSOLO.PRO_VuZero_VuSOLO2 SE_DR.800sim japar ed 800SEsim a8p_Mutant 51_4k_GB.UE.4k_DM.920+900
    H9combo_H9.2H-SE_H7s_H2H_H5
    Quote from eian00

    so each time the card updates over its original CI, you need to take it out and insert it in the card logger to read the emm. I was thinking there is a less manual solution

    Yes there are less manual solutions, and some more automated ones, we also talked about them here on this forum.....



    Si ci sono soluzioni meno manuali, e un pò più automatizzate, ne abbiamo anche parlato qui su questo forum.....

    then show your oscam.server and oscam.conf

    oscam.conf

    oscam.server

    then you have in "etc/tuxbox/config/Tivusat_global_emm.log"

    oscam.log

    Edited once, last by sodex ().

    thumbs up 2
    Quote from green-bright-eyes

    Yes, I have, of course, oscam.log but, exactly like in your file, there are many many lines which seem to report Tivusat emm, but those EMMs are all different and all different from the current real emm.

    I don't see any configs or .logs from you - I'm not clairvoyant


    I'm wondering if you're even using an Oscam version of samur with http/https support with a URL where HW_emm is up to date?

    Edited once, last by sodex ().

    Quote from radio3
    Quote from eian00

    so each time the card updates over its original CI, you need to take it out and insert it in the card logger to read the emm. I was thinking there is a less manual solution

    Yes there are less manual solutions, and some more automated ones, we also talked about them here on this forum.....



    Si ci sono soluzioni meno manuali, e un pò più automatizzate, ne abbiamo anche parlato qui su questo forum.....

    Pardon, I'm new, where did you talk about that? Thank's

    Quote from sodex
    Quote from green-bright-eyes

    Yes, I have, of course, oscam.log but, exactly like in your file, there are many many lines which seem to report Tivusat emm, but those EMMs are all different and all different from the current real emm.

    I don't see any configs or .logs from you - I'm not clairvoyant


    I'm wondering if you're even using an Oscam version of samur with http/https support with a URL where HW_emm is up to date?

    Sure but I'm at work now and I can't edit my file to hide my two cards data. I'll attach it as soon as possible.

    linuxsat-support.com/thread/157564/
    Quote from green-bright-eyes
    Quote from sodex
    Quote from green-bright-eyes

    Yes, I have, of course, oscam.log but, exactly like in your file, there are many many lines which seem to report Tivusat emm, but those EMMs are all different and all different from the current real emm.

    I don't see any configs or .logs from you - I'm not clairvoyant


    I'm wondering if you're even using an Oscam version of samur with http/https support with a URL where HW_emm is up to date?

    Sure but I'm at work now and I can't edit my file to hide my two cards data. I'll attach it as soon as possible.

    Here it is the log. There are many lines about emm, all starting with "82 70 8E 00 00 00 00 00...." but all different and, above all, all different from the last EMMs I know.

    Quote from green-bright-eyes

    Here it is the log. There are many lines about emm, all starting with "82 70 8E 00 00 00 00 00...." but all different and, above all, all different from the last EMMs I know.

    the emms in your oscam.log are all not HW_emm - I showed you in #991 oscam.log what it looks like when the HW_emm is downloaded and sent to the card

    oscam.log - download and send

    why this is not the case for you - no idea, you do not show your configs

    there you have the download and send in it

    even with new HW_emm from 27.09.

    then you don't need what I sent via PM anymore - it works

    Link no longer valid.. can someone upload this script again ? Even better if the script was translated in English ;-)

Your resource for OSCam-EMU softcam

Find configs, downloads, tutorials, and support for emulation setup, IPTV decoding, and extended protocol support. Master emulation and extended decoding with OSCam-EMU. Access dedicated support, configs, tutorials, and downloads for enhanced IPTV and service access.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login