183D/183E EMM Activation via the http/https server with OSCam

There are 787 replies in this Thread which was already clicked 148,337 times. The last Post () by gull0815.

    Quote from sackisch

    Will you build the http-patch by default in further oscams from you?

    Quote from sackisch

    Or will you open a new thread with the final solution which you will update in case of new trunk-oscam?

    No. it will not be default,

    but the versions with http-patch will be posted only for the users who need it and also only in this thread.


    Quote from sackisch

    Or is it still beta?

    it's perfect.


    Thanks,

    Hello Everyone,


    I'm having difficulties getting my Tivù SAT Gold card to work using the provided guide. I'm using the Zgemma H9.2H decoder with OpenATV 7.3. While I did install the oscam stable from the softcam plugins, I later replaced it with the ARM version mentioned in this thread (OSCam-11724-798 armv7ve OpenSSL-1.0.2 libusb). After configuring the server files as recommended, I'm only able to access Rai channels 1, 2, and 3.


    [reader]

    label = Tivusat_183E

    protocol = internal

    device = /dev/sci0

    autospeed = 0

    caid = 183E

    rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD86B595B366C35716ABC91FA3DC159C9F4D8164B5

    emm_url = https://rentry.co/ognzc/raw

    emm_reload_minute = 10

    detect = cd

    mhz = 368

    cardmhz = 368

    nagra_read = 1

    ident = 183E:000000,005411

    group = 1

    emmcache = 1,1,2,0

    saveemm-unknown = 1

    saveemm-u = 1

    saveemm-s = 1

    saveemm-g = 1

    auprovid = 005411


    Would anyone be kind enough to assist me with this issue?

    Additionally, I tried configuring using the Remote activation (client side) but am unsure about the correct inputs for 'Host' and 'Port'. I assume 'Host' is my decoder's IP address, but what should I input for 'Port'?


    Thank you!

    but to work this emm via http do you need to have a specific version of oscam 11724? mine is an Axas with Oscam already on board 11724-r798 armv7.


    :Translate:

    Edited once, last by oktus: Please respect the forum rules and post in English ().

    emm_reload_minute = 15

    ecmwhitelist = 91

    ecmheaderwhitelist = 80308ED387,81308ED387

    detect = cd

    nagra_read = 2

    group = 1

    emmcache = 1,2,2,0

    auprovid = 005411



    ok..... :head banger: :head banger:

    VuSolo_VuSOLO.PRO_VuZero_VuSOLO2 SE_DR.800sim japar ed 800SEsim a8p_Mutant 51_4k_GB.UE.4k_DM.920
    clapping hands 1 Like 1

    Thank you so much!!!

    Now, it is working!

    Hi Samur,



    Would you share/recompile the OSCam-11724-798 (armv7ve OpenSSL-1.0.2 libusb)
    With support of cardreader_pcsc.

    I am using the version you have but it doesn't have this enabled.

    Can you help (even privately if you don't want mess this thread with slightly unrelated request.


    thanks in advance

    Hi Samur,

    I need the OSCam-11724-798 armv7-linux-gnueabihf for Raspberry 2b with Smargo to use an old 183D found in old decoder not still blocked .

    Thank you in advance for your great job.

    EDIT: OSCam-11724-798 (armv7ve OpenSSL-1.1.1 libusb) works fine!

    Edited 3 times, last by ursus ().

    ...salve, qualcuno di Voi potrebbe indicarmi le oscam.bin da utilizzare x ottenere emm di attivazione da server x decoder ZGemma H7S e Octagon SF8008...ho provato un paio di armv7ve qui riportate, ma non vengono riconosciute (immagine openpli 8.3)...grz in anticipo x la disponibilità...


    ...hello, could some of you tell me the oscam.bin to use to get activation emms from server for ZGemma H7S and Octagon SF8008 decoders...I tried a couple of armv7ve listed here, but they are not recognized (openpli 8.3 image )...thanks in advance for availability...

    Quote from thechemist1964

    ...salve, qualcuno di Voi potrebbe indicarmi le oscam.bin da utilizzare x ottenere emm di attivazione da server x decoder ZGemma H7S e Octagon SF8008...ho provato un paio di armv7ve qui riportate, ma non vengono riconosciute (immagine openpli 8.3)...grz in anticipo x la disponibilità...


    ...hello, could some of you tell me the oscam.bin to use to get activation emms from server for ZGemma H7S and Octagon SF8008 decoders...I tried a couple of armv7ve listed here, but they are not recognized (openpli 8.3 image )...thanks in advance for availability...


    You have this decoder :

    -ZGemma H7S
    -Octagon SF8008.


    To know the architecture of the boxes on which oscam to choose you can choose:


    post here Output from Telnet command:


    for dreambox and images associated with it

    dpkg --print-architecture | grep -iE "arm|aarch64|mips|cortex|sh4|sh_4"



    for other boxes (images like pli - atv etc..)

    opkg print-architecture | grep -iE "arm|aarch64|mips|cortex|h4|sh_4"



    and this command telnet find your SSL library


    ls -l /usr/lib/libss*.*

    nella foto che ai postato ai la tua soluzione c'è leggi attentamente...

    le prime due righe...ti da' indicazione del bin che dovrai

    cercare nelle Oscam imprima pagina.

    VuSolo_VuSOLO.PRO_VuZero_VuSOLO2 SE_DR.800sim japar ed 800SEsim a8p_Mutant 51_4k_GB.UE.4k_DM.920

    ok


    libssl.so.1.1


    now is simply select your bin oscam


    from here

    Post
    183D/183E EMM Activation via the http/https server with OSCam
    :New3:

    Now, you can download emms from http and https pages
    both local and remote, clients can send emm, means remote clients using: cccam, newcamd and camd3x.

    emm is only added to the card if your reader is : 183D or 183E,
    users also can create there own "URL" example:
    For rentry: emm_url = https://rentry.co/"xxxx"/raw
    for github: emm_url = https://raw.githubusercontent.com/"xxxxx/xxxx..."
    #####
    1)_Locally Activation (server side):
    (Code, 25 lines)


    ##


    2)_ Remotely activation (client side):
    clients (cccam,…
    samur


    try yourself ;)

    Do not take even a minute away from the affection of those who love you: you would not have time to recover it!


    Have a Good Trip


    GOOD VPN



    DMU


    logo_corvo.png


OSCam-EMU Support Forum

Configs, discussion, downloads and guides for OSCam-EMU Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login